ansible / ansible.builtin / v2.6.10 / module / nxos_facts Gets facts about NX-OS switches | "added in version" 2.1 of ansible.builtin" Authors: Jason Edelman (@jedelman8), Gabriele Gerbino (@GGabriele) preview | supported by networkansible.builtin.nxos_facts (v2.6.10) — module
pip
Install with pip install ansible==2.6.10
Collects facts from Cisco Nexus devices running the NX-OS operating system. Fact collection is supported over both Cli and Nxapi transports. This module prepends all of the base network fact keys with C(ansible_net_<fact>). The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.
- nxos_facts: gather_subset: all
# Collect only the config and default facts - nxos_facts: gather_subset: - config
# Do not collect hardware facts - nxos_facts: gather_subset: - "!hardware"
provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).' - 'Starting with Ansible 2.6 we recommend using C(connection: httpapi) for NX-API.' - This option will be removed in a release after 2022-06-01. - For more information please see the U(https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. type: str authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either I(cli) or I(nxapi) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: description: - Specifies the port to use when building the connection to the remote device. This value applies to either I(cli) or I(nxapi). The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443). type: int ssh_keyfile: description: - Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the I(cli) transport. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: str timeout: description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc). type: int transport: choices: - cli - nxapi default: cli description: - Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. type: str use_proxy: default: true description: - If C(no), the environment variables C(http_proxy) and C(https_proxy) will be ignored. type: bool use_ssl: default: false description: - Configures the I(transport) to use SSL if set to C(yes) only when the C(transport=nxapi), otherwise this value is ignored. type: bool username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str validate_certs: default: false description: - If C(no), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. type: bool type: dict gather_subset: default: '!config' description: - When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, legacy, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial C(M(!)) to specify that a specific subset should not be collected. required: false version_added: '2.2' version_added_collection: ansible.builtin
ansible_net_all_ipv4_addresses: description: All IPv4 addresses configured on the device returned: when interfaces is configured type: list ansible_net_all_ipv6_addresses: description: All IPv6 addresses configured on the device returned: when interfaces is configured type: list ansible_net_config: description: The current active config from the device returned: when config is configured type: str ansible_net_filesystems: description: All file system names available on the device returned: when hardware is configured type: list ansible_net_gather_subset: description: The list of fact subsets collected from the device returned: always type: list ansible_net_hostname: description: The configured hostname of the device returned: always type: string ansible_net_image: description: The image file the device is running returned: always type: string ansible_net_interfaces: description: A hash of all interfaces running on the system returned: when interfaces is configured type: dict ansible_net_memfree_mb: description: The available free memory on the remote device in Mb returned: when hardware is configured type: int ansible_net_memtotal_mb: description: The total memory on the remote device in Mb returned: when hardware is configured type: int ansible_net_model: description: The model name returned from the device returned: always type: str ansible_net_neighbors: description: The list of LLDP/CDP neighbors from the remote device returned: when interfaces is configured type: dict ansible_net_serialnum: description: The serial number of the remote device returned: always type: str ansible_net_version: description: The operating system version running on the remote device returned: always type: str fan_info: description: A hash of facts about fans in the remote device returned: when legacy is configured type: dict hostname: description: The configured hostname of the remote device returned: when legacy is configured type: dict interfaces_list: description: The list of interface names on the remote device returned: when legacy is configured type: dict kickstart: description: The software version used to boot the system returned: when legacy is configured type: str module: description: A hash of facts about the modules in a remote device returned: when legacy is configured type: dict platform: description: The hardware platform reported by the remote device returned: when legacy is configured type: str power_supply_info: description: A hash of facts about the power supplies in the remote device returned: when legacy is configured type: str vlan_list: description: The list of VLAN IDs configured on the remote device returned: when legacy is configured type: list