community / community.network / 5.0.2 / module / ce_ospf_vrf Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches. Authors: Yang yang (@QijunPan)community.network.ce_ospf_vrf (5.0.2) — module
Install with ansible-galaxy collection install community.network:==5.0.2
collections: - name: community.network version: 5.0.2
Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.
- name: Ospf vrf module test hosts: cloudengine connection: local gather_facts: false tasks: - name: Configure ospf route id community.network.ce_ospf_vrf: ospf: 2 route_id: 2.2.2.2 lsaointervalflag: false lsaointerval: 2
vrf: default: _public_ description: - Specifies the vpn instance which use ospf,length is 1 - 31. Valid values are a string. ospf: description: - The ID of the ospf process. Valid values are an integer, 1 - 4294967295, the default value is 1. required: true state: choices: - present - absent default: present description: - Specify desired state of the resource. route_id: description: - Specifies the ospf private route id,. Valid values are a string, formatted as an IP address (i.e. "10.1.1.1") the length is 0 - 20. bandwidth: description: - Specifies the reference bandwidth used to assign ospf cost. Valid values are an integer, in Mbps, 1 - 2147483648, the default value is 100. lsaalflag: default: 'no' description: - Specifies the mode of timer to calculate interval of arrive LSA. If set the parameter but not specifies value, the default will be used. If true use general timer. If false use intelligent timer. type: bool description: description: - Specifies the description information of ospf process. spfinterval: description: - Specifies the interval to calculate SPF when use second level timer. Valid value is an integer, in second, from 1 to 10. lsaainterval: description: - Specifies the interval of arrive LSA when use the general timer. Valid value is an integer, in millisecond, from 0 to 10000. lsaointerval: description: - Specifies the interval of originate LSA . Valid value is an integer, in second, from 0 to 10, the default value is 5. spfintervalmi: description: - Specifies the interval to calculate SPF when use millisecond level timer. Valid value is an integer, in millisecond, from 1 to 10000. spfmaxinterval: description: - Specifies the max interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 20000, the default value is 5000. lsaamaxinterval: description: - Specifies the max interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 1000. lsaomaxinterval: description: - Specifies the max interval of originate LSA . Valid value is an integer, in millisecond, from 1 to 10000, the default value is 5000. spfholdinterval: description: - Specifies the hold interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 5000, the default value is 200. spfintervaltype: choices: - intelligent-timer - timer - millisecond default: intelligent-timer description: - Specifies the mode of timer which used to calculate SPF. If set the parameter but noe specifies value, the default will be used. If is intelligent-timer, then use intelligent timer. If is timer, then use second level timer. If is millisecond, then use millisecond level timer. lsaaholdinterval: description: - Specifies the hold interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500. lsaoholdinterval: description: - Specifies the hold interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 5000, the default value is 1000. lsaointervalflag: default: 'no' description: - Specifies whether cancel the interval of LSA originate or not. If set the parameter but noe specifies value, the default will be used. true:cancel the interval of LSA originate, the interval is 0. false:do not cancel the interval of LSA originate. type: bool spfstartinterval: description: - Specifies the start interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 1000, the default value is 50. lsaastartinterval: description: - Specifies the start interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500. lsaostartinterval: description: - Specifies the start interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 1000, the default value is 500.
changed: description: check to see if a change was made on the device returned: always sample: false type: bool end_state: description: k/v pairs of configuration after module execution returned: verbose mode sample: bandwidthReference: '100' description: null lsaArrivalFlag: 'false' lsaArrivalHoldInterval: '500' lsaArrivalInterval: null lsaArrivalMaxInterval: '1000' lsaArrivalStartInterval: '500' lsaOriginateHoldInterval: '1000' lsaOriginateInterval: '2' lsaOriginateIntervalFlag: 'false' lsaOriginateMaxInterval: '5000' lsaOriginateStartInterval: '500' processId: '2' routerId: 2.2.2.2 spfScheduleHoldInterval: '1000' spfScheduleInterval: null spfScheduleIntervalMillisecond: null spfScheduleIntervalType: intelligent-timer spfScheduleMaxInterval: '10000' spfScheduleStartInterval: '500' vrfName: _public_ type: dict existing: description: k/v pairs of existing configuration returned: verbose mode sample: bandwidthReference: '100' description: null lsaArrivalFlag: 'false' lsaArrivalHoldInterval: '500' lsaArrivalInterval: null lsaArrivalMaxInterval: '1000' lsaArrivalStartInterval: '500' lsaOriginateHoldInterval: '1000' lsaOriginateInterval: '2' lsaOriginateIntervalFlag: 'false' lsaOriginateMaxInterval: '5000' lsaOriginateStartInterval: '500' processId: '2' routerId: 2.2.2.2 spfScheduleHoldInterval: '1000' spfScheduleInterval: null spfScheduleIntervalMillisecond: null spfScheduleIntervalType: intelligent-timer spfScheduleMaxInterval: '10000' spfScheduleStartInterval: '500' vrfName: _public_ type: dict proposed: description: k/v pairs of parameters passed into module returned: verbose mode sample: bandwidth: '100' description: null lsaaholdinterval: '500' lsaainterval: null lsaalflag: 'False' lsaamaxinterval: '1000' lsaastartinterval: '500' lsaoholdinterval: '1000' lsaointerval: '2' lsaointervalflag: 'False' lsaomaxinterval: '5000' lsaostartinterval: '500' process_id: '2' route_id: 2.2.2.2 spfholdinterval: '1000' spfinterval: null spfintervalmi: null spfintervaltype: intelligent-timer spfmaxinterval: '10000' spfstartinterval: '500' vrf: _public_ type: dict updates: description: commands sent to the device returned: always sample: - ospf 2 type: list