ansible / ansible.builtin / v2.8.13 / module / fortios_firewall_vip6 Configure virtual IP for IPv6 in Fortinet's FortiOS and FortiGate. | "added in version" 2.8 of ansible.builtin" Authors: Miguel Angel Munoz (@mamunozgonzalez), Nicolas Thomas (@thomnico) preview | supported by communityansible.builtin.fortios_firewall_vip6 (v2.8.13) — module
pip
Install with pip install ansible==2.8.13
This module is able to configure a FortiGate or FortiOS by allowing the user to configure firewall feature and vip6 category. Examples includes all options and need to be adjusted to datasources before usage. Tested with FOS v6.0.2
- hosts: localhost vars: host: "192.168.122.40" username: "admin" password: "" vdom: "root" tasks: - name: Configure virtual IP for IPv6. fortios_firewall_vip6: host: "{{ host }}" username: "{{ username }}" password: "{{ password }}" vdom: "{{ vdom }}" firewall_vip6: state: "present" arp-reply: "disable" color: "4" comment: "Comment." extip: "<your_own_value>" extport: "<your_own_value>" http-cookie-age: "8" http-cookie-domain: "<your_own_value>" http-cookie-domain-from-host: "disable" http-cookie-generation: "11" http-cookie-path: "<your_own_value>" http-cookie-share: "disable" http-ip-header: "enable" http-ip-header-name: "<your_own_value>" http-multiplex: "enable" https-cookie-secure: "disable" id: "18" ldb-method: "static" mappedip: "<your_own_value>" mappedport: "<your_own_value>" max-embryonic-connections: "22" monitor: - name: "default_name_24 (source firewall.ldb-monitor.name)" name: "default_name_25" outlook-web-access: "disable" persistence: "none" portforward: "disable" protocol: "tcp" realservers: - client-ip: "<your_own_value>" healthcheck: "disable" holddown-interval: "33" http-host: "myhostname" id: "35" ip: "<your_own_value>" max-connections: "37" monitor: "<your_own_value> (source firewall.ldb-monitor.name)" port: "39" status: "active" weight: "41" server-type: "http" src-filter: - range: "<your_own_value>" ssl-algorithm: "high" ssl-certificate: "<your_own_value> (source vpn.certificate.local.name)" ssl-cipher-suites: - cipher: "TLS-RSA-WITH-3DES-EDE-CBC-SHA" priority: "49" versions: "ssl-3.0" ssl-client-fallback: "disable" ssl-client-renegotiation: "allow" ssl-client-session-state-max: "53" ssl-client-session-state-timeout: "54" ssl-client-session-state-type: "disable" ssl-dh-bits: "768" ssl-hpkp: "disable" ssl-hpkp-age: "58" ssl-hpkp-backup: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)" ssl-hpkp-include-subdomains: "disable" ssl-hpkp-primary: "<your_own_value> (source vpn.certificate.local.name vpn.certificate.ca.name)" ssl-hpkp-report-uri: "<your_own_value>" ssl-hsts: "disable" ssl-hsts-age: "64" ssl-hsts-include-subdomains: "disable" ssl-http-location-conversion: "enable" ssl-http-match-host: "enable" ssl-max-version: "ssl-3.0" ssl-min-version: "ssl-3.0" ssl-mode: "half" ssl-pfs: "require" ssl-send-empty-frags: "enable" ssl-server-algorithm: "high" ssl-server-cipher-suites: - cipher: "TLS-RSA-WITH-3DES-EDE-CBC-SHA" priority: "76" versions: "ssl-3.0" ssl-server-max-version: "ssl-3.0" ssl-server-min-version: "ssl-3.0" ssl-server-session-state-max: "80" ssl-server-session-state-timeout: "81" ssl-server-session-state-type: "disable" type: "static-nat" uuid: "<your_own_value>" weblogic-server: "disable" websphere-server: "disable"
host: description: - FortiOS or FortiGate ip address. required: true vdom: default: root description: - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. https: default: false description: - Indicates if the requests towards FortiGate must use HTTPS protocol type: bool password: default: '' description: - FortiOS or FortiGate password. username: description: - FortiOS or FortiGate username. required: true firewall_vip6: default: null description: - Configure virtual IP for IPv6. suboptions: arp-reply: choices: - disable - enable description: - Enable to respond to ARP requests for this virtual IP address. Enabled by default. color: description: - Color of icon on the GUI. comment: description: - Comment. extip: description: - IP address or address range on the external interface that you want to map to an address or address range on the destination network. extport: description: - Incoming port number range that you want to map to a port number range on the destination network. http-cookie-age: description: - Time in minutes that client web browsers should keep a cookie. Default is 60 seconds. 0 = no time limit. http-cookie-domain: description: - Domain that HTTP cookie persistence should apply to. http-cookie-domain-from-host: choices: - disable - enable description: - Enable/disable use of HTTP cookie domain from host field in HTTP. http-cookie-generation: description: - Generation of HTTP cookie to be accepted. Changing invalidates all existing cookies. http-cookie-path: description: - Limit HTTP cookie persistence to the specified path. http-cookie-share: choices: - disable - same-ip description: - Control sharing of cookies across virtual servers. same-ip means a cookie from one virtual server can be used by another. Disable stops cookie sharing. http-ip-header: choices: - enable - disable description: - For HTTP multiplexing, enable to add the original client IP address in the XForwarded-For HTTP header. http-ip-header-name: description: - For HTTP multiplexing, enter a custom HTTPS header name. The original client IP address is added to this header. If empty, X-Forwarded-For is used. http-multiplex: choices: - enable - disable description: - Enable/disable HTTP multiplexing. https-cookie-secure: choices: - disable - enable description: - Enable/disable verification that inserted HTTPS cookies are secure. id: description: - Custom defined ID. ldb-method: choices: - static - round-robin - weighted - least-session - least-rtt - first-alive - http-host description: - Method used to distribute sessions to real servers. mappedip: description: - Mapped IP address range in the format startIP-endIP. mappedport: description: - Port number range on the destination network to which the external port number range is mapped. max-embryonic-connections: description: - Maximum number of incomplete connections. monitor: description: - Name of the health check monitor to use when polling to determine a virtual server's connectivity status. suboptions: name: description: - Health monitor name. Source firewall.ldb-monitor.name. required: true name: description: - Virtual ip6 name. required: true outlook-web-access: choices: - disable - enable description: - Enable to add the Front-End-Https header for Microsoft Outlook Web Access. persistence: choices: - none - http-cookie - ssl-session-id description: - Configure how to make sure that clients connect to the same server every time they make a request that is part of the same session. portforward: choices: - disable - enable description: - Enable port forwarding. protocol: choices: - tcp - udp - sctp description: - Protocol to use when forwarding packets. realservers: description: - Select the real servers that this server load balancing VIP will distribute traffic to. suboptions: client-ip: description: - Only clients in this IP range can connect to this real server. healthcheck: choices: - disable - enable - vip description: - Enable to check the responsiveness of the real server before forwarding traffic. holddown-interval: description: - Time in seconds that the health check monitor continues to monitor an unresponsive server that should be active. http-host: description: - HTTP server domain name in HTTP header. id: description: - Real server ID. required: true ip: description: - IPv6 address of the real server. max-connections: description: - Max number of active connections that can directed to the real server. When reached, sessions are sent to other real servers. monitor: description: - Name of the health check monitor to use when polling to determine a virtual server's connectivity status. Source firewall .ldb-monitor.name. port: description: - Port for communicating with the real server. Required if port forwarding is enabled. status: choices: - active - standby - disable description: - Set the status of the real server to active so that it can accept traffic, or on standby or disabled so no traffic is sent. weight: description: - Weight of the real server. If weighted load balancing is enabled, the server with the highest weight gets more connections. server-type: choices: - http - https - imaps - pop3s - smtps - ssl - tcp - udp - ip description: - Protocol to be load balanced by the virtual server (also called the server load balance virtual IP). src-filter: description: - Source IP6 filter (x:x:x:x:x:x:x:x/x). Separate addresses with spaces. suboptions: range: description: - Source-filter range. required: true ssl-algorithm: choices: - high - medium - low - custom description: - Permitted encryption algorithms for SSL sessions according to encryption strength. ssl-certificate: description: - The name of the SSL certificate to use for SSL acceleration. Source vpn.certificate.local.name. ssl-cipher-suites: description: - SSL/TLS cipher suites acceptable from a client, ordered by priority. suboptions: cipher: choices: - TLS-RSA-WITH-3DES-EDE-CBC-SHA - TLS-DHE-RSA-WITH-DES-CBC-SHA - TLS-DHE-DSS-WITH-DES-CBC-SHA description: - Cipher suite name. priority: description: - SSL/TLS cipher suites priority. required: true versions: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 description: - SSL/TLS versions that the cipher suite can be used with. ssl-client-fallback: choices: - disable - enable description: - Enable/disable support for preventing Downgrade Attacks on client connections (RFC 7507). ssl-client-renegotiation: choices: - allow - deny - secure description: - Allow, deny, or require secure renegotiation of client sessions to comply with RFC 5746. ssl-client-session-state-max: description: - Maximum number of client to FortiGate SSL session states to keep. ssl-client-session-state-timeout: description: - Number of minutes to keep client to FortiGate SSL session state. ssl-client-session-state-type: choices: - disable - time - count - both description: - How to expire SSL sessions for the segment of the SSL connection between the client and the FortiGate. ssl-dh-bits: choices: - 768 - 1024 - 1536 - 2048 - 3072 - 4096 description: - Number of bits to use in the Diffie-Hellman exchange for RSA encryption of SSL sessions. ssl-hpkp: choices: - disable - enable - report-only description: - Enable/disable including HPKP header in response. ssl-hpkp-age: description: - Number of minutes the web browser should keep HPKP. ssl-hpkp-backup: description: - Certificate to generate backup HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name. ssl-hpkp-include-subdomains: choices: - disable - enable description: - Indicate that HPKP header applies to all subdomains. ssl-hpkp-primary: description: - Certificate to generate primary HPKP pin from. Source vpn.certificate.local.name vpn.certificate.ca.name. ssl-hpkp-report-uri: description: - URL to report HPKP violations to. ssl-hsts: choices: - disable - enable description: - Enable/disable including HSTS header in response. ssl-hsts-age: description: - Number of seconds the client should honour the HSTS setting. ssl-hsts-include-subdomains: choices: - disable - enable description: - Indicate that HSTS header applies to all subdomains. ssl-http-location-conversion: choices: - enable - disable description: - Enable to replace HTTP with HTTPS in the reply's Location HTTP header field. ssl-http-match-host: choices: - enable - disable description: - Enable/disable HTTP host matching for location conversion. ssl-max-version: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 description: - Highest SSL/TLS version acceptable from a client. ssl-min-version: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 description: - Lowest SSL/TLS version acceptable from a client. ssl-mode: choices: - half - full description: - Apply SSL offloading between the client and the FortiGate (half) or from the client to the FortiGate and from the FortiGate to the server (full). ssl-pfs: choices: - require - deny - allow description: - Select the cipher suites that can be used for SSL perfect forward secrecy (PFS). Applies to both client and server sessions. ssl-send-empty-frags: choices: - enable - disable description: - Enable/disable sending empty fragments to avoid CBC IV attacks (SSL 3.0 & TLS 1.0 only). May need to be disabled for compatibility with older systems. ssl-server-algorithm: choices: - high - medium - low - custom - client description: - Permitted encryption algorithms for the server side of SSL full mode sessions according to encryption strength. ssl-server-cipher-suites: description: - SSL/TLS cipher suites to offer to a server, ordered by priority. suboptions: cipher: choices: - TLS-RSA-WITH-3DES-EDE-CBC-SHA - TLS-DHE-RSA-WITH-DES-CBC-SHA - TLS-DHE-DSS-WITH-DES-CBC-SHA description: - Cipher suite name. priority: description: - SSL/TLS cipher suites priority. required: true versions: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 description: - SSL/TLS versions that the cipher suite can be used with. ssl-server-max-version: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 - client description: - Highest SSL/TLS version acceptable from a server. Use the client setting by default. ssl-server-min-version: choices: - ssl-3.0 - tls-1.0 - tls-1.1 - tls-1.2 - client description: - Lowest SSL/TLS version acceptable from a server. Use the client setting by default. ssl-server-session-state-max: description: - Maximum number of FortiGate to Server SSL session states to keep. ssl-server-session-state-timeout: description: - Number of minutes to keep FortiGate to Server SSL session state. ssl-server-session-state-type: choices: - disable - time - count - both description: - How to expire SSL sessions for the segment of the SSL connection between the server and the FortiGate. state: choices: - present - absent description: - Indicates whether to create or remove the object type: choices: - static-nat - server-load-balance description: - Configure a static NAT or server load balance VIP. uuid: description: - Universally Unique Identifier (UUID; automatically assigned but can be manually reset). weblogic-server: choices: - disable - enable description: - Enable to add an HTTP header to indicate SSL offloading for a WebLogic server. websphere-server: choices: - disable - enable description: - Enable to add an HTTP header to indicate SSL offloading for a WebSphere server.
build: description: Build number of the fortigate image returned: always sample: '1547' type: str http_method: description: Last method used to provision the content into FortiGate returned: always sample: PUT type: str http_status: description: Last result given by FortiGate on last operation applied returned: always sample: '200' type: str mkey: description: Master key (id) used in the last call to FortiGate returned: success sample: key1 type: str name: description: Name of the table used to fulfill the request returned: always sample: urlfilter type: str path: description: Path of the table used to fulfill the request returned: always sample: webfilter type: str revision: description: Internal revision number returned: always sample: 17.0.2.10658 type: str serial: description: Serial number of the unit returned: always sample: FGVMEVYYQT3AB5352 type: str status: description: Indication of the operation's result returned: always sample: success type: str vdom: description: Virtual domain used returned: always sample: root type: str version: description: Version of the FortiGate returned: always sample: v5.6.3 type: str