ansible / ansible.builtin / v2.9.0 / module / ucs_san_connectivity Configures SAN Connectivity Policies on Cisco UCS Manager | "added in version" 2.5 of ansible.builtin" Authors: David Soper (@dsoper2), CiscoUcs (@CiscoUcs) preview | supported by certifiedansible.builtin.ucs_san_connectivity (v2.9.0) — module
pip
Install with pip install ansible==2.9.0
Configures SAN Connectivity Policies on Cisco UCS Manager.
Examples can be used with the UCS Platform Emulator U(https://communities.cisco.com/ucspe).
- name: Configure SAN Connectivity Policy ucs_san_connectivity: hostname: 172.16.143.150 username: admin password: password name: Cntr-FC-Boot wwnn_pool: WWNN-Pool vhba_list: - name: Fabric-A vhba_template: vHBA-Template-A adapter_policy: Linux - name: Fabric-B vhba_template: vHBA-Template-B adapter_policy: Linux
- name: Remove SAN Connectivity Policy ucs_san_connectivity: hostname: 172.16.143.150 username: admin password: password name: Cntr-FC-Boot state: absent
name: description: - The name of the SAN Connectivity Policy. - This name can be between 1 and 16 alphanumeric characters. - 'You cannot use spaces or any special characters other than - (hyphen), "_" (underscore), : (colon), and . (period).' - You cannot change this name after the policy is created. required: true port: description: - Port number to be used during connection (by default uses 443 for https and 80 for http connection). type: int proxy: description: - If use_proxy is no, specfies proxy to be used for connection. e.g. 'http://proxy.xy.z:8080' type: str state: choices: - present - absent default: present description: - If C(present), will verify SAN Connectivity Policies are present and will create if needed. - If C(absent), will verify SAN Connectivity Policies are absent and will delete if needed. org_dn: default: org-root description: - Org dn (distinguished name) use_ssl: default: true description: - If C(no), an HTTP connection will be used instead of the default HTTPS connection. type: bool hostname: description: - IP address or hostname of Cisco UCS Manager. - Modules can be used with the UCS Platform Emulator U(https://cs.co/ucspe) required: true type: str password: description: - Password for Cisco UCS Manager authentication. required: true type: str username: default: admin description: - Username for Cisco UCS Manager authentication. type: str use_proxy: default: true description: - If C(no), will not use the proxy as defined by system environment variable. type: bool vhba_list: description: - List of vHBAs used by the SAN Connectivity Policy. - vHBAs used by the SAN Connectivity Policy must be created from a vHBA template. - 'Each list element has the following suboptions:' - = name - ' The name of the virtual HBA (required).' - = vhba_template - ' The name of the virtual HBA template (required).' - '- adapter_policy' - ' The name of the Fibre Channel adapter policy.' - ' A user defined policy can be used, or one of the system defined policies (default, Linux, Solaris, VMware, Windows, WindowsBoot)' - ' [Default: default]' - '- order' - ' String specifying the vHBA assignment order (e.g., ''1'', ''2'').' - ' [Default: unspecified]' wwnn_pool: default: default description: - Name of the WWNN pool to use for WWNN assignment. description: aliases: - descr description: - A description of the policy. - Cisco recommends including information about where and when to use the policy. - Enter up to 256 characters. - 'You can use any characters or spaces except the following:' - '` (accent mark), (backslash), ^ (carat), " (double quote), = (equal sign), > (greater than), < (less than), or '' (single quote).'