ansible / ansible.builtin / v2.6.10 / module / eos_l3_interface Manage L3 interfaces on Arista EOS network devices. | "added in version" 2.5 of ansible.builtin" Authors: Ganesh Nalawade (@ganeshrn) preview | supported by networkansible.builtin.eos_l3_interface (v2.6.10) — module
pip
Install with pip install ansible==2.6.10
This module provides declarative management of L3 interfaces on Arista EOS network devices.
- name: Remove ethernet1 IPv4 and IPv6 address eos_l3_interface: name: ethernet1 state: absent
- name: Set ethernet1 IPv4 address eos_l3_interface: name: ethernet1 ipv4: 192.168.0.1/24
- name: Set ethernet1 IPv6 address eos_l3_interface: name: ethernet1 ipv6: "fd5d:12c9:2201:1::1/64"
- name: Set IP addresses on aggregate eos_l3_interface: aggregate: - { name: ethernet1, ipv4: 192.168.2.10/24 } - { name: ethernet1, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate eos_l3_interface: aggregate: - { name: ethernet1, ipv4: 192.168.2.10/24 } - { name: ethernet1, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" } state: absent
ipv4: description: - IPv4 address to be set for the L3 interface mentioned in I(name) option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24 ipv6: description: - IPv6 address to be set for the L3 interface mentioned in I(name) option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64 name: description: - Name of the L3 interface to be configured eg. ethernet1 state: choices: - present - absent default: present description: - State of the L3 interface configuration. It indicates if the configuration should be present or absent on remote device. provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).' - 'Starting with Ansible 2.6 we recommend using C(connection: httpapi) for eAPI.' - This option will be removed in a release after 2022-06-01. - For more information please see the L(EOS Platform Options guide, ../network/user_guide/platform_eos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. type: str authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. required: true type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either I(cli) or I(eapi) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: default: 0 description: - Specifies the port to use when building the connection to the remote device. This value applies to either I(cli) or I(eapi). - The port value will default to the appropriate transport common port if none is provided in the task (cli=22, http=80, https=443). type: int ssh_keyfile: description: - Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for I(cli) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: path timeout: description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. type: int transport: choices: - cli - eapi default: cli description: - Configures the transport connection to use when connecting to the remote device. required: true type: str use_proxy: default: true description: - If C(no), the environment variables C(http_proxy) and C(https_proxy) will be ignored. type: bool use_ssl: default: true description: - Configures the I(transport) to use SSL if set to C(yes) only when the C(transport=eapi). If the transport argument is not eapi, this value is ignored. type: bool username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the eAPI authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str validate_certs: default: true description: - If C(no), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not eapi, this value is ignored. type: bool type: dict aggregate: description: - List of L3 interfaces definitions. Each of the entry in aggregate list should define name of interface C(name) and a optional C(ipv4) or C(ipv6) address.
commands: description: The list of configuration mode commands to send to the device returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface ethernet1 - ip address 192.168.0.1/24 - ipv6 address fd5d:12c9:2201:1::1/64 type: list