ansible / ansible.builtin / v2.9.4 / module / junos_vrf Manage the VRF definitions on Juniper JUNOS devices | "added in version" 2.4 of ansible.builtin" Authors: Ganesh Nalawade (@ganeshrn) preview | supported by networkansible.builtin.junos_vrf (v2.9.4) — module
pip
Install with pip install ansible==2.9.4
This module provides declarative management of VRF definitions on Juniper JUNOS devices. It allows playbooks to manage individual or the entire VRF collection.
- name: Configure vrf configuration junos_vrf: name: test-1 description: test-vrf-1 interfaces: - ge-0/0/3 - ge-0/0/2 rd: 192.0.2.1:10 target: target:65514:113 state: present
- name: Remove vrf configuration junos_vrf: name: test-1 description: test-vrf-1 interfaces: - ge-0/0/3 - ge-0/0/2 rd: 192.0.2.1:10 target: target:65514:113 state: absent
- name: Deactivate vrf configuration junos_vrf: name: test-1 description: test-vrf-1 interfaces: - ge-0/0/3 - ge-0/0/2 rd: 192.0.2.1:10 target: target:65514:113 active: False
- name: Activate vrf configuration junos_vrf: name: test-1 description: test-vrf-1 interfaces: - ge-0/0/3 - ge-0/0/2 rd: 192.0.2.1:10 target: target:65514:113 active: True
- name: Create vrf using aggregate junos_vrf: aggregate: - name: test-1 description: test-vrf-1 interfaces: - ge-0/0/3 - ge-0/0/2 rd: 192.0.2.1:10 target: target:65514:113 - name: test-2 description: test-vrf-2 interfaces: - ge-0/0/4 - ge-0/0/5 rd: 192.0.2.2:10 target: target:65515:114 state: present
rd: description: - The router-distinguisher value uniquely identifies the VRF to routing processes on the remote IOS system. The RD value takes the form of C(A:B) where C(A) and C(B) are both numeric values. name: description: - The name of the VRF definition to be managed on the remote IOS device. The VRF definition name is an ASCII string name used to uniquely identify the VRF. This argument is mutually exclusive with the C(aggregate) argument state: choices: - present - absent default: present description: - Configures the state of the VRF definition as it relates to the device operational configuration. When set to I(present), the VRF should be configured in the device active configuration and when set to I(absent) the VRF should not be in the device active configuration active: default: true description: - Specifies whether or not the configuration is active or deactivated type: bool target: description: - It configures VRF target community configuration. The target value takes the form of C(target:A:B) where C(A) and C(B) are both numeric values. provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli) or C(connection: netconf).' - For more information please see the L(Junos OS Platform Options guide, ../network/user_guide/platform_junos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str port: description: - Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for C(transport=cli)) or port 830 (for C(transport=netconf)) device. type: int ssh_keyfile: description: - Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. type: path timeout: description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. type: int transport: choices: - cli - netconf default: netconf description: - Configures the transport connection to use when connecting to the remote device. type: str username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str type: dict aggregate: description: - The set of VRF definition objects to be configured on the remote JUNOS device. Ths list entries can either be the VRF name or a hash of VRF definitions and attributes. This argument is mutually exclusive with the C(name) argument. interfaces: description: - Identifies the set of interfaces that should be configured in the VRF. Interfaces must be routed interfaces in order to be placed into a VRF. description: description: - Provides a short description of the VRF definition in the current active configuration. The VRF definition value accepts alphanumeric characters used to provide additional information about the VRF. table_label: description: - Causes JUNOS to allocate a VPN label per VRF rather than per VPN FEC. This allows for forwarding of traffic to directly connected subnets, COS Egress filtering etc. type: bool
diff.prepared: description: Configuration difference before and after applying change. returned: when configuration is changed and diff option is enabled. sample: '[edit routing-instances] + test-1 { + description test-vrf-1; + instance-type vrf; + interface ge-0/0/2.0; + interface ge-0/0/3.0; + route-distinguisher 192.0.2.1:10; + vrf-target target:65514:113; + } ' type: str