Try SpotterLACP interfaces resource module
| "added in version" 1.0.0 of barrets2002.smb"
Authors: Sumit Jaiswal (@justjais)
Install with ansible-galaxy collection install barrets2002.smb:==0.0.1
collections:
- name: barrets2002.smb
version: 0.0.1This module provides declarative management of LACP on Cisco SMB network devices lacp_interfaces.
# Using merged
#
# Before state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
- name: Merge provided configuration with device configuration
cisco.smb.smb_lacp_interfaces:
config:
- name: GigabitEthernet0/1
port_priority: 10
- name: GigabitEthernet0/2
port_priority: 20
- name: GigabitEthernet0/3
port_priority: 30
- name: Port-channel10
fast_switchover: true
max_bundle: 5
state: merged
# After state:
# ------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
# Using overridden
#
# Before state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
- name: Override device configuration of all lacp_interfaces with provided configuration
cisco.smb.smb_lacp_interfaces:
config:
- name: GigabitEthernet0/1
port_priority: 20
- name: Port-channel10
max_bundle: 2
state: overridden
# After state:
# ------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
# Using replaced
#
# Before state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp max-bundle 5
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
- name: Replaces device configuration of listed lacp_interfaces with provided configuration
cisco.smb.smb_lacp_interfaces:
config:
- name: GigabitEthernet0/3
port_priority: 40
- name: Port-channel10
fast_switchover: true
max_bundle: 2
state: replaced
# After state:
# ------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# lacp max-bundle 2
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 40
# Using Deleted
#
# Before state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# flowcontrol receive on
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
- name: "Delete LACP attributes of given interfaces (Note: This won't delete the interface itself)"
cisco.smb.smb_lacp_interfaces:
config:
- name: GigabitEthernet0/1
state: deleted
# After state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
# Using Deleted without any config passed
# "(NOTE: This will delete all of configured LLDP module attributes)"
#
# Before state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# interface Port-channel20
# lacp max-bundle 2
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# lacp port-priority 10
# interface GigabitEthernet0/2
# shutdown
# lacp port-priority 20
# interface GigabitEthernet0/3
# shutdown
# lacp port-priority 30
- name: "Delete LACP attributes for all configured interfaces (Note: This won't delete the interface itself)"
cisco.smb.smb_lacp_interfaces:
state: deleted
# After state:
# -------------
#
# vsmb#show running-config | section ^interface
# interface Port-channel10
# interface Port-channel20
# interface Port-channel30
# interface GigabitEthernet0/1
# shutdown
# interface GigabitEthernet0/2
# shutdown
# interface GigabitEthernet0/3
# shutdown
# Using Gathered
# Before state:
# -------------
#
# vsmb#sh running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# lacp max-bundle 2
# interface Port-channel40
# lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# lacp port-priority 30
# interface GigabitEthernet0/2
# lacp port-priority 20
- name: Gather listed LACP interfaces with provided configurations
cisco.smb.smb_lacp_interfaces:
config:
state: gathered
# Module Execution Result:
# ------------------------
#
# "gathered": [
# {
# "fast_switchover": true,
# "max_bundle": 2,
# "name": "Port-channel10"
# },
# {
# "max_bundle": 5,
# "name": "Port-channel40"
# },
# {
# "name": "GigabitEthernet0/0"
# },
# {
# "name": "GigabitEthernet0/1",
# "port_priority": 30
# },
# {
# "name": "GigabitEthernet0/2",
# "port_priority": 20
# }
# ]
# After state:
# ------------
#
# vsmb#sh running-config | section ^interface
# interface Port-channel10
# lacp fast-switchover
# lacp max-bundle 2
# interface Port-channel40
# lacp max-bundle 5
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# lacp port-priority 30
# interface GigabitEthernet0/2
# lacp port-priority 20
# Using Rendered
- name: Render the commands for provided configuration
cisco.smb.smb_lacp_interfaces:
config:
- name: GigabitEthernet0/1
port_priority: 10
- name: GigabitEthernet0/2
port_priority: 20
- name: Port-channel10
fast_switchover: true
max_bundle: 2
state: rendered
# Module Execution Result:
# ------------------------
#
# "rendered": [
# "interface GigabitEthernet0/1",
# "lacp port-priority 10",
# "interface GigabitEthernet0/2",
# "lacp port-priority 20",
# "interface Port-channel10",
# "lacp max-bundle 2",
# "lacp fast-switchover"
# ]
# Using Parsed
# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/1
# lacp port-priority 10
# interface GigabitEthernet0/2
# lacp port-priority 20
# interface Port-channel10
# lacp max-bundle 2 fast-switchover
- name: Parse the commands for provided configuration
cisco.smb.smb_lacp_interfaces:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
state:
choices:
- merged
- replaced
- overridden
- deleted
- rendered
- gathered
- parsed
default: merged
description:
- The state the configuration should be left in
- The states I(rendered), I(gathered) and I(parsed) does not perform any change on
the device.
- The state I(rendered) will transform the configuration in C(config) option to platform
specific CLI commands which will be returned in the I(rendered) key within the result.
For state I(rendered) active connection to remote host is not required.
- The state I(gathered) will fetch the running configuration from device and transform
it into structured data in the format as per the resource module argspec and the
value is returned in the I(gathered) key within the result.
- The state I(parsed) reads the configuration from C(running_config) option and transforms
it into JSON format as per the resource module parameters and the value is returned
in the I(parsed) key within the result. The value of C(running_config) option should
be the same format as the output of command I(show running-config | include ip route|ipv6
route) executed on device. For state I(parsed) active connection to remote host
is not required.
type: str
config:
description: A dictionary of LACP lacp_interfaces option
elements: dict
suboptions:
fast_switchover:
description:
- LACP fast switchover supported on this port channel.
type: bool
max_bundle:
description:
- LACP maximum number of ports to bundle in this port channel.
- Refer to vendor documentation for valid port values.
type: int
name:
description:
- Name of the Interface for configuring LACP.
required: true
type: str
port_priority:
description:
- LACP priority on this interface.
- Refer to vendor documentation for valid port values.
type: int
type: list
running_config:
description:
- This option is used only with state I(parsed).
- The value of this option should be the output received from the SMB device by executing
the command B(show running-config | section ^interface).
- The state I(parsed) reads the configuration from C(running_config) option and transforms
it into Ansible structured data as per the resource module's argspec and the value
is then returned in the I(parsed) key within the result.
type: str
after:
description: The configuration as structured data after module completion.
returned: when changed
sample: "The configuration returned will always be in the same format\n of the parameters\
\ above.\n"
type: list
before:
description: The configuration as structured data prior to module invocation.
returned: always
sample: "The configuration returned will always be in the same format\n of the parameters\
\ above.\n"
type: list
commands:
description: The set of commands pushed to the remote device.
returned: always
sample:
- interface GigabitEthernet 0/1
- lacp port-priority 30
type: list