ansible / ansible.builtin / v2.8.13 / module / ios_l3_interface Manage Layer-3 interfaces on Cisco IOS network devices. | "added in version" 2.5 of ansible.builtin" Authors: Ganesh Nalawade (@ganeshrn) preview | supported by networkansible.builtin.ios_l3_interface (v2.8.13) — module
pip
Install with pip install ansible==2.8.13
This module provides declarative management of Layer-3 interfaces on IOS network devices.
- name: Remove GigabitEthernet0/3 IPv4 and IPv6 address ios_l3_interface: name: GigabitEthernet0/3 state: absent
- name: Set GigabitEthernet0/3 IPv4 address ios_l3_interface: name: GigabitEthernet0/3 ipv4: 192.168.0.1/24
- name: Set GigabitEthernet0/3 IPv6 address ios_l3_interface: name: GigabitEthernet0/3 ipv6: "fd5d:12c9:2201:1::1/64"
- name: Set GigabitEthernet0/3 in dhcp ios_l3_interface: name: GigabitEthernet0/3 ipv4: dhcp ipv6: dhcp
- name: Set interface Vlan1 (SVI) IPv4 address ios_l3_interface: name: Vlan1 ipv4: 192.168.0.5/24
- name: Set IP addresses on aggregate ios_l3_interface: aggregate: - { name: GigabitEthernet0/3, ipv4: 192.168.2.10/24 } - { name: GigabitEthernet0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate ios_l3_interface: aggregate: - { name: GigabitEthernet0/3, ipv4: 192.168.2.10/24 } - { name: GigabitEthernet0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" } state: absent
ipv4: description: - IPv4 address to be set for the Layer-3 interface mentioned in I(name) option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24 ipv6: description: - IPv6 address to be set for the Layer-3 interface mentioned in I(name) option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64 name: description: - Name of the Layer-3 interface to be configured eg. GigabitEthernet0/2 state: choices: - present - absent default: present description: - State of the Layer-3 interface configuration. It indicates if the configuration should be present or absent on remote device. aggregate: description: - List of Layer-3 interfaces definitions. Each of the entry in aggregate list should define name of interface C(name) and a optional C(ipv4) or C(ipv6) address.
commands: description: The list of configuration mode commands to send to the device returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface GigabitEthernet0/2 - ip address 192.168.0.1 255.255.255.0 - ipv6 address fd5d:12c9:2201:1::1/64 type: list