ansible / ansible.builtin / v2.8.15 / module / fortios_vpn_ipsec_phase2_interface Configure VPN autokey tunnel in Fortinet's FortiOS and FortiGate. | "added in version" 2.8 of ansible.builtin" Authors: Miguel Angel Munoz (@mamunozgonzalez), Nicolas Thomas (@thomnico) preview | supported by communityansible.builtin.fortios_vpn_ipsec_phase2_interface (v2.8.15) — module
pip
Install with pip install ansible==2.8.15
This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify vpn_ipsec feature and phase2_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2
- hosts: localhost vars: host: "192.168.122.40" username: "admin" password: "" vdom: "root" tasks: - name: Configure VPN autokey tunnel. fortios_vpn_ipsec_phase2_interface: host: "{{ host }}" username: "{{ username }}" password: "{{ password }}" vdom: "{{ vdom }}" https: "False" vpn_ipsec_phase2_interface: state: "present" add-route: "phase1" auto-discovery-forwarder: "phase1" auto-discovery-sender: "phase1" auto-negotiate: "enable" comments: "<your_own_value>" dhcp-ipsec: "enable" dhgrp: "1" dst-addr-type: "subnet" dst-end-ip: "<your_own_value>" dst-end-ip6: "<your_own_value>" dst-name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)" dst-name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)" dst-port: "15" dst-start-ip: "<your_own_value>" dst-start-ip6: "<your_own_value>" dst-subnet: "<your_own_value>" dst-subnet6: "<your_own_value>" encapsulation: "tunnel-mode" keepalive: "enable" keylife-type: "seconds" keylifekbs: "23" keylifeseconds: "24" l2tp: "enable" name: "default_name_26" pfs: "enable" phase1name: "<your_own_value> (source vpn.ipsec.phase1-interface.name)" proposal: "null-md5" protocol: "30" replay: "enable" route-overlap: "use-old" single-source: "enable" src-addr-type: "subnet" src-end-ip: "<your_own_value>" src-end-ip6: "<your_own_value>" src-name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)" src-name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)" src-port: "39" src-start-ip: "<your_own_value>" src-start-ip6: "<your_own_value>" src-subnet: "<your_own_value>" src-subnet6: "<your_own_value>"
host: description: - FortiOS or FortiGate ip address. required: true vdom: default: root description: - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. https: default: true description: - Indicates if the requests towards FortiGate must use HTTPS protocol type: bool password: default: '' description: - FortiOS or FortiGate password. username: description: - FortiOS or FortiGate username. required: true vpn_ipsec_phase2_interface: default: null description: - Configure VPN autokey tunnel. suboptions: add-route: choices: - phase1 - enable - disable description: - Enable/disable automatic route addition. auto-discovery-forwarder: choices: - phase1 - enable - disable description: - Enable/disable forwarding short-cut messages. auto-discovery-sender: choices: - phase1 - enable - disable description: - Enable/disable sending short-cut messages. auto-negotiate: choices: - enable - disable description: - Enable/disable IPsec SA auto-negotiation. comments: description: - Comment. dhcp-ipsec: choices: - enable - disable description: - Enable/disable DHCP-IPsec. dhgrp: choices: - 1 - 2 - 5 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 27 - 28 - 29 - 30 - 31 description: - Phase2 DH group. dst-addr-type: choices: - subnet - range - ip - name - subnet6 - range6 - ip6 - name6 description: - Remote proxy ID type. dst-end-ip: description: - Remote proxy ID IPv4 end. dst-end-ip6: description: - Remote proxy ID IPv6 end. dst-name: description: - Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name. dst-name6: description: - Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name. dst-port: description: - Quick mode destination port (1 - 65535 or 0 for all). dst-start-ip: description: - Remote proxy ID IPv4 start. dst-start-ip6: description: - Remote proxy ID IPv6 start. dst-subnet: description: - Remote proxy ID IPv4 subnet. dst-subnet6: description: - Remote proxy ID IPv6 subnet. encapsulation: choices: - tunnel-mode - transport-mode description: - ESP encapsulation mode. keepalive: choices: - enable - disable description: - Enable/disable keep alive. keylife-type: choices: - seconds - kbs - both description: - Keylife type. keylifekbs: description: - Phase2 key life in number of bytes of traffic (5120 - 4294967295). keylifeseconds: description: - Phase2 key life in time in seconds (120 - 172800). l2tp: choices: - enable - disable description: - Enable/disable L2TP over IPsec. name: description: - IPsec tunnel name. required: true pfs: choices: - enable - disable description: - Enable/disable PFS feature. phase1name: description: - Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1-interface.name. proposal: choices: - null-md5 - null-sha1 - null-sha256 - null-sha384 - null-sha512 - des-null - des-md5 - des-sha1 - des-sha256 - des-sha384 - des-sha512 description: - Phase2 proposal. protocol: description: - Quick mode protocol selector (1 - 255 or 0 for all). replay: choices: - enable - disable description: - Enable/disable replay detection. route-overlap: choices: - use-old - use-new - allow description: - Action for overlapping routes. single-source: choices: - enable - disable description: - Enable/disable single source IP restriction. src-addr-type: choices: - subnet - range - ip - name - subnet6 - range6 - ip6 - name6 description: - Local proxy ID type. src-end-ip: description: - Local proxy ID end. src-end-ip6: description: - Local proxy ID IPv6 end. src-name: description: - Local proxy ID name. Source firewall.address.name firewall.addrgrp.name. src-name6: description: - Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name. src-port: description: - Quick mode source port (1 - 65535 or 0 for all). src-start-ip: description: - Local proxy ID start. src-start-ip6: description: - Local proxy ID IPv6 start. src-subnet: description: - Local proxy ID subnet. src-subnet6: description: - Local proxy ID IPv6 subnet. state: choices: - present - absent description: - Indicates whether to create or remove the object
build: description: Build number of the fortigate image returned: always sample: '1547' type: str http_method: description: Last method used to provision the content into FortiGate returned: always sample: PUT type: str http_status: description: Last result given by FortiGate on last operation applied returned: always sample: '200' type: str mkey: description: Master key (id) used in the last call to FortiGate returned: success sample: id type: str name: description: Name of the table used to fulfill the request returned: always sample: urlfilter type: str path: description: Path of the table used to fulfill the request returned: always sample: webfilter type: str revision: description: Internal revision number returned: always sample: 17.0.2.10658 type: str serial: description: Serial number of the unit returned: always sample: FGVMEVYYQT3AB5352 type: str status: description: Indication of the operation's result returned: always sample: success type: str vdom: description: Virtual domain used returned: always sample: root type: str version: description: Version of the FortiGate returned: always sample: v5.6.3 type: str