community / community.general / 0.1.1 / module / cnos_vlan Manage VLANs on CNOS network devices Authors: Anil Kumar Mureleedharan(@amuraleedhar) preview | supported by communitycommunity.general.cnos_vlan (0.1.1) — module
Install with ansible-galaxy collection install community.general:==0.1.1
collections: - name: community.general version: 0.1.1
This module provides declarative management of VLANs on Lenovo CNOS network devices.
- name: Create vlan cnos_vlan: vlan_id: 100 name: test-vlan state: present
- name: Add interfaces to VLAN cnos_vlan: vlan_id: 100 interfaces: - Ethernet1/33 - Ethernet1/44
- name: Check if interfaces is assigned to VLAN cnos_vlan: vlan_id: 100 associated_interfaces: - Ethernet1/33 - Ethernet1/44
- name: Delete vlan cnos_vlan: vlan_id: 100 state: absent
name: description: - Name of the VLAN. delay: default: 10 description: - Delay the play should wait to check for declarative intent params values. purge: default: false description: - Purge VLANs not defined in the I(aggregate) parameter. type: bool state: choices: - present - absent - active - suspend default: present description: - State of the VLAN configuration. vlan_id: description: - ID of the VLAN. Range 1-4094. required: true provider: description: - B(Deprecated) - 'Starting with Ansible 2.5 we recommend using C(connection: network_cli).' - For more information please see the L(CNOS Platform Options guide, ../network/user_guide/platform_cnos.html). - HORIZONTALLINE - A dict object containing connection details. suboptions: auth_pass: description: - Specifies the password to use if required to enter privileged mode on the remote device. If I(authorize) is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTH_PASS) will be used instead. authorize: default: 'no' description: - Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_AUTHORIZE) will be used instead. type: bool host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. required: true password: description: - Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. port: default: 22 description: - Specifies the port to use when building the connection to the remote device. ssh_keyfile: description: - Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_SSH_KEYFILE) will be used instead. timeout: default: 10 description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. username: description: - Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. aggregate: description: List of VLANs definitions. interfaces: description: - List of interfaces that should be associated to the VLAN. required: true associated_interfaces: description: - This is a intent option and checks the operational state of the for given vlan C(name) for associated interfaces. If the value in the C(associated_interfaces) does not match with the operational state of vlan interfaces on device it will result in failure.
commands: description: The list of configuration mode commands to send to the device returned: always sample: - vlan 100 - name test-vlan type: list