ansible / ansible.builtin / v2.6.0 / module / ce_ospf Manages configuration of an OSPF instance on HUAWEI CloudEngine switches. | "added in version" 2.4 of ansible.builtin" Authors: QijunPan (@CloudEngine-Ansible) preview | supported by communityansible.builtin.ce_ospf (v2.6.0) — module
pip
Install with pip install ansible==2.6.0
Manages configuration of an OSPF instance on HUAWEI CloudEngine switches.
- name: ospf module test hosts: cloudengine connection: local gather_facts: no vars: cli: host: "{{ inventory_hostname }}" port: "{{ ansible_ssh_port }}" username: "{{ username }}" password: "{{ password }}" transport: cli tasks: - name: Configure ospf ce_ospf: process_id: 1 area: 100 state: present provider: "{{ cli }}"
addr: description: - Specifies the address of the network segment where the interface resides. The value is in dotted decimal notation. area: description: - Specifies the area ID. The area with the area-id being 0 is a backbone area. Valid values are a string, formatted as an IP address (i.e. "0.0.0.0") or as an integer between 1 and 4294967295. mask: description: - IP network wildcard bits in decimal format between 0 and 32. state: choices: - present - absent default: present description: - Determines whether the config should be present or not on the device. auth_mode: choices: - none - hmac-sha256 - md5 - hmac-md5 - simple description: - Specifies the authentication type. process_id: description: - Specifies a process ID. The value is an integer ranging from 1 to 4294967295. required: true auth_key_id: description: - Authentication key id when C(auth_mode) is 'hmac-sha256', 'md5' or 'hmac-md5. Valid value is an integer is in the range from 1 to 255. nexthop_addr: description: - IPv4 address for configure next-hop address's weight. Valid values are a string, formatted as an IP address. auth_text_md5: description: - Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported. nexthop_weight: description: - Indicates the weight of the next hop. The smaller the value is, the higher the preference of the route is. It is an integer that ranges from 1 to 254. auth_text_simple: description: - Specifies a password for simple authentication. The value is a string of 1 to 8 characters. max_load_balance: description: - The maximum number of paths for forward packets over multiple paths. Valid value is an integer in the range from 1 to 64.
changed: description: check to see if a change was made on the device returned: always sample: true type: boolean end_state: description: k/v pairs of configuration after module execution returned: verbose mode sample: areas: - areaId: 0.0.0.100 areaType: Normal max_load_balance: '32' nexthops: [] process_id: '1' type: dict existing: description: k/v pairs of existing configuration returned: verbose mode sample: areas: [] max_load_balance: '32' nexthops: [] process_id: '1' type: dict proposed: description: k/v pairs of parameters passed into module returned: verbose mode sample: area: '100' process_id: '1' type: dict updates: description: commands sent to the device returned: always sample: - ospf 1 - area 0.0.0.100 type: list