community / community.general / 0.1.1 / module / cnos_showrun Collect the current running configuration on devices running on CNOS Authors: Anil Kumar Muraleedharan (@amuraleedhar) preview | supported by communitycommunity.general.cnos_showrun (0.1.1) — module
Install with ansible-galaxy collection install community.general:==0.1.1
collections: - name: community.general version: 0.1.1
This module allows you to view the switch running configuration. It executes the display running-config CLI command on a switch and returns a file containing the current running configuration of the target network device. This module uses SSH to manage network device configuration. The results of the operation will be placed in a directory named 'results' that must be created by the user in their local directory to where the playbook is run.
Tasks : The following are examples of using the module cnos_showrun. These are written in the main.yml file of the tasks directory. --- - name: Run show running-config cnos_showrun: deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}" outputfile: "./results/test_showrun_{{ inventory_hostname }}_output.txt"
host: description: - This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured. required: true type: str password: description: - Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used. required: true type: str username: description: - Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used. required: true type: str deviceType: choices: - g8272_cnos - g8296_cnos - g8332_cnos - NE0152T - NE1072T - NE1032 - NE1032T - NE10032 - NE2572 description: - This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032,NE2572 are added since Ansible 2.4. The choice NE0152T is added since 2.8 required: true type: str outputfile: description: - This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission. required: true type: str enablePassword: description: - Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used. type: str
msg: description: Success or failure message returned: always sample: Running Configuration saved in file type: str