community / community.general / 1.3.14 / module / nios_member Configure Infoblox NIOS members Authors: Krishna Vasudevan (@krisvasudevan)community.general.nios_member (1.3.14) — module
Install with ansible-galaxy collection install community.general:==1.3.14
collections: - name: community.general version: 1.3.14
Adds and/or removes Infoblox NIOS servers. This module manages NIOS C(member) objects using the Infoblox WAPI interface over REST.
- name: Add a member to the grid with IPv4 address community.general.nios_member: host_name: member01.localdomain vip_setting: - address: 192.168.1.100 subnet_mask: 255.255.255.0 gateway: 192.168.1.1 config_addr_type: IPV4 platform: VNIOS comment: "Created by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local
- name: Add a HA member to the grid community.general.nios_member: host_name: memberha.localdomain vip_setting: - address: 192.168.1.100 subnet_mask: 255.255.255.0 gateway: 192.168.1.1 config_addr_type: IPV4 platform: VNIOS enable_ha: true router_id: 150 node_info: - lan_ha_port_setting: - ha_ip_address: 192.168.1.70 mgmt_lan: 192.168.1.80 - lan_ha_port_setting: - ha_ip_address: 192.168.1.71 mgmt_lan: 192.168.1.81 comment: "Created by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local
- name: Update the member with pre-provisioning details specified community.general.nios_member: name: member01.localdomain pre_provisioning: - hardware_info: - hwmodel: IB-VM-820 hwtype: IB-VNIOS licenses: - dns - dhcp - enterprise - vnios comment: "Updated by Ansible" state: present provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local
- name: Remove the member community.general.nios_member: name: member01.localdomain state: absent provider: host: "{{ inventory_hostname_short }}" username: admin password: admin connection: local
state: choices: - present - absent default: present description: - Configures the intended state of the instance of the object on the NIOS server. When this value is set to C(present), the object is configured on the device and when this value is set to C(absent) the value is removed (if necessary) from the device. comment: description: - A descriptive comment of the Grid member. extattrs: description: - Extensible attributes associated with the object. platform: default: INFOBLOX description: - Configures the Hardware Platform. provider: description: - A dict object containing connection details. suboptions: host: description: - Specifies the DNS host name or address for connecting to the remote instance of NIOS WAPI over REST - Value can also be specified using C(INFOBLOX_HOST) environment variable. type: str http_request_timeout: default: 10 description: - The amount of time before to wait before receiving a response - Value can also be specified using C(INFOBLOX_HTTP_REQUEST_TIMEOUT) environment variable. type: int max_results: default: 1000 description: - Specifies the maximum number of objects to be returned, if set to a negative number the appliance will return an error when the number of returned objects would exceed the setting. - Value can also be specified using C(INFOBLOX_MAX_RESULTS) environment variable. type: int max_retries: default: 3 description: - Configures the number of attempted retries before the connection is declared usable - Value can also be specified using C(INFOBLOX_MAX_RETRIES) environment variable. type: int password: description: - Specifies the password to use to authenticate the connection to the remote instance of NIOS. - Value can also be specified using C(INFOBLOX_PASSWORD) environment variable. type: str username: description: - Configures the username to use to authenticate the connection to the remote instance of NIOS. - Value can also be specified using C(INFOBLOX_USERNAME) environment variable. type: str validate_certs: aliases: - ssl_verify default: false description: - Boolean value to enable or disable verifying SSL certificates - Value can also be specified using C(INFOBLOX_SSL_VERIFY) environment variable. type: bool wapi_version: default: '2.1' description: - Specifies the version of WAPI to use - Value can also be specified using C(INFOBLOX_WAP_VERSION) environment variable. - Until ansible 2.8 the default WAPI was 1.4 type: str type: dict enable_ha: description: - If set to True, the member has two physical nodes (HA pair). type: bool host_name: aliases: - name description: - Specifies the host name of the member to either add or remove from the NIOS instance. required: true node_info: description: - Configures the node information list with detailed status report on the operations of the Grid Member. elements: dict suboptions: lan2_physical_setting: description: - Physical port settings for the LAN2 interface. elements: dict suboptions: auto_port_setting_enabled: description: - Enable or disalbe the auto port setting. type: bool duplex: description: - The port duplex; if speed is 1000, duplex must be FULL. speed: description: - The port speed; if speed is 1000, duplex is FULL. type: list lan_ha_port_setting: description: - LAN/HA port settings for the node. elements: dict suboptions: ha_ip_address: description: - HA IP address. ha_port_setting: description: - Physical port settings for the HA interface. elements: dict suboptions: auto_port_setting_enabled: description: - Enable or disalbe the auto port setting. type: bool duplex: description: - The port duplex; if speed is 1000, duplex must be FULL. speed: description: - The port speed; if speed is 1000, duplex is FULL. type: list lan_port_setting: description: - Physical port settings for the LAN interface. elements: dict suboptions: auto_port_setting_enabled: description: - Enable or disalbe the auto port setting. type: bool duplex: description: - The port duplex; if speed is 1000, duplex must be FULL. speed: description: - The port speed; if speed is 1000, duplex is FULL. type: list mgmt_ipv6addr: description: - Public IPv6 address for the LAN1 interface. mgmt_lan: description: - Public IPv4 address for the LAN1 interface. type: list mgmt_network_setting: description: - Network settings for the MGMT port of the node. elements: dict suboptions: address: description: - The IPv4 Address of MGMT gateway: description: - The default gateway of MGMT subnet_mask: description: - The subnet mask of MGMT type: list v6_mgmt_network_setting: description: - The network settings for the IPv6 MGMT port of the node. elements: dict suboptions: cidr_prefix: description: - The IPv6 CIDR prefix of MGMT gateway: description: - The gateway address of MGMT virtual_ip: description: - The IPv6 Address of MGMT type: list type: list router_id: description: - Virtual router identifier. Provide this ID if "ha_enabled" is set to "true". This is a unique VRID number (from 1 to 255) for the local subnet. vip_setting: description: - Configures the network settings for the grid member. elements: dict suboptions: address: description: - The IPv4 Address of the Grid Member gateway: description: - The default gateway for the Grid Member subnet_mask: description: - The subnet mask for the Grid Member type: list create_token: default: false description: - Flag for initiating a create token request for pre-provisioned members. type: bool ipv6_setting: description: - Configures the IPv6 settings for the grid member. elements: dict suboptions: cidr_prefix: description: - The IPv6 CIDR prefix for the Grid Member gateway: description: - The gateway address for the Grid Member virtual_ip: description: - The IPv6 Address of the Grid Member type: list lan2_enabled: description: - When set to "true", the LAN2 port is enabled as an independent port or as a port for failover purposes. type: bool upgrade_group: default: Default description: - The name of the upgrade group to which this Grid member belongs. syslog_servers: description: - The list of external syslog servers. elements: dict suboptions: address: description: - The server address. category_list: description: - The list of all syslog logging categories. connection_type: default: UDP description: - The connection type for communicating with this server.(STCP/TCP?UDP) local_interface: default: ANY description: - The local interface through which the appliance sends syslog messages to the syslog server.(ANY/LAN/MGMT) message_node_id: default: LAN description: - Identify the node in the syslog message. (HOSTNAME/IP_HOSTNAME/LAN/MGMT) message_source: default: ANY description: - The source of syslog messages to be sent to the external syslog server. only_category_list: description: - The list of selected syslog logging categories. The appliance forwards syslog messages that belong to the selected categories. type: bool port: default: 514 description: - The port this server listens on. severity: default: DEBUG description: - The severity filter. The appliance sends log messages of the specified severity and above to the external syslog server. type: list config_addr_type: default: IPV4 description: - Address configuration type (IPV4/IPV6/BOTH) pre_provisioning: description: - Pre-provisioning information. elements: dict suboptions: hardware_info: description: - An array of structures that describe the hardware being pre-provisioned. elements: dict suboptions: hwmodel: description: - Hardware model hwtype: description: - Hardware type. type: list licenses: description: - An array of license types. type: list lan2_port_setting: description: - Settings for the Grid member LAN2 port if 'lan2_enabled' is set to "true". elements: dict suboptions: enabled: description: - If set to True, then it has its own IP settings. type: bool network_setting: description: - If the 'enable' field is set to True, this defines IPv4 network settings for LAN2. elements: dict suboptions: address: description: - The IPv4 Address of LAN2 gateway: description: - The default gateway of LAN2 subnet_mask: description: - The subnet mask of LAN2 type: list v6_network_setting: description: - If the 'enable' field is set to True, this defines IPv6 network settings for LAN2. elements: dict suboptions: cidr_prefix: description: - The IPv6 CIDR prefix of LAN2 gateway: description: - The gateway address of LAN2 virtual_ip: description: - The IPv6 Address of LAN2 type: list type: list mgmt_port_setting: description: - Settings for the member MGMT port. elements: dict suboptions: enabled: description: - Determines if MGMT port settings should be enabled. type: bool security_access_enabled: description: - Determines if security access on the MGMT port is enabled or not. type: bool vpn_enabled: description: - Determines if VPN on the MGMT port is enabled or not. type: bool type: list use_syslog_proxy_setting: description: - Use flag for external_syslog_server_enable , syslog_servers, syslog_proxy_setting, syslog_size type: bool external_syslog_server_enable: description: - Determines if external syslog servers should be enabled type: bool