ansible / ansible.builtin / v2.6.20 / module / ce_switchport Manages Layer 2 switchport interfaces on HUAWEI CloudEngine switches. | "added in version" 2.4 of ansible.builtin" Authors: QijunPan (@CloudEngine-Ansible) preview | supported by communityansible.builtin.ce_switchport (v2.6.20) — module
pip
Install with pip install ansible==2.6.20
Manages Layer 2 switchport interfaces on HUAWEI CloudEngine switches.
- name: switchport module test hosts: cloudengine connection: local gather_facts: no vars: cli: host: "{{ inventory_hostname }}" port: "{{ ansible_ssh_port }}" username: "{{ username }}" password: "{{ password }}" transport: cli tasks: - name: Ensure 10GE1/0/22 is in its default switchport state ce_switchport: interface: 10GE1/0/22 state: unconfigured provider: '{{ cli }}' - name: Ensure 10GE1/0/22 is configured for access vlan 20 ce_switchport: interface: 10GE1/0/22 mode: access access_vlan: 20 provider: '{{ cli }}' - name: Ensure 10GE1/0/22 only has vlans 5-10 as trunk vlans ce_switchport: interface: 10GE1/0/22 mode: trunk native_vlan: 10 trunk_vlans: 5-10 provider: '{{ cli }}' - name: Ensure 10GE1/0/22 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged) ce_switchport: interface: 10GE1/0/22 mode: trunk native_vlan: 10 trunk_vlans: 2-50 provider: '{{ cli }}' - name: Ensure these VLANs are not being tagged on the trunk ce_switchport: interface: 10GE1/0/22 mode: trunk trunk_vlans: 51-4000 state: absent provider: '{{ cli }}'
mode: choices: - access - trunk description: - The link type of an interface. state: choices: - present - absent - unconfigured default: present description: - Manage the state of the resource. interface: description: - Full name of the interface, i.e. 40GE1/0/22. required: true access_vlan: description: - If C(mode=access), used as the access VLAN ID, in the range from 1 to 4094. native_vlan: description: - If C(mode=trunk), used as the trunk native VLAN ID, in the range from 1 to 4094. trunk_vlans: description: - If C(mode=trunk), used as the VLAN range to ADD or REMOVE from the trunk, such as 2-10 or 2,5,10-15, etc.
changed: description: check to see if a change was made on the device returned: always sample: true type: boolean end_state: description: k/v pairs of switchport after module execution returned: always sample: access_vlan: '20' interface: 10GE1/0/22 mode: access switchport: enable type: dict existing: description: k/v pairs of existing switchport returned: always sample: access_vlan: '10' interface: 10GE1/0/22 mode: access switchport: enable type: dict proposed: description: k/v pairs of parameters passed into module returned: always sample: access_vlan: '20' interface: 10GE1/0/22 mode: access type: dict updates: description: command string sent to the device returned: always sample: - 10GE1/0/22 - port default vlan 20 type: list