ansible / ansible.builtin / v2.8.13 / module / slxos_interface Manage Interfaces on Extreme SLX-OS network devices | "added in version" 2.6 of ansible.builtin" Authors: Lindsay Hill (@LindsayHill) preview | supported by communityansible.builtin.slxos_interface (v2.8.13) — module
pip
Install with pip install ansible==2.8.13
This module provides declarative management of Interfaces on Extreme SLX-OS network devices.
- name: configure interface slxos_interface: name: Ethernet 0/2 description: test-interface speed: 1000 mtu: 9216
- name: remove interface slxos_interface: name: Loopback 9 state: absent
- name: make interface up slxos_interface: name: Ethernet 0/2 enabled: True
- name: make interface down slxos_interface: name: Ethernet 0/2 enabled: False
- name: Check intent arguments slxos_interface: name: Ethernet 0/2 state: up tx_rate: ge(0) rx_rate: le(0)
- name: Check neighbors intent arguments slxos_interface: name: Ethernet 0/41 neighbors: - port: Ethernet 0/41 host: SLX
- name: Config + intent slxos_interface: name: Ethernet 0/2 enabled: False state: down
- name: Add interface using aggregate slxos_interface: aggregate: - { name: Ethernet 0/1, mtu: 1548, description: test-interface-1 } - { name: Ethernet 0/2, mtu: 1548, description: test-interface-2 } speed: 10000 state: present
- name: Delete interface using aggregate slxos_interface: aggregate: - name: Loopback 9 - name: Loopback 10 state: absent
mtu: description: - Maximum size of transmit packet. name: description: - Name of the Interface. required: true delay: default: 10 description: - Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are I(state) with values C(up)/C(down), I(tx_rate) and I(rx_rate). speed: description: - Interface link speed. state: choices: - present - absent - up - down default: present description: - State of the Interface configuration, C(up) means present and operationally up and C(down) means present and operationally C(down) enabled: default: true description: - Interface link status. type: bool rx_rate: description: - Receiver rate in bits per second (bps). tx_rate: description: - Transmit rate in bits per second (bps). aggregate: description: List of Interfaces definitions. neighbors: description: - Check the operational state of given interface C(name) for LLDP neighbor. - The following suboptions are available. suboptions: host: description: - LLDP neighbor host for given interface C(name). port: description: - LLDP neighbor port to which given interface C(name) is connected. description: description: - Description of Interface.
commands: description: The list of configuration mode commands to send to the device. returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface Ethernet 0/2 - description test-interface - mtu 1548 type: list