f5networks / f5networks.f5_modules / 1.28.0 / module / bigip_monitor_smtp Manage SMTP monitors on a BIG-IP | "added in version" 1.1.0 of f5networks.f5_modules" Authors: Wojciech Wypior (@wojtek0806)f5networks.f5_modules.bigip_monitor_smtp (1.28.0) — module
Install with ansible-galaxy collection install f5networks.f5_modules:==1.28.0
collections: - name: f5networks.f5_modules version: 1.28.0
Manage SMTP monitors on a BIG-IP.
- name: Create SMTP Monitor bigip_monitor_smtp: state: present ip: 10.10.10.10 name: my_smtp_monitor domain: foo.com provider: server: lb.mydomain.com user: admin password: secret delegate_to: localhost
- name: Remove SMTP Monitor bigip_monitor_smtp: state: absent name: my_smtp_monitor provider: server: lb.mydomain.com user: admin password: secret delegate_to: localhost
ip: description: - IP address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is '*'. type: str name: description: - Specifies the name of the monitor. required: true type: str port: description: - Port address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is '*'. If specifying an IP address, you must specify a value between 1 and 65535. type: str debug: description: - Specifies whether the monitor sends error messages and additional information to a log file created and labeled specifically for this monitor. - When C(true) the system redirects error messages and additional information to the C(/var/log/monitors/<monitor_name>-<node_name>-<port>.log) file. type: bool state: choices: - present - absent default: present description: - When C(present), ensures the monitor exists. - When C(absent), ensures the monitor is removed. type: str domain: description: - Specifies the domain name to check. type: str parent: description: - The parent template of this monitor template. Once this value has been set, it cannot be changed. - When creating a new monitor, if this parameter is not specified, the default is the system-supplied C(smtp) monitor. type: str timeout: description: - The number of seconds in which the node or service must respond to the monitor request. - If the target responds within the set time period, it is considered up. - If the target does not respond within the set time period, it is considered down. - You can change this to any number, however, it should be 3 times the interval number of seconds plus 1 second. - If this parameter is not provided when creating a new monitor, the default value will be C(31). type: int interval: description: - The interval specifying how frequently the monitor instance of this template will run. - This value B(must) be less than the C(timeout) value. - When creating a new monitor, if this parameter is not provided, the default C(5) will be used. type: int provider: description: - A dict object containing connection details. suboptions: auth_provider: description: - Configures the auth provider for to obtain authentication tokens from the remote device. - This option is really used when working with BIG-IQ devices. type: str no_f5_teem: default: false description: - If C(yes), TEEM telemetry data is not sent to F5. - You may omit this option by setting the environment variable C(F5_TELEMETRY_OFF). - Previously used variable C(F5_TEEM) is deprecated as its name was confusing. type: bool password: aliases: - pass - pwd description: - The password for the user account used to connect to the BIG-IP or the BIG-IQ. - You may omit this option by setting the environment variable C(F5_PASSWORD). required: true type: str server: description: - The BIG-IP host or the BIG-IQ host. - You may omit this option by setting the environment variable C(F5_SERVER). required: true type: str server_port: default: 443 description: - The BIG-IP server port. - You may omit this option by setting the environment variable C(F5_SERVER_PORT). type: int timeout: description: - Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. type: int transport: choices: - rest default: rest description: - Configures the transport connection to use when connecting to the remote device. type: str user: description: - The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. - You may omit this option by setting the environment variable C(F5_USER). required: true type: str validate_certs: default: true description: - If C(no), SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. - You may omit this option by setting the environment variable C(F5_VALIDATE_CERTS). type: bool type: dict version_added: 1.0.0 version_added_collection: f5networks.f5_modules partition: default: Common description: - Device partition to manage resources on. type: str app_service: description: - The iApp service to be associated with this profile. When no service is specified, the default is None. type: str description: description: - The description of the monitor. type: str up_interval: description: - Specifies the interval for the system to use to perform the health check when a resource is up. - When C(0), specifies the system uses the interval specified in C(interval) to check the health of the resource. - When any other number, enables you to specify a different interval to use when checking the health of a resource that is up. - When creating a new monitor, if this parameter is not provided, the default C(0) will be used. type: int manual_resume: description: - Specifies whether the system automatically changes the status of a resource to B(enabled) at the next successful monitor check. - If you set this option to C(true), you must manually re-enable the resource before the system can use it for load balancing connections. - When creating a new monitor, if this parameter is not specified, the default value is C(false). - When C(true), specifies you must manually re-enable the resource after an unsuccessful monitor check. - When C(false), specifies the system automatically changes the status of a resource to B(enabled) at the next successful monitor check. type: bool time_until_up: description: - Specifies the amount of time in seconds after the first successful response before a node will be marked up. - A value of C(0) will cause a node to be marked up immediately after a valid response is received from the node. - If this parameter is not provided when creating a new monitor, then the default value will be C(0). type: int
app_service: description: The iApp service associated with this monitor. returned: changed sample: /Common/good_service.app/good_service type: str debug: description: - Whether the monitor sends error messages and additional information to a log file created and labeled specifically for this monitor. returned: changed sample: false type: bool description: description: The description of the monitor. returned: changed sample: Important Monitor type: str domain: description: Specifies the domain name to check. returned: changed sample: bigipinternal.com type: str interval: description: The new interval in which to run the monitor check. returned: changed sample: 2 type: int ip: description: The new IP of IP/port definition. returned: changed sample: 10.12.13.14 type: str manual_resume: description: - Specifies whether the system automatically changes the status of a resource to up at the next successful monitor check. returned: changed sample: true type: bool parent: description: The parent monitor. returned: changed sample: /Common/foo_smtp type: str port: description: - Alias port or service for the monitor to check, on behalf of the pools or pool members with which the monitor is associated. returned: changed sample: 80 type: str time_until_up: description: The new time in which to mark a system as up after first successful response. returned: changed sample: 2 type: int timeout: description: The new timeout in which the remote system must respond to the monitor. returned: changed sample: 10 type: int up_interval: description: Interval for the system to use to perform the health check when a resource is up. returned: changed sample: 0 type: int