Try SpotterResource module to configure VLANs.
| "added in version" 1.0.0 of cisco.ios"
Authors: Sumit Jaiswal (@justjais), Sagar Paul (@KB-perByte), Padmini Priyadarshini Sivaraj (@PadminiSivaraj)
Install with ansible-galaxy collection install cisco.ios:==8.0.0
collections:
- name: cisco.ios
version: 8.0.0This module provides declarative management of VLANs on Cisco IOS network devices.
# Using merged
# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
- name: Merge provided configuration with device configuration
cisco.ios.ios_vlans:
config:
- name: Vlan_10
vlan_id: 10
state: active
shutdown: disabled
remote_span: true
- name: Vlan_20
vlan_id: 20
mtu: 610
state: active
shutdown: enabled
- name: Vlan_30
vlan_id: 30
state: suspend
shutdown: enabled
state: merged
# After state:
# ------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
# Using merged
# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 201
# member evpn-instance 201 vni 10201
- name: Merge provided configuration with device configuration
cisco.ios.ios_vlans:
config:
- vlan_id: 102
member:
vni: 10102
evi: 102
- vlan_id: 901
member:
vni: 50901
state: merged
# After state:
# ------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 901
# member vni 50901
# Using overridden
# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Override device configuration of all VLANs with provided configuration
cisco.ios.ios_vlans:
config:
- name: Vlan_10
vlan_id: 10
mtu: 1000
state: overridden
# After state:
# ------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 Vlan_10 active
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1000 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
# Using overridden
# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 901
# member vni 50901
- name: Override device configuration of all VLANs with provided configuration
cisco.ios.ios_vlans:
config:
- vlan_id: 101
member:
vni: 10102
evi: 102
- vlan_id: 102
member:
vni: 10101
evi: 101
state: overridden
# After state:
# ------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 102 vni 10102
# vlan configuration 102
# member evpn-instance 101 vni 10101
# Using replaced
# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Replaces device configuration of listed VLANs with provided configuration
cisco.ios.ios_vlans:
config:
- vlan_id: 20
name: Test_VLAN20
mtu: 700
shutdown: disabled
- vlan_id: 50
name: pvlan-isolated
private_vlan:
type: isolated
- vlan_id: 60
name: pvlan-community
private_vlan:
type: community
- vlan_id: 70
name: pvlan-primary
private_vlan:
type: primary
associated:
- 50
- 60
state: replaced
# After state:
# ------------
#
# vios_l2#sh vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/0, Gi0/1, Gi0/2, Gi0/3
# 10 Vlan_10 active
# 20 Test_VLAN20 active
# 50 pvlan-isolated active
# 60 pvlan-community active
# 70 pvlan-primary active
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1000 - - - - - 0 0
# 20 enet 100020 700 - - - - - 0 0
# 50 enet 100050 1500 - - - - - 0 0
# 60 enet 100051 1500 - - - - - 0 0
# 70 enet 100059 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
#
#
# Primary Secondary Type Ports
# ------- --------- ----------------- ------------------------------------------
# 70 50 isolated
# 70 60 community
# Using deleted
# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Delete attributes of given VLANs
cisco.ios.ios_vlans:
config:
- vlan_id: 10
- vlan_id: 20
state: deleted
# After state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
# Using deleted
# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 901
# member vni 50901
- name: Delete attributes of given VLANs
cisco.ios.ios_vlans:
config:
- vlan_id: 101
state: deleted
# After state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 901
# member vni 50901
# Using Deleted without any config passed
# "(NOTE: This will delete all of configured vlans attributes)"
# Before state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Delete attributes of ALL VLANs
cisco.ios.ios_vlans:
state: deleted
# After state:
# -------------
#
# vios_l2#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
# Using Deleted without any config passed
# "(NOTE: This will delete all of configured vlans attributes)"
# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 202
# member evpn-instance 202 vni 10202
# vlan configuration 901
# member vni 50901
- name: Delete attributes of ALL VLANs
cisco.ios.ios_vlans:
state: deleted
# After state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# no vlan configuration 101
# no vlan configuration 102
# no vlan configuration 201
# no vlan configuration 202
# no vlan configuration 901
# no vlan configuration 902
# Using gathered, vlan configuration only
# Before state:
# -------------
#
# Leaf-01#show run nve | sec ^vlan configuration
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 201
# member evpn-instance 201 vni 10201
# vlan configuration 202
# member evpn-instance 202 vni 10202
# vlan configuration 901
# member vni 50901
- name: Gather listed vlans with provided configurations
cisco.ios.ios_vlans:
state: gathered
# Module Execution Result:
# ------------------------
#
# gathered = [
# {
# "member": {
# "evi": 101,
# "vni": 10101
# },
# "vlan_id": 101
# },
# {
# "member": {
# "evi": 102,
# "vni": 10102
# },
# "vlan_id": 102
# },
# {
# "member": {
# "evi": 201,
# "vni": 10201
# },
# "vlan_id": 201
# },
# {
# "member": {
# "evi": 202,
# "vni": 10202
# },
# "vlan_id": 202
# },
# {
# "member": {
# "vni": 50901
# },
# "vlan_id": 901
# },
# {
# "member": {
# "vni": 50902
# },
# "vlan_id": 902
# }
# ]
# Using Rendered
- name: Render the commands for provided configuration
cisco.ios.ios_vlans:
config:
- name: Vlan_10
vlan_id: 10
state: active
shutdown: disabled
remote_span: true
- name: Vlan_20
vlan_id: 20
mtu: 610
state: active
shutdown: enabled
- name: Vlan_30
vlan_id: 30
state: suspend
shutdown: enabled
state: rendered
# Module Execution Result:
# ------------------------
#
# "rendered": [
# "vlan 10",
# "name Vlan_10",
# "state active",
# "remote-span",
# "no shutdown",
# "vlan 20",
# "name Vlan_20",
# "state active",
# "mtu 610",
# "shutdown",
# "vlan 30",
# "name Vlan_30",
# "state suspend",
# "shutdown"
# ]
# Using Rendered
- name: Render the commands for provided configuration
cisco.ios.ios_vlans:
config:
- vlan_id: 101
member:
vni: 10101
evi: 101
- vlan_id: 102
member:
vni: 10102
evi: 102
state: rendered
# Module Execution Result:
# ------------------------
#
# "rendered": [
# "vlan configuration 101",
# "member evpn-instance 101 vni 10101",
# "vlan configuration 102",
# "member evpn-instance 102 vni 10102"
# ]
# Using Parsed
# File: parsed.cfg
# ----------------
#
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 1500 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
- name: Parse the commands for provided configuration
cisco.ios.ios_vlans:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# Module Execution Result:
# ------------------------
#
# "parsed": [
# {
# "mtu": 1500,
# "name": "default",
# "shutdown": "disabled",
# "state": "active",
# "vlan_id": 1
# },
# {
# "mtu": 1500,
# "name": "vlan_10",
# "shutdown": "disabled",
# "state": "active",
# "vlan_id": 10
# },
# {
# "mtu": 1500,
# "name": "vlan_20",
# "shutdown": "enabled",
# "state": "active",
# "vlan_id": 20
# },
# {
# "mtu": 1500,
# "name": "vlan_30",
# "shutdown": "enabled",
# "state": "suspend",
# "vlan_id": 30
# },
# {
# "mtu": 1500,
# "name": "fddi-default",
# "shutdown": "enabled",
# "state": "active",
# "vlan_id": 1002
# },
# {
# "mtu": 1500,
# "name": "token-ring-default",
# "shutdown": "enabled",
# "state": "active",
# "vlan_id": 1003
# },
# {
# "mtu": 1500,
# "name": "fddinet-default",
# "shutdown": "enabled",
# "state": "active",
# "vlan_id": 1004
# },
# {
# "mtu": 1500,
# "name": "trnet-default",
# "shutdown": "enabled",
# "state": "active",
# "vlan_id": 1005
# }
# ]
# Using Parsed Vlan configuration only
# File: parsed.cfg
# ----------------
#
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 901
# member vni 50901
- name: Parse the commands for provided configuration
cisco.ios.ios_vlans:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# Module Execution Result:
# ------------------------
#
# "parsed": [
# {
# "member": {
# "evi": 101,
# "vni": 10101
# },
# "vlan_id": 101
# },
# {
# "member": {
# "evi": 102,
# "vni": 10102
# },
# "vlan_id": 102
# },
# {
# "member": {
# "vni": 50901
# },
# "vlan_id": 901
# }
# ]
# Using Parsed, Vlan and vlan configuration
# File: parsed.cfg
# ----------------
#
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 101 RemoteIsInMyName act/unsup Fa0/1, Fa0/4, Fa0/5, Fa0/6, Fa0/7, Fa0/8, Fa0/9, Fa0/10, Fa0/11, Fa0/12
# Fa0/13, Fa0/14, Fa0/15, Fa0/16, Fa0/17, Fa0/18, Fa0/19, Fa0/20, Fa0/21
# Fa0/22, Fa0/23, Fa0/24, Fa0/25, Fa0/26, Fa0/27, Fa0/28, Fa0/29, Fa0/30
# Fa0/31, Fa0/32, Fa0/33, Fa0/34, Fa0/35, Fa0/36, Fa0/37, Fa0/38, Fa0/39
# Fa0/40, Fa0/41, Fa0/42, Fa0/43, Fa0/44, Fa0/45, Fa0/46, Fa0/47, Fa0/48
# 150 VLAN0150 active
# 888 a_very_long_vlan_name_a_very_long_vlan_name
# active
# 1002 fddi-default act/unsup
# 1003 trcrf-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trbrf-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 101 enet 100101 610 - - - - - 0 0
# 150 enet 100150 1500 - - - - - 0 0
# 888 enet 100888 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 trcrf 101003 4472 1005 3276 - - srb 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trbrf 101005 4472 - - 15 ibm - 0 0
#
#
# VLAN AREHops STEHops Backup CRF
# ---- ------- ------- ----------
# 1003 7 7 off
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 150
#
# Primary Secondary Type Ports
# ------- --------- ----------------- ------------------------------------------
#
# vlan configuration 101
# member evpn-instance 101 vni 10101
# vlan configuration 102
# member evpn-instance 102 vni 10102
# vlan configuration 901
# member vni 50901
- name: Parse the commands for provided configuration
cisco.ios.ios_vlans:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
state:
choices:
- merged
- replaced
- overridden
- deleted
- rendered
- gathered
- purged
- parsed
default: merged
description:
- The state the configuration should be left in
- The states I(rendered), I(gathered) and I(parsed) does not perform any change on
the device.
- The state I(rendered) will transform the configuration in C(config) option to platform
specific CLI commands which will be returned in the I(rendered) key within the result.
For state I(rendered) active connection to remote host is not required.
- The state I(gathered) will fetch the running configuration from device and transform
it into structured data in the format as per the resource module argspec and the
value is returned in the I(gathered) key within the result.
- The state I(parsed) reads the configuration from C(running_config) option and transforms
it into JSON format as per the resource module parameters and the value is returned
in the I(parsed) key within the result. The value of C(running_config) option should
be the same format as the output of commands I(show vlan) and I(show running-config
| sec ^vlan configuration .+) executed on device. For state I(parsed) active connection
to remote host is not required.
type: str
config:
description: A dictionary of VLANs options
elements: dict
suboptions:
member:
description:
- Members of VLAN
suboptions:
evi:
description:
- Ethernet Virtual Private Network (EVPN)
type: int
vni:
description:
- VXLAN vni
required: true
type: int
type: dict
mtu:
description:
- VLAN Maximum Transmission Unit.
- Refer to vendor documentation for valid values.
type: int
name:
description:
- Ascii name of the VLAN.
- NOTE, I(name) should not be named/appended with I(default) as it is reserved
for device default vlans.
type: str
private_vlan:
description:
- Options for private vlan configuration.
suboptions:
associated:
description:
- 'List of private VLANs associated with the primary . Only works with `type:
primary`.'
elements: int
type: list
type:
choices:
- primary
- isolated
- community
description:
- Private VLAN type
type: str
type: dict
remote_span:
description:
- Configure as Remote SPAN VLAN
type: bool
shutdown:
choices:
- enabled
- disabled
description:
- Shutdown VLAN switching.
type: str
state:
choices:
- active
- suspend
description:
- Operational state of the VLAN
type: str
vlan_id:
description:
- ID of the VLAN. Range 1-4094
required: true
type: int
type: list
running_config:
description:
- This option is used only with state I(parsed).
- The value of this option should be the output received from the IOS device by executing
the command B(show vlan).
- The state I(parsed) reads the configuration from C(running_config) option and transforms
it into Ansible structured data as per the resource module's argspec and the value
is then returned in the I(parsed) key within the result.
type: str
after:
description: The resulting configuration after module execution.
returned: when changed
sample: 'This output will always be in the same format as the module argspec.
'
type: dict
before:
description: The configuration prior to the module execution.
returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or
C(purged)
sample: 'This output will always be in the same format as the module argspec.
'
type: dict
commands:
description: The set of commands pushed to the remote device.
returned: when I(state) is C(merged), C(replaced), C(overridden), C(deleted) or
C(purged)
sample:
- vlan configuration 202
- state active
- remote-span
type: list
gathered:
description: Facts about the network resource gathered from the remote device as
structured data.
returned: when I(state) is C(gathered)
sample: 'This output will always be in the same format as the module argspec.
'
type: list
parsed:
description: The device native config provided in I(running_config) option parsed
into structured data as per module argspec.
returned: when I(state) is C(parsed)
sample: 'This output will always be in the same format as the module argspec.
'
type: list
rendered:
description: The provided configuration in the task rendered in device-native format
(offline).
returned: when I(state) is C(rendered)
sample:
- vlan configuration 202
- member evpn-instance 202 vni 10202
- vlan 200
type: list