ansible / ansible.builtin / v2.9.27 / module / _pn_vlag
Removed in 2.12
Reason:Doesn't support latest Pluribus Networks netvisor | Alternative:Latest modules will be pushed in Ansible future versions.
CLI command to create/delete/modify vlag.
| "added in version" 2.2 of ansible.builtin"
Authors: Pluribus Networks (@amitsi)
deprecated | supported by community
pip
Install with pip install ansible==2.9.27
Execute vlag-create/vlag-delete/vlag-modify command.
A virtual link aggregation group (VLAG) allows links that are physically connected to two different Pluribus Networks devices to appear as a single trunk to a third device. The third device can be a switch, server, or any Ethernet device. A VLAG can provide Layer 2 multipathing, which allows you to create redundancy by increasing bandwidth, enabling multiple parallel paths between nodes and loadbalancing traffic where alternative paths exist.
- name: create a VLAG pn_vlag: state: 'present' pn_name: spine-to-leaf pn_port: 'spine01-to-leaf' pn_peer_port: 'spine02-to-leaf' pn_peer_switch: spine02 pn_mode: 'active-active'
- name: delete VLAGs pn_vlag: state: 'absent' pn_name: spine-to-leaf
state: choices: - present - absent - update description: - State the action to perform. Use 'present' to create vlag, 'absent' to delete vlag and 'update' to modify vlag. required: true pn_mode: choices: - active-active - active-standby description: - Specify the mode for the VLAG. Active-standby indicates one side is active and the other side is in standby mode. Active-active indicates that both sides of the vlag are up by default. pn_name: description: - The C(pn_name) takes a valid name for vlag configuration. required: true pn_port: description: - Specify the local VLAG port. - Required for vlag-create. pn_cliswitch: default: local description: - Target switch(es) to run this command on. pn_lacp_mode: choices: - 'off' - passive - active description: - Specify the LACP mode. pn_peer_port: description: - Specify the peer VLAG port. - Required for vlag-create. pn_clipassword: description: - Provide login password if user is not root. required: false pn_cliusername: description: - Provide login username if user is not root. required: false pn_peer_switch: description: - Specify the fabric-name of the peer switch. pn_lacp_timeout: choices: - slow - fast description: - Specify the LACP timeout as slow(30 seconds) or fast(4 seconds). pn_lacp_fallback: choices: - bundle - individual description: - Specify the LACP fallback mode as bundles or individual. pn_failover_action: choices: - move - ignore description: - Specify the failover action as move or ignore. pn_lacp_fallback_timeout: description: - Specify the LACP fallback timeout in seconds. The range is between 30 and 60 seconds with a default value of 50 seconds.
changed: description: Indicates whether the CLI caused changes on the target. returned: always type: bool command: description: The CLI command run on the target node(s). returned: always type: str stderr: description: The set of error responses from the vlag command. returned: on error type: list stdout: description: The set of responses from the vlag command. returned: always type: list