community / community.general / 3.8.10 / module / interfaces_file Tweak settings in /etc/network/interfaces files Authors: Roman Belyakovsky (@hryamzik)community.general.interfaces_file (3.8.10) — module
Install with ansible-galaxy collection install community.general:==3.8.10
collections: - name: community.general version: 3.8.10
Manage (add, remove, change) individual interface options in an interfaces-style file without having to manage the file as a whole with, say, M(ansible.builtin.template) or M(ansible.builtin.assemble). Interface has to be presented in a file.
Read information about interfaces from interfaces-styled files
- name: Set eth1 mtu configuration value to 8000 community.general.interfaces_file: dest: /etc/network/interfaces.d/eth1.cfg iface: eth1 option: mtu value: 8000 backup: yes state: present register: eth1_cfg
dest: default: /etc/network/interfaces description: - Path to the interfaces file type: path mode: description: - The permissions the resulting filesystem object should have. - For those used to I(/usr/bin/chmod) remember that modes are actually octal numbers. You must give Ansible enough information to parse them correctly. For consistent results, quote octal numbers (for example, V('644') or V('1777')) so Ansible receives a string and can do its own conversion from string into number. Adding a leading zero (for example, V(0755)) works sometimes, but can fail in loops and some other circumstances. - Giving Ansible a number without following either of these rules will end up with a decimal number which will have unexpected results. - As of Ansible 1.8, the mode may be specified as a symbolic mode (for example, V(u+rwx) or V(u=rw,g=r,o=r)). - If O(mode) is not specified and the destination filesystem object B(does not) exist, the default C(umask) on the system will be used when setting the mode for the newly created filesystem object. - If O(mode) is not specified and the destination filesystem object B(does) exist, the mode of the existing filesystem object will be used. - Specifying O(mode) is the best way to ensure filesystem objects are created with the correct permissions. See CVE-2020-1736 for further details. type: raw group: description: - Name of the group that should own the filesystem object, as would be fed to I(chown). - When left unspecified, it uses the current group of the current user unless you are root, in which case it can preserve the previous ownership. type: str iface: description: - Name of the interface, required for value changes or option remove type: str owner: description: - Name of the user that should own the filesystem object, as would be fed to I(chown). - When left unspecified, it uses the current user unless you are root, in which case it can preserve the previous ownership. - Specifying a numeric username will be assumed to be a user ID and not a username. Avoid numeric usernames to avoid this confusion. type: str state: choices: - present - absent default: present description: - If set to C(absent) the option or section will be removed if present instead of created. type: str value: description: - If I(option) is not presented for the I(interface) and I(state) is C(present) option will be added. If I(option) already exists and is not C(pre-up), C(up), C(post-up) or C(down), it's value will be updated. C(pre-up), C(up), C(post-up) and C(down) options can't be updated, only adding new options, removing existing ones or cleaning the whole option set are supported type: str backup: default: 'no' description: - Create a backup file including the timestamp information so you can get the original file back if you somehow clobbered it incorrectly. type: bool option: description: - Name of the option, required for value changes or option remove type: str serole: description: - The role part of the SELinux filesystem object context. - When set to V(_default), it will use the C(role) portion of the policy if available. type: str setype: description: - The type part of the SELinux filesystem object context. - When set to V(_default), it will use the C(type) portion of the policy if available. type: str seuser: description: - The user part of the SELinux filesystem object context. - By default it uses the V(system) policy, where applicable. - When set to V(_default), it will use the C(user) portion of the policy if available. type: str selevel: description: - The level part of the SELinux filesystem object context. - This is the MLS/MCS attribute, sometimes known as the C(range). - When set to V(_default), it will use the C(level) portion of the policy if available. type: str attributes: aliases: - attr description: - The attributes the resulting filesystem object should have. - To get supported flags look at the man page for I(chattr) on the target system. - This string should contain the attributes in the same order as the one displayed by I(lsattr). - The C(=) operator is assumed as default, otherwise C(+) or C(-) operators need to be included in the string. type: str version_added: '2.3' version_added_collection: ansible.builtin unsafe_writes: default: false description: - Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target filesystem object. - By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target filesystem objects, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted filesystem objects, which cannot be updated atomically from inside the container and can only be written in an unsafe manner. - This option allows Ansible to fall back to unsafe methods of updating filesystem objects when atomic operations fail (however, it doesn't force Ansible to perform unsafe writes). - IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption. type: bool version_added: '2.2' version_added_collection: ansible.builtin address_family: description: - Address family of the interface, useful if same interface name is used for both inet and inet6 type: str
dest: description: destination file/path returned: success sample: /etc/network/interfaces type: str ifaces: contains: ifaces: contains: eth0: contains: address_family: description: interface address family returned: success sample: inet type: str down: description: list of C(down) scripts returned: success sample: - route del -net 10.10.10.0/24 gw 10.10.10.1 dev eth1 - route del -net 10.10.11.0/24 gw 10.10.11.1 dev eth2 type: list method: description: interface method returned: success sample: manual type: str mtu: description: other options, all values returned as strings returned: success sample: '1500' type: str post-up: description: list of C(post-up) scripts returned: success sample: - route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1 - route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2 type: list pre-up: description: list of C(pre-up) scripts returned: success sample: - route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1 - route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2 type: list up: description: list of C(up) scripts returned: success sample: - route add -net 10.10.10.0/24 gw 10.10.10.1 dev eth1 - route add -net 10.10.11.0/24 gw 10.10.11.1 dev eth2 type: list description: Name of the interface returned: success type: dict description: interface dictionary returned: success type: dict description: interfaces dictionary returned: success type: complex