ansible / ansible.builtin / v2.9.3 / module / nxos_vxlan_vtep_vni Creates a Virtual Network Identifier member (VNI) | "added in version" 2.2 of ansible.builtin" Authors: Gabriele Gerbino (@GGabriele) preview | supported by networkansible.builtin.nxos_vxlan_vtep_vni (v2.9.3) — module
pip
Install with pip install ansible==2.9.3
Creates a Virtual Network Identifier member (VNI) for an NVE overlay interface.
- nxos_vxlan_vtep_vni: interface: nve1 vni: 6000 ingress_replication: default
vni: description: - ID of the Virtual Network Identifier. required: true state: choices: - present - absent default: present description: - Determines whether the config should be present or not on the device. provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).' - This option is only required if you are using NX-API. - For more information please see the L(NXOS Platform Options guide, ../network/user_guide/platform_nxos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. type: str version_added: 2.5.3 version_added_collection: cisco.nxos authorize: default: false description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool version_added: 2.5.3 version_added_collection: cisco.nxos host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. required: true type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either I(cli) or I(nxapi) transports. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: default: 0 (use common port) description: - Specifies the port to use when building the connection to the remote device. This value applies to either I(cli) or I(nxapi). The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443). type: int ssh_keyfile: description: - Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the I(cli) transport. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: str timeout: default: 10 description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc). type: int version_added: '2.3' version_added_collection: cisco.nxos transport: choices: - cli - nxapi default: cli description: - Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. required: true type: str use_proxy: default: true description: - If C(no), the environment variables C(http_proxy) and C(https_proxy) will be ignored. type: bool version_added: '2.5' version_added_collection: cisco.nxos use_ssl: default: false description: - Configures the I(transport) to use SSL if set to C(yes) only when the C(transport=nxapi), otherwise this value is ignored. type: bool username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str validate_certs: default: true description: - If C(no), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. type: bool type: dict assoc_vrf: description: - This attribute is used to identify and separate processing VNIs that are associated with a VRF and used for routing. The VRF and VNI specified with this command must match the configuration of the VNI under the VRF. type: bool interface: description: - Interface name for the VXLAN Network Virtualization Endpoint. required: true peer_list: description: - Set the ingress-replication static peer list. Valid values are an array, a space-separated string of ip addresses, or the keyword 'default'. suppress_arp: description: - Suppress arp under layer 2 VNI. type: bool multicast_group: description: - The multicast group (range) of the VNI. Valid values are string and keyword 'default'. ingress_replication: choices: - bgp - static - default description: - Specifies mechanism for host reachability advertisement. suppress_arp_disable: description: - Overrides the global ARP suppression config. This is available on NX-OS 9K series running 9.2.x or higher. type: bool version_added: '2.8' version_added_collection: ansible.builtin
commands: description: commands sent to the device returned: always sample: - interface nve1 - member vni 6000 type: list