Try SpotterManage Layer-3 interfaces on Lenovo CNOS network devices.
Authors: Anil Kumar Muraleedharan (@amuraleedhar)
preview | supported by community
Install with ansible-galaxy collection install community.general:==0.1.1
collections:
- name: community.general
version: 0.1.1This module provides declarative management of Layer-3 interfaces on CNOS network devices.
- name: Remove Ethernet1/33 IPv4 and IPv6 address
cnos_l3_interface:
name: Ethernet1/33
state: absent
- name: Set Ethernet1/33 IPv4 address
cnos_l3_interface:
name: Ethernet1/33
ipv4: 10.241.107.1/24
- name: Set Ethernet1/33 IPv6 address
cnos_l3_interface:
name: Ethernet1/33
ipv6: "fd5d:12c9:2201:1::1/64"
- name: Set Ethernet1/33 in dhcp
cnos_l3_interface:
name: Ethernet1/33
ipv4: dhcp
ipv6: dhcp
- name: Set interface Vlan1 (SVI) IPv4 address
cnos_l3_interface:
name: Vlan1
ipv4: 192.168.0.5/24
- name: Set IP addresses on aggregate
cnos_l3_interface:
aggregate:
- { name: Ethernet1/33, ipv4: 10.241.107.1/24 }
- { name: Ethernet1/44, ipv4: 10.240.106.1/24,
ipv6: "fd5d:12c9:2201:1::1/64" }
- name: Remove IP addresses on aggregate
cnos_l3_interface:
aggregate:
- { name: Ethernet1/33, ipv4: 10.241.107.1/24 }
- { name: Ethernet1/44, ipv4: 10.240.106.1/24,
ipv6: "fd5d:12c9:2201:1::1/64" }
state: absent
ipv4:
description:
- IPv4 address to be set for the Layer-3 interface mentioned in I(name) option. The
address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 10.241.107.1/24
ipv6:
description:
- IPv6 address to be set for the Layer-3 interface mentioned in I(name) option. The
address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
name:
description:
- Name of the Layer-3 interface to be configured eg. Ethernet1/2
state:
choices:
- present
- absent
default: present
description:
- State of the Layer-3 interface configuration. It indicates if the configuration
should be present or absent on remote device.
provider:
description:
- B(Deprecated)
- 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).'
- For more information please see the L(CNOS Platform Options guide, ../network/user_guide/platform_cnos.html).
- HORIZONTALLINE
- A dict object containing connection details.
suboptions:
auth_pass:
description:
- Specifies the password to use if required to enter privileged mode on the remote
device. If I(authorize) is false, then this argument does nothing. If the value
is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS)
will be used instead.
authorize:
default: 'no'
description:
- Instructs the module to enter privileged mode on the remote device before sending
any commands. If not specified, the device will attempt to execute all commands
in non-privileged mode. If the value is not specified in the task, the value
of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead.
type: bool
host:
description:
- Specifies the DNS host name or address for connecting to the remote device over
the specified transport. The value of host is used as the destination address
for the transport.
required: true
password:
description:
- Specifies the password to use to authenticate the connection to the remote device. This
value is used to authenticate the SSH session. If the value is not specified
in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will
be used instead.
port:
default: 22
description:
- Specifies the port to use when building the connection to the remote device.
ssh_keyfile:
description:
- Specifies the SSH key to use to authenticate the connection to the remote device. This
value is the path to the key used to authenticate the SSH session. If the value
is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE)will
be used instead.
timeout:
default: 10
description:
- Specifies the timeout in seconds for communicating with the network device for
either connecting or sending commands. If the timeout is exceeded before the
operation is completed, the module will error.
username:
description:
- Configures the username to use to authenticate the connection to the remote
device. This value is used to authenticate the SSH session. If the value is
not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME)
will be used instead.
aggregate:
description:
- List of Layer-3 interfaces definitions. Each of the entry in aggregate list should
define name of interface C(name) and a optional C(ipv4) or C(ipv6) address.
commands:
description: The list of configuration mode commands to send to the device
returned: always, except for the platforms that use Netconf transport to manage
the device.
sample:
- interface Ethernet1/33
- ip address 10.241.107.1 255.255.255.0
- ipv6 address fd5d:12c9:2201:1::1/64
type: list