community / community.network / 5.0.2 / module / ce_bgp_af Manages BGP Address-family configuration on HUAWEI CloudEngine switches. Authors: wangdezhuang (@QijunPan)community.network.ce_bgp_af (5.0.2) — module
Install with ansible-galaxy collection install community.network:==5.0.2
collections: - name: community.network version: 5.0.2
Manages BGP Address-family configurations on HUAWEI CloudEngine switches.
- name: CloudEngine BGP address family test hosts: cloudengine connection: local gather_facts: false tasks: - name: "Config BGP Address_Family" community.network.ce_bgp_af: state: present vrf_name: js af_type: ipv4uni - name: "Undo BGP Address_Family" community.network.ce_bgp_af: state: absent vrf_name: js af_type: ipv4uni - name: "Config import route" community.network.ce_bgp_af: state: present vrf_name: js af_type: ipv4uni import_protocol: ospf import_process_id: 123 - name: "Undo import route" community.network.ce_bgp_af: state: absent vrf_name: js af_type: ipv4uni import_protocol: ospf import_process_id: 123 - name: "Config network route" community.network.ce_bgp_af: state: present vrf_name: js af_type: ipv4uni network_address: 1.1.1.1 mask_len: 24 - name: "Undo network route" community.network.ce_bgp_af: state: absent vrf_name: js af_type: ipv4uni network_address: 1.1.1.1 mask_len: 24
state: choices: - present - absent default: present description: - Specify desired state of the resource. af_type: choices: - ipv4uni - ipv4multi - ipv4vpn - ipv6uni - ipv6vpn - evpn description: - Address family type of a BGP instance. required: true mask_len: description: - Specify the mask length of an IP address. The value is an integer ranging from 0 to 128. vrf_name: description: - Name of a BGP instance. The name is a case-sensitive string of characters. The BGP instance can be used only after the corresponding VPN instance is created. The value is a string of 1 to 31 case-sensitive characters. required: true router_id: description: - ID of a router that is in IPv4 address format. The value is a string of 0 to 255 characters. The value is in dotted decimal notation. default_med: description: - Specify the Multi-Exit-Discriminator (MED) of BGP routes. The value is an integer ranging from 0 to 4294967295. determin_med: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, BGP deterministic-MED is enabled. If the value is false, BGP deterministic-MED is disabled. as_path_neglect: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the AS path attribute is ignored when BGP selects an optimal route. If the value is false, the AS path attribute is not ignored when BGP selects an optimal route. An AS path with a smaller length has a higher priority. auto_frr_enable: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, BGP auto FRR is enabled. If the value is false, BGP auto FRR is disabled. import_protocol: choices: - direct - ospf - isis - static - rip - ospfv3 - ripng description: - Routing protocol from which routes can be imported. lowest_priority: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, enable reduce priority to advertise route. If the value is false, disable reduce priority to advertise route. network_address: description: - Specify the IP address advertised by BGP. The value is a string of 0 to 255 characters. rib_only_enable: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, BGP routes cannot be advertised to the IP routing table. If the value is false, Routes preferred by BGP are advertised to the IP routing table. route_sel_delay: description: - Route selection delay. The value is an integer ranging from 0 to 3600. add_path_sel_num: description: - Number of Add-Path routes. The value is an integer ranging from 2 to 64. allow_invalid_as: choices: - no_use - 'true' - 'false' default: no_use description: - Allow routes with BGP origin AS validation result Invalid to be selected. If the value is true, invalid routes can participate in route selection. If the value is false, invalid routes cannot participate in route selection. originator_prior: choices: - no_use - 'true' - 'false' default: no_use description: - Originator prior. preference_local: description: - Set the protocol priority of a local BGP route. The value is an integer ranging from 1 to 255. reflect_chg_path: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the route reflector is enabled to modify route path attributes based on an export policy. If the value is false, the route reflector is disabled from modifying route path attributes based on an export policy. rr_filter_number: description: - Set the number of the extended community filter supported by an RR group. The value is a string of 1 to 51 characters. supernet_uni_adv: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the function to advertise supernetwork unicast routes is enabled. If the value is false, the function to advertise supernetwork unicast routes is disabled. vrf_rid_auto_sel: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, VPN BGP instances are enabled to automatically select router IDs. If the value is false, VPN BGP instances are disabled from automatically selecting router IDs. ebgp_if_sensitive: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, after the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are deleted immediately when the interface goes Down. If the value is false, after the fast EBGP interface awareness function is enabled, EBGP sessions on an interface are not deleted immediately when the interface goes Down. igp_metric_ignore: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the metrics of next-hop IGP routes are not compared when BGP selects an optimal route. If the value is false, the metrics of next-hop IGP routes are not compared when BGP selects an optimal route. A route with a smaller metric has a higher priority. import_process_id: description: - Process ID of an imported routing protocol. The value is an integer ranging from 0 to 4294967295. max_load_ebgp_num: description: - Specify the maximum number of equal-cost EBGP routes. The value is an integer ranging from 1 to 65535. max_load_ibgp_num: description: - Specify the maximum number of equal-cost IBGP routes. The value is an integer ranging from 1 to 65535. policy_vpn_target: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, VPN-Target filtering function is performed for received VPN routes. If the value is false, VPN-Target filtering function is not performed for received VPN routes. router_id_neglect: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the router ID attribute is ignored when BGP selects the optimal route. If the value is false, the router ID attribute is not ignored when BGP selects the optimal route. summary_automatic: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, automatic aggregation is enabled for locally imported routes. If the value is false, automatic aggregation is disabled for locally imported routes. always_compare_med: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the MEDs of routes learned from peers in different autonomous systems are compared when BGP selects an optimal route. If the value is false, the MEDs of routes learned from peers in different autonomous systems are not compared when BGP selects an optimal route. default_local_pref: description: - Set the Local-Preference attribute. The value is an integer. The value is an integer ranging from 0 to 4294967295. relay_delay_enable: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, relay delay enable. If the value is false, relay delay disable. supernet_label_adv: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the function to advertise supernetwork label is enabled. If the value is false, the function to advertise supernetwork label is disabled. med_none_as_maximum: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, when BGP selects an optimal route, the system uses 4294967295 as the MED value of a route if the route's attribute does not carry a MED value. If the value is false, the system uses 0 as the MED value of a route if the route's attribute does not carry a MED value. nexthop_third_party: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the third-party next hop function is enabled. If the value is false, the third-party next hop function is disabled. preference_external: description: - Set the protocol priority of EBGP routes. The value is an integer ranging from 1 to 255. preference_internal: description: - Set the protocol priority of IBGP routes. The value is an integer ranging from 1 to 255. ecmp_nexthop_changed: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the next hop of an advertised route is changed to the advertiser itself in BGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in BGP load-balancing scenarios. maximum_load_balance: description: - Specify the maximum number of equal-cost routes in the BGP routing table. The value is an integer ranging from 1 to 65535. reflector_cluster_id: description: - Set a cluster ID. Configuring multiple RRs in a cluster can enhance the stability of the network. The value is an integer ranging from 1 to 4294967295. rib_only_policy_name: description: - Specify the name of a routing policy. The value is a string of 1 to 40 characters. prefrence_policy_name: description: - Set a routing policy to filter routes so that a configured priority is applied to the routes that match the specified policy. The value is a string of 1 to 40 characters. active_route_advertise: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, BGP is enabled to advertise only optimal routes in the RM to peers. If the value is false, BGP is not enabled to advertise only optimal routes in the RM to peers. policy_ext_comm_enable: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, modifying extended community attributes is allowed. If the value is false, modifying extended community attributes is not allowed. reflect_between_client: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, route reflection is enabled between clients. If the value is false, route reflection is disabled between clients. reflector_cluster_ipv4: description: - Set a cluster ipv4 address. The value is expressed in the format of an IPv4 address. ingress_lsp_policy_name: description: - Ingress lsp policy name. default_rt_import_enable: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, importing default routes to the BGP routing table is allowed. If the value is false, importing default routes to the BGP routing table is not allowed. next_hop_sel_depend_type: choices: - default - dependTunnel - dependIp default: default description: - Next hop select depend type. ebgp_ecmp_nexthop_changed: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the next hop of an advertised route is changed to the advertiser itself in EBGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in EBGP load-balancing scenarios. ibgp_ecmp_nexthop_changed: choices: - no_use - 'true' - 'false' default: no_use description: - If the value is true, the next hop of an advertised route is changed to the advertiser itself in IBGP load-balancing scenarios. If the value is false, the next hop of an advertised route is not changed to the advertiser itself in IBGP load-balancing scenarios. nhp_relay_route_policy_name: description: - Specify the name of a route-policy for route iteration. The value is a string of 1 to 40 characters. load_balancing_as_path_ignore: choices: - no_use - 'true' - 'false' default: no_use description: - Load balancing as path ignore.
changed: description: check to see if a change was made on the device returned: always sample: true type: bool end_state: description: k/v pairs of aaa params after module execution returned: always sample: af_type: ipv4uni vrf_name: js type: dict existing: description: k/v pairs of existing aaa server returned: always sample: {} type: dict proposed: description: k/v pairs of parameters passed into module returned: always sample: af_type: ipv4uni state: present vrf_name: js type: dict updates: description: command sent to the device returned: always sample: - ipv4-family vpn-instance js type: list