ansible / ansible.builtin / v2.9.3 / module / enos_config Manage Lenovo ENOS configuration sections | "added in version" 2.5 of ansible.builtin" Authors: Anil Kumar Muraleedharan (@amuraleedhar) preview | supported by communityansible.builtin.enos_config (v2.9.3) — module
pip
Install with pip install ansible==2.9.3
Lenovo ENOS configurations use a simple block indent file syntax for segmenting configuration into sections. This module provides an implementation for working with ENOS configuration sections in a deterministic way.
- name: configure top level configuration enos_config: "lines: hostname {{ inventory_hostname }}"
- name: configure interface settings enos_config: lines: - enable - ip ospf enable parents: interface ip 13
- name: load a config from disk and replace the current config enos_config: src: config.cfg backup: yes
- name: configurable backup path enos_config: src: config.cfg backup: yes backup_options: filename: backup.cfg dir_path: /home/user
src: description: - Specifies the source path to the file that contains the configuration or configuration template to load. The path to the source file can either be the full path on the Ansible control host or a relative path from the playbook or role root directory. This argument is mutually exclusive with I(lines), I(parents). admin: default: 'no' description: - Enters into administration configuration mode for making config changes to the device. type: bool after: description: - The ordered set of commands to append to the end of the command stack if a change needs to be made. Just like with I(before) this allows the playbook designer to append a set of commands to be executed after the command set. lines: aliases: - commands description: - The ordered set of commands that should be configured in the section. The commands must be the exact same commands as found in the device running-config. Be sure to note the configuration command syntax as some commands are automatically modified by the device config parser. match: choices: - line - strict - exact - none default: line description: - Instructs the module on the way to perform the matching of the set of commands against the current device config. If match is set to I(line), commands are matched line by line. If match is set to I(strict), command lines are matched with respect to position. If match is set to I(exact), command lines must be an equal match. Finally, if match is set to I(none), the module will not attempt to compare the source configuration with the running configuration on the remote device. backup: default: 'no' description: - This argument will cause the module to create a full backup of the current C(running-config) from the remote device before any changes are made. If the C(backup_options) value is not given, the backup file is written to the C(backup) folder in the playbook root directory. If the directory does not exist, it is created. type: bool before: description: - The ordered set of commands to push on to the command stack if a change needs to be made. This allows the playbook designer the opportunity to perform configuration commands prior to pushing any changes without affecting how the set of commands are matched against the system. config: description: - The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The I(config) argument allows the implementer to pass in the configuration to use as the base config for comparison. comment: default: configured by enos_config description: - Allows a commit description to be specified to be included when the configuration is committed. If the configuration is not changed or committed, this argument is ignored. parents: description: - The ordered set of parents that uniquely identify the section the commands should be checked against. If the parents argument is omitted, the commands are checked against the set of top level or global commands. replace: choices: - line - block - config default: line description: - Instructs the module on the way to perform the configuration on the device. If the replace argument is set to I(line) then the modified lines are pushed to the device in configuration mode. If the replace argument is set to I(block) then the entire command block is pushed to the device in configuration mode if any line is not correct. provider: description: - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. type: str authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. required: true type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: default: 22 description: - Specifies the port to use when building the connection to the remote device. type: int ssh_keyfile: description: - Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: path timeout: default: 10 description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. type: int username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str type: dict auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool backup_options: description: - This is a dict object containing configurable options related to backup file path. The value of this option is read only when C(backup) is set to I(yes), if C(backup) is set to I(no) this option will be silently ignored. suboptions: dir_path: description: - This option provides the path ending with directory name in which the backup configuration file will be stored. If the directory does not exist it will be first created and the filename is either the value of C(filename) or default filename as described in C(filename) options description. If the path value is not given in that case a I(backup) directory will be created in the current working directory and backup configuration will be copied in C(filename) within I(backup) directory. type: path filename: description: - The filename to be used to store the backup configuration. If the the filename is not given it will be generated based on the hostname, current time and date in format defined by <hostname>_config.<current-date>@<current-time> type: dict version_added: '2.8' version_added_collection: ansible.builtin
backup_path: description: The full path to the backup file returned: when backup is yes sample: /playbooks/ansible/backup/enos01.2016-07-16@22:28:34 type: str updates: description: The set of commands that will be pushed to the remote device returned: Only when lines is specified. sample: - '...' - '...' type: list