community / community.general / 0.1.1 / module / cnos_facts Collect facts from remote devices running Lenovo CNOS Authors: Anil Kumar Muraleedharan (@amuraleedhar) preview | supported by communitycommunity.general.cnos_facts (0.1.1) — module
Install with ansible-galaxy collection install community.general:==0.1.1
collections: - name: community.general version: 0.1.1
Collects a base set of device facts from a remote Lenovo device running on CNOS. This module prepends all of the base network fact keys with C(ansible_net_<fact>). The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.
Tasks: The following are examples of using the module cnos_facts. --- - name: Test cnos Facts cnos_facts:
Tasks: The following are examples of using the module cnos_facts. --- - name: Test cnos Facts cnos_facts: --- # Collect all facts from the device - cnos_facts: gather_subset: all
# Collect only the config and default facts - cnos_facts: gather_subset: - config
# Do not collect hardware facts - cnos_facts: gather_subset: - "!hardware"
auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. authorize: default: 'no' description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool gather_subset: default: '!config' description: - When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial C(M(!)) to specify that a specific subset should not be collected. required: false
ansible_net_all_ipv4_addresses: description: All IPv4 addresses configured on the device returned: when interfaces is configured type: list ansible_net_all_ipv6_addresses: description: All IPv6 addresses configured on the device returned: when interfaces is configured type: list ansible_net_config: description: The current active config from the device returned: when config is configured type: str ansible_net_gather_subset: description: The list of fact subsets collected from the device returned: always type: list ansible_net_hostname: description: The configured hostname of the device returned: always type: str ansible_net_image: description: Indicates the active image for the device returned: always type: str ansible_net_interfaces: description: A hash of all interfaces running on the system. This gives information on description, mac address, mtu, speed, duplex and operstatus returned: when interfaces is configured type: dict ansible_net_memfree_mb: description: The available free memory on the remote device in MB returned: when hardware is configured type: int ansible_net_model: description: The model name returned from the Lenovo CNOS device returned: always type: str ansible_net_neighbors: description: The list of LLDP neighbors from the remote device returned: when interfaces is configured type: dict ansible_net_serialnum: description: The serial number of the Lenovo CNOS device returned: always type: str ansible_net_version: description: The CNOS operating system version running on the remote device returned: always type: str