Try SpotterRemoved in 2.13
Reason:Updated modules released with more functionality | Alternative:Use M(junos_interfaces) instead.
Manage Interface on Juniper JUNOS network devices
| "added in version" 2.4 of ansible.builtin"
Authors: Ganesh Nalawade (@ganeshrn)
deprecated | supported by network
pipInstall with pip install ansible==2.9.21
This module provides declarative management of Interfaces on Juniper JUNOS network devices.
- name: configure interface
junos_interface:
name: ge-0/0/1
description: test-interface
- name: remove interface
junos_interface:
name: ge-0/0/1
state: absent
- name: make interface down
junos_interface:
name: ge-0/0/1
enabled: False
- name: make interface up
junos_interface:
name: ge-0/0/1
enabled: True
- name: Deactivate interface config
junos_interface:
name: ge-0/0/1
state: present
active: False
- name: Activate interface config
net_interface:
name: ge-0/0/1
state: present
active: True
- name: Configure interface speed, mtu, duplex
junos_interface:
name: ge-0/0/1
state: present
speed: 1g
mtu: 256
duplex: full
- name: Create interface using aggregate
junos_interface:
aggregate:
- name: ge-0/0/1
description: test-interface-1
- name: ge-0/0/2
description: test-interface-2
speed: 1g
duplex: full
mtu: 512
- name: Delete interface using aggregate
junos_interface:
aggregate:
- name: ge-0/0/1
- name: ge-0/0/2
state: absent
- name: Check intent arguments
junos_interface:
name: "{{ name }}"
state: up
tx_rate: ge(0)
rx_rate: le(0)
- name: Check neighbor intent
junos_interface:
name: xe-0/1/1
neighbors:
- port: Ethernet1/0/1
host: netdev
- name: Config + intent
junos_interface:
name: "{{ name }}"
enabled: False
state: down
mtu:
description:
- Maximum size of transmit packet.
name:
description:
- Name of the Interface.
required: true
delay:
default: 10
description:
- Time in seconds to wait before checking for the operational state on remote device.
This wait is applicable for operational state argument which are I(state) with values
C(up)/C(down), I(tx_rate) and I(rx_rate).
speed:
description:
- Interface link speed.
state:
choices:
- present
- absent
- up
- down
default: present
description:
- State of the Interface configuration, C(up) indicates present and operationally
up and C(down) indicates present and operationally C(down)
active:
default: true
description:
- Specifies whether or not the configuration is active or deactivated
type: bool
duplex:
choices:
- full
- half
- auto
default: auto
description:
- Interface link status.
enabled:
description:
- Configure interface link status.
type: bool
rx_rate:
description:
- Receiver rate in bits per second (bps).
- This is state check parameter only.
- Supports conditionals, see L(Conditionals in Networking Modules,../network/user_guide/network_working_with_command_output.html)
tx_rate:
description:
- Transmit rate in bits per second (bps).
- This is state check parameter only.
- Supports conditionals, see L(Conditionals in Networking Modules,../network/user_guide/network_working_with_command_output.html)
provider:
description:
- B(Deprecated)
- 'Starting with Ansible 2.5 we recommend using C(connection: network_cli) or C(connection:
netconf).'
- For more information please see the L(Junos OS Platform Options guide, ../network/user_guide/platform_junos.html).
- HORIZONTALLINE
- A dict object containing connection details.
suboptions:
host:
description:
- Specifies the DNS host name or address for connecting to the remote device over
the specified transport. The value of host is used as the destination address
for the transport.
type: str
password:
description:
- Specifies the password to use to authenticate the connection to the remote device. This
value is used to authenticate the SSH session. If the value is not specified
in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will
be used instead.
type: str
port:
description:
- Specifies the port to use when building the connection to the remote device. The
port value will default to the well known SSH port of 22 (for C(transport=cli))
or port 830 (for C(transport=netconf)) device.
type: int
ssh_keyfile:
description:
- Specifies the SSH key to use to authenticate the connection to the remote device. This
value is the path to the key used to authenticate the SSH session. If the value
is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE)
will be used instead.
type: path
timeout:
description:
- Specifies the timeout in seconds for communicating with the network device for
either connecting or sending commands. If the timeout is exceeded before the
operation is completed, the module will error.
type: int
transport:
choices:
- cli
- netconf
default: netconf
description:
- Configures the transport connection to use when connecting to the remote device.
type: str
username:
description:
- Configures the username to use to authenticate the connection to the remote
device. This value is used to authenticate the SSH session. If the value is
not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME)
will be used instead.
type: str
type: dict
aggregate:
description: List of Interfaces definitions.
neighbors:
description:
- Check the operational state of given interface C(name) for LLDP neighbor.
- The following suboptions are available.
suboptions:
host:
description:
- LLDP neighbor host for given interface C(name).
port:
description:
- LLDP neighbor port to which given interface C(name) is connected.
description:
description:
- Description of Interface.
diff.prepared:
description: Configuration difference before and after applying change.
returned: when configuration is changed and diff option is enabled.
sample: '[edit interfaces] + ge-0/0/1 { + description test-interface; + }
'
type: str