ansible / ansible.builtin / v2.4.4.0-1 / module / eos_command Run arbitrary commands on an Arista EOS device | "added in version" 2.1 of ansible.builtin" Authors: Peter Sprygada (@privateip) preview | supported by networkansible.builtin.eos_command (v2.4.4.0-1) — module
pip
Install with pip install ansible==2.4.4.0.post1
Sends an arbitrary set of commands to an EOS node and returns the results read from the device. This module includes an argument that will cause the module to wait for a specific condition before returning or timing out if the condition is not met.
- name: run show version on remote devices eos_command: commands: show version
- name: run show version and check to see if output contains Arista eos_command: commands: show version wait_for: result[0] contains Arista
- name: run multiple commands on remote nodes eos_command: commands: - show version - show interfaces
- name: run multiple commands and evaluate the output eos_command: commands: - show version - show interfaces wait_for: - result[0] contains Arista - result[1] contains Loopback0
- name: run commands and specify the output format eos_command: commands: - command: show version output: json
match: choices: - any - all default: all description: - The I(match) argument is used in conjunction with the I(wait_for) argument to specify the match policy. Valid values are C(all) or C(any). If the value is set to C(all) then all conditionals in the I(wait_for) must be satisfied. If the value is set to C(any) then only one of the values must be satisfied. required: false version_added: '2.2' version_added_collection: ansible.builtin retries: default: 10 description: - Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the I(wait_for) conditionals. required: false commands: description: - The commands to send to the remote EOS device over the configured provider. The resulting output from the command is returned. If the I(wait_for) argument is provided, the module is not returned until the condition is satisfied or the number of I(retries) has been exceeded. required: true interval: default: 1 description: - Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again. required: false provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).' - 'Starting with Ansible 2.6 we recommend using C(connection: httpapi) for eAPI.' - This option will be removed in a release after 2022-06-01. - For more information please see the L(EOS Platform Options guide, ../network/user_guide/platform_eos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. type: str authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either I(cli) or I(eapi) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: default: 0 description: - Specifies the port to use when building the connection to the remote device. This value applies to either I(cli) or I(eapi). - The port value will default to the appropriate transport common port if none is provided in the task (cli=22, http=80, https=443). type: int ssh_keyfile: description: - Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for I(cli) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: path timeout: description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. type: int transport: choices: - cli - eapi default: cli description: - Configures the transport connection to use when connecting to the remote device. type: str use_proxy: default: true description: - If C(no), the environment variables C(http_proxy) and C(https_proxy) will be ignored. type: bool use_ssl: default: true description: - Configures the I(transport) to use SSL if set to C(yes) only when the C(transport=eapi). If the transport argument is not eapi, this value is ignored. type: bool username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str validate_certs: default: true description: - If C(no), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored. type: bool type: dict wait_for: aliases: - waitfor default: null description: - Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples. required: false version_added: '2.2' version_added_collection: ansible.builtin
failed_conditions: description: The list of conditionals that have failed returned: failed sample: - '...' - '...' type: list stdout: description: The set of responses from the commands returned: always apart from low level errors (such as action plugin) sample: - '...' - '...' type: list stdout_lines: description: The value of stdout split into a list returned: always apart from low level errors (such as action plugin) sample: - - '...' - '...' - - '...' - - '...' type: list