ansible / ansible.builtin / v2.8.11 / module / slxos_linkagg Manage link aggregation groups on Extreme Networks SLX-OS network devices | "added in version" 2.6 of ansible.builtin" Authors: Matthew Stone (@bigmstone) preview | supported by communityansible.builtin.slxos_linkagg (v2.8.11) — module
pip
Install with pip install ansible==2.8.11
This module provides declarative management of link aggregation groups on Extreme Networks SLX-OS network devices.
- name: create link aggregation group slxos_linkagg: group: 10 state: present
- name: delete link aggregation group slxos_linkagg: group: 10 state: absent
- name: set link aggregation group to members slxos_linkagg: group: 200 mode: active members: - Ethernet 0/1 - Ethernet 0/2
- name: remove link aggregation group from Ethernet 0/1 slxos_linkagg: group: 200 mode: active members: - Ethernet 0/1
- name: Create aggregate of linkagg definitions slxos_linkagg: aggregate: - { group: 3, mode: on, members: [Ethernet 0/1] } - { group: 100, mode: passive, members: [Ethernet 0/2] }
mode: choices: - active - 'on' - passive description: - Mode of the link aggregation group. group: description: - Channel-group number for the port-channel Link aggregation group. Range 1-1024. purge: description: - Purge links not defined in the I(aggregate) parameter. type: bool state: choices: - present - absent default: present description: - State of the link aggregation group. members: description: - List of members of the link aggregation group. aggregate: description: List of link aggregation definitions.
commands: description: The list of configuration mode commands to send to the device returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface port-channel 30 - interface Ethernet 0/3 - channel-group 30 mode on - no interface port-channel 30 type: list