ansible / ansible.builtin / v2.9.24 / module / icx_ping Tests reachability using ping from Ruckus ICX 7000 series switches | "added in version" 2.9 of ansible.builtin" Authors: Ruckus Wireless (@Commscope) preview | supported by communityansible.builtin.icx_ping (v2.9.24) — module
pip
Install with pip install ansible==2.9.24
Tests reachability using ping from switch to a remote destination.
- name: Test reachability to 10.10.10.10 icx_ping: dest: 10.10.10.10
- name: Test reachability to ipv6 address from source with timeout icx_ping: dest: ipv6 2001:cdba:0000:0000:0000:0000:3257:9652 source: 10.1.1.1 timeout: 100000
- name: Test reachability to 10.1.1.1 through vrf using 5 packets icx_ping: dest: 10.1.1.1 vrf: x.x.x.x count: 5
- name: Test unreachability to 10.30.30.30 icx_ping: dest: 10.40.40.40 state: absent
- name: Test reachability to ipv4 with ttl and packet size icx_ping: dest: 10.10.10.10 ttl: 20 size: 500
ttl: description: - Specifies the time to live as a maximum number of hops. The value can range from 1 to 255. The default is 64. type: int vrf: description: - Specifies the Virtual Routing and Forwarding (VRF) instance of the device to be pinged. type: str dest: description: - ip-addr | host-name | vrf vrf-name | ipv6 [ ipv6-addr | host-name | vrf vrf-name] (resolvable by switch) of the remote node. required: true type: str size: description: - Specifies the size of the ICMP data portion of the packet, in bytes. This is the payload and does not include the header. The value can range from 0 to 10000. The default is 16.. type: int count: description: - Number of packets to send. Default is 1. type: int state: choices: - absent - present default: present description: - Determines if the expected result is success or fail. type: str source: description: - IP address to be used as the origin of the ping packets. type: str timeout: description: - Specifies the time, in milliseconds for which the device waits for a reply from the pinged device. The value can range from 1 to 4294967296. The default is 5000 (5 seconds). type: int
commands: description: Show the command sent. returned: always sample: - ping 10.40.40.40 count 20 source loopback0 - ping 10.40.40.40 type: list packet_loss: description: Percentage of packets lost. returned: always sample: 0% type: str packets_rx: description: Packets successfully received. returned: always sample: 20 type: int packets_tx: description: Packets successfully transmitted. returned: always sample: 20 type: int rtt: description: Show RTT stats. returned: always sample: avg: 2 max: 8 min: 1 type: dict