community / community.network / 0.1.0 / module / slxos_linkagg Manage link aggregation groups on Extreme Networks SLX-OS network devices Authors: Matthew Stone (@bigmstone)community.network.slxos_linkagg (0.1.0) — module
Install with ansible-galaxy collection install community.network:==0.1.0
collections: - name: community.network version: 0.1.0
This module provides declarative management of link aggregation groups on Extreme Networks SLX-OS network devices.
- name: Create link aggregation group slxos_linkagg: group: 10 state: present
- name: Delete link aggregation group slxos_linkagg: group: 10 state: absent
- name: Set link aggregation group to members slxos_linkagg: group: 200 mode: active members: - Ethernet 0/1 - Ethernet 0/2
- name: Remove link aggregation group from Ethernet 0/1 slxos_linkagg: group: 200 mode: active members: - Ethernet 0/1
- name: Create aggregate of linkagg definitions slxos_linkagg: aggregate: - { group: 3, mode: on, members: [Ethernet 0/1] } - { group: 100, mode: passive, members: [Ethernet 0/2] }
mode: choices: - active - 'on' - passive description: - Mode of the link aggregation group. group: description: - Channel-group number for the port-channel Link aggregation group. Range 1-1024. purge: description: - Purge links not defined in the I(aggregate) parameter. type: bool state: choices: - present - absent default: present description: - State of the link aggregation group. members: description: - List of members of the link aggregation group. aggregate: description: List of link aggregation definitions.
commands: description: The list of configuration mode commands to send to the device returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface port-channel 30 - interface Ethernet 0/3 - channel-group 30 mode on - no interface port-channel 30 type: list