ansible / ansible.builtin / v2.9.27 / module / ce_ip_interface Manages L3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches. | "added in version" 2.4 of ansible.builtin" Authors: QijunPan (@QijunPan) preview | supported by communityansible.builtin.ce_ip_interface (v2.9.27) — module
pip
Install with pip install ansible==2.9.27
Manages Layer 3 attributes for IPv4 and IPv6 interfaces on HUAWEI CloudEngine switches.
- name: ip_interface module test hosts: cloudengine connection: local gather_facts: no vars: cli: host: "{{ inventory_hostname }}" port: "{{ ansible_ssh_port }}" username: "{{ username }}" password: "{{ password }}" transport: cli tasks: - name: Ensure ipv4 address is configured on 10GE1/0/22 ce_ip_interface: interface: 10GE1/0/22 version: v4 state: present addr: 20.20.20.20 mask: 24 provider: '{{ cli }}' - name: Ensure ipv4 secondary address is configured on 10GE1/0/22 ce_ip_interface: interface: 10GE1/0/22 version: v4 state: present addr: 30.30.30.30 mask: 24 ipv4_type: sub provider: '{{ cli }}' - name: Ensure ipv6 is enabled on 10GE1/0/22 ce_ip_interface: interface: 10GE1/0/22 version: v6 state: present provider: '{{ cli }}' - name: Ensure ipv6 address is configured on 10GE1/0/22 ce_ip_interface: interface: 10GE1/0/22 version: v6 state: present addr: 2001::db8:800:200c:cccb mask: 64 provider: '{{ cli }}'
addr: description: - IPv4 or IPv6 Address. mask: description: - Subnet mask for IPv4 or IPv6 Address in decimal format. state: choices: - present - absent default: present description: - Specify desired state of the resource. version: choices: - v4 - v6 default: v4 description: - IP address version. interface: description: - Full name of interface, i.e. 40GE1/0/22, vlanif10. required: true ipv4_type: choices: - main - sub default: main description: - Specifies an address type. The value is an enumerated type. main, primary IP address. sub, secondary IP address.
changed: description: check to see if a change was made on the device returned: always sample: true type: bool end_state: description: k/v pairs of IP attributes after module execution returned: always sample: interface: 10GE1/0/22 ipv4: - addrType: main ifIpAddr: 20.20.20.20 subnetMask: 255.255.255.0 type: dict existing: description: k/v pairs of existing IP attributes on the interface returned: always sample: interface: 10GE1/0/22 ipv4: - addrType: main ifIpAddr: 11.11.11.11 subnetMask: 255.255.0.0 type: dict proposed: description: k/v pairs of parameters passed into module returned: always sample: addr: 20.20.20.20 interface: 10GE1/0/22 mask: '24' type: dict updates: description: commands sent to the device returned: always sample: - interface 10GE1/0/22 - ip address 20.20.20.20 24 type: list