community.general.slxos_l3_interface (0.1.1) — module

Install collection

Install with ansible-galaxy collection install community.general:==0.1.1

Add to requirements.yml

  collections:
    - name: community.general
      version: 0.1.1

Description

This module provides declarative management of L3 interfaces on slxos network devices.

Usage examples

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Remove Ethernet 0/3 IPv4 and IPv6 address
  slxos_l3_interface:
    name: Ethernet 0/3
    state: absent

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Set Ethernet 0/3 IPv4 address
  slxos_l3_interface:
    name: Ethernet 0/3
    ipv4: 192.168.0.1/24

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Set Ethernet 0/3 IPv6 address
  slxos_l3_interface:
    name: Ethernet 0/3
    ipv6: "fd5d:12c9:2201:1::1/64"

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Set IP addresses on aggregate
  slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Remove IP addresses on aggregate
  slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
    state: absent

Inputs

    
ipv4:
    description:
    - IPv4 address to be set for the L3 interface mentioned in I(name) option. The address
      format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24

ipv6:
    description:
    - IPv6 address to be set for the L3 interface mentioned in I(name) option. The address
      format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64

name:
    description:
    - Name of the L3 interface to be configured eg. Ethernet 0/2

state:
    choices:
    - present
    - absent
    default: present
    description:
    - State of the L3 interface configuration. It indicates if the configuration should
      be present or absent on remote device.

aggregate:
    description:
    - List of L3 interfaces definitions. Each of the entry in aggregate list should define
      name of interface C(name) and a optional C(ipv4) or C(ipv6) address.

Outputs

commands:
  description: The list of configuration mode commands to send to the device
  returned: always, except for the platforms that use Netconf transport to manage
    the device.
  sample:
  - interface Ethernet 0/2
  - ip address 192.168.0.1/24
  - ipv6 address fd5d:12c9:2201:1::1/64
  type: list