community / community.network / 5.0.2 / module / cnos_l2_interface Manage Layer-2 interface on Lenovo CNOS devices. Authors: Anil Kumar Muraleedharan (@amuraleedhar)community.network.cnos_l2_interface (5.0.2) — module
Install with ansible-galaxy collection install community.network:==5.0.2
collections: - name: community.network version: 5.0.2
This module provides declarative management of Layer-2 interfaces on Lenovo CNOS devices.
- name: Ensure Ethernet1/5 is in its default l2 interface state community.network.cnos_l2_interface: name: Ethernet1/5 state: unconfigured
- name: Ensure Ethernet1/5 is configured for access vlan 20 community.network.cnos_l2_interface: name: Ethernet1/5 mode: access access_vlan: 20
- name: Ensure Ethernet1/5 only has vlans 5-10 as trunk vlans community.network.cnos_l2_interface: name: Ethernet1/5 mode: trunk native_vlan: 10 trunk_vlans: 5-10
- name: Ensure Ethernet1/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged) community.network.cnos_l2_interface: name: Ethernet1/5 mode: trunk native_vlan: 10 trunk_vlans: 2-50
- name: Ensure these VLANs are not being tagged on the trunk community.network.cnos_l2_interface: name: Ethernet1/5 mode: trunk trunk_vlans: 51-4094 state: absent
mode: choices: - access - trunk default: access description: - Mode in which interface needs to be configured. name: aliases: - interface description: - Full name of the interface excluding any logical unit number, i.e. Ethernet1/3. required: true state: choices: - present - absent - unconfigured default: present description: - Manage the state of the Layer-2 Interface configuration. aggregate: description: - List of Layer-2 interface definitions. access_vlan: description: - Configure given VLAN in access port. If C(mode=access), used as the access VLAN ID. native_vlan: description: - Native VLAN to be configured in trunk port. If C(mode=trunk), used as the trunk native VLAN ID. trunk_vlans: description: - List of VLANs to be configured in trunk port. If C(mode=trunk), used as the VLAN range to ADD or REMOVE from the trunk. trunk_allowed_vlans: description: - List of allowed VLANs in a given trunk port. If C(mode=trunk), these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
commands: description: The list of configuration mode commands to send to the device returned: always, except for the platforms that use Netconf transport to manage the device. sample: - interface Ethernet1/5 - switchport access vlan 20 type: list