fortinet / fortinet.fortios / 1.0.6 / module / fortios_router_isis Configure IS-IS in Fortinet's FortiOS and FortiGate. | "added in version" 2.9 of fortinet.fortios" Authors: Miguel Angel Munoz (@mamunozgonzalez), Nicolas Thomas (@thomnico) preview | supported by communityfortinet.fortios.fortios_router_isis (1.0.6) — module
Install with ansible-galaxy collection install fortinet.fortios:==1.0.6
collections: - name: fortinet.fortios version: 1.0.6
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and isis category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5
- hosts: localhost vars: host: "192.168.122.40" username: "admin" password: "" vdom: "root" ssl_verify: "False" tasks: - name: Configure IS-IS. fortios_router_isis: host: "{{ host }}" username: "{{ username }}" password: "{{ password }}" vdom: "{{ vdom }}" https: "False" router_isis: adjacency_check: "enable" adjacency_check6: "enable" adv_passive_only: "enable" adv_passive_only6: "enable" auth_keychain_l1: "<your_own_value> (source router.key-chain.name)" auth_keychain_l2: "<your_own_value> (source router.key-chain.name)" auth_mode_l1: "password" auth_mode_l2: "password" auth_password_l1: "<your_own_value>" auth_password_l2: "<your_own_value>" auth_sendonly_l1: "enable" auth_sendonly_l2: "enable" default_originate: "enable" default_originate6: "enable" dynamic_hostname: "enable" ignore_lsp_errors: "enable" is_type: "level-1-2" isis_interface: - auth_keychain_l1: "<your_own_value> (source router.key-chain.name)" auth_keychain_l2: "<your_own_value> (source router.key-chain.name)" auth_mode_l1: "md5" auth_mode_l2: "md5" auth_password_l1: "<your_own_value>" auth_password_l2: "<your_own_value>" auth_send_only_l1: "enable" auth_send_only_l2: "enable" circuit_type: "level-1-2" csnp_interval_l1: "30" csnp_interval_l2: "31" hello_interval_l1: "32" hello_interval_l2: "33" hello_multiplier_l1: "34" hello_multiplier_l2: "35" hello_padding: "enable" lsp_interval: "37" lsp_retransmit_interval: "38" mesh_group: "enable" mesh_group_id: "40" metric_l1: "41" metric_l2: "42" name: "default_name_43 (source system.interface.name)" network_type: "broadcast" priority_l1: "45" priority_l2: "46" status: "enable" status6: "enable" wide_metric_l1: "49" wide_metric_l2: "50" isis_net: - id: "52" net: "<your_own_value>" lsp_gen_interval_l1: "54" lsp_gen_interval_l2: "55" lsp_refresh_interval: "56" max_lsp_lifetime: "57" metric_style: "narrow" overload_bit: "enable" overload_bit_on_startup: "60" overload_bit_suppress: "external" redistribute: - level: "level-1-2" metric: "64" metric_type: "external" protocol: "<your_own_value>" routemap: "<your_own_value> (source router.route-map.name)" status: "enable" redistribute_l1: "enable" redistribute_l1_list: "<your_own_value> (source router.access-list.name)" redistribute_l2: "enable" redistribute_l2_list: "<your_own_value> (source router.access-list.name)" redistribute6: - level: "level-1-2" metric: "75" metric_type: "external" protocol: "<your_own_value>" routemap: "<your_own_value> (source router.route-map.name)" status: "enable" redistribute6_l1: "enable" redistribute6_l1_list: "<your_own_value> (source router.access-list6.name)" redistribute6_l2: "enable" redistribute6_l2_list: "<your_own_value> (source router.access-list6.name)" spf_interval_exp_l1: "<your_own_value>" spf_interval_exp_l2: "<your_own_value>" summary_address: - id: "87" level: "level-1-2" prefix: "<your_own_value>" summary_address6: - id: "91" level: "level-1-2" prefix6: "<your_own_value>"
host: description: - FortiOS or FortiGate IP address. required: false type: str vdom: default: root description: - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str https: default: true description: - Indicates if the requests towards FortiGate must use HTTPS protocol. type: bool password: default: '' description: - FortiOS or FortiGate password. type: str username: description: - FortiOS or FortiGate username. required: false type: str ssl_verify: default: true description: - Ensures FortiGate certificate must be verified by a proper CA. type: bool router_isis: default: null description: - Configure IS-IS. suboptions: adjacency_check: choices: - enable - disable description: - Enable/disable adjacency check. type: str adjacency_check6: choices: - enable - disable description: - Enable/disable IPv6 adjacency check. type: str adv_passive_only: choices: - enable - disable description: - Enable/disable IS-IS advertisement of passive interfaces only. type: str adv_passive_only6: choices: - enable - disable description: - Enable/disable IPv6 IS-IS advertisement of passive interfaces only. type: str auth_keychain_l1: description: - Authentication key-chain for level 1 PDUs. Source router.key-chain.name. type: str auth_keychain_l2: description: - Authentication key-chain for level 2 PDUs. Source router.key-chain.name. type: str auth_mode_l1: choices: - password - md5 description: - Level 1 authentication mode. type: str auth_mode_l2: choices: - password - md5 description: - Level 2 authentication mode. type: str auth_password_l1: description: - Authentication password for level 1 PDUs. type: str auth_password_l2: description: - Authentication password for level 2 PDUs. type: str auth_sendonly_l1: choices: - enable - disable description: - Enable/disable level 1 authentication send-only. type: str auth_sendonly_l2: choices: - enable - disable description: - Enable/disable level 2 authentication send-only. type: str default_originate: choices: - enable - disable description: - Enable/disable distribution of default route information. type: str default_originate6: choices: - enable - disable description: - Enable/disable distribution of default IPv6 route information. type: str dynamic_hostname: choices: - enable - disable description: - Enable/disable dynamic hostname. type: str ignore_lsp_errors: choices: - enable - disable description: - Enable/disable ignoring of LSP errors with bad checksums. type: str is_type: choices: - level-1-2 - level-1 - level-2-only description: - IS type. type: str isis_interface: description: - IS-IS interface configuration. suboptions: auth_keychain_l1: description: - Authentication key-chain for level 1 PDUs. Source router.key-chain.name. type: str auth_keychain_l2: description: - Authentication key-chain for level 2 PDUs. Source router.key-chain.name. type: str auth_mode_l1: choices: - md5 - password description: - Level 1 authentication mode. type: str auth_mode_l2: choices: - md5 - password description: - Level 2 authentication mode. type: str auth_password_l1: description: - Authentication password for level 1 PDUs. type: str auth_password_l2: description: - Authentication password for level 2 PDUs. type: str auth_send_only_l1: choices: - enable - disable description: - Enable/disable authentication send-only for level 1 PDUs. type: str auth_send_only_l2: choices: - enable - disable description: - Enable/disable authentication send-only for level 2 PDUs. type: str circuit_type: choices: - level-1-2 - level-1 - level-2 description: - IS-IS interface's circuit type type: str csnp_interval_l1: description: - Level 1 CSNP interval. type: int csnp_interval_l2: description: - Level 2 CSNP interval. type: int hello_interval_l1: description: - Level 1 hello interval. type: int hello_interval_l2: description: - Level 2 hello interval. type: int hello_multiplier_l1: description: - Level 1 multiplier for Hello holding time. type: int hello_multiplier_l2: description: - Level 2 multiplier for Hello holding time. type: int hello_padding: choices: - enable - disable description: - Enable/disable padding to IS-IS hello packets. type: str lsp_interval: description: - LSP transmission interval (milliseconds). type: int lsp_retransmit_interval: description: - LSP retransmission interval (sec). type: int mesh_group: choices: - enable - disable description: - Enable/disable IS-IS mesh group. type: str mesh_group_id: description: - 'Mesh group ID <0-4294967295>, 0: mesh-group blocked.' type: int metric_l1: description: - Level 1 metric for interface. type: int metric_l2: description: - Level 2 metric for interface. type: int name: description: - IS-IS interface name. Source system.interface.name. required: true type: str network_type: choices: - broadcast - point-to-point - loopback description: - IS-IS interface's network type type: str priority_l1: description: - Level 1 priority. type: int priority_l2: description: - Level 2 priority. type: int status: choices: - enable - disable description: - Enable/disable interface for IS-IS. type: str status6: choices: - enable - disable description: - Enable/disable IPv6 interface for IS-IS. type: str wide_metric_l1: description: - Level 1 wide metric for interface. type: int wide_metric_l2: description: - Level 2 wide metric for interface. type: int type: list isis_net: description: - IS-IS net configuration. suboptions: id: description: - isis-net ID. required: true type: int net: description: - IS-IS net xx.xxxx. ... .xxxx.xx. type: str type: list lsp_gen_interval_l1: description: - Minimum interval for level 1 LSP regenerating. type: int lsp_gen_interval_l2: description: - Minimum interval for level 2 LSP regenerating. type: int lsp_refresh_interval: description: - LSP refresh time in seconds. type: int max_lsp_lifetime: description: - Maximum LSP lifetime in seconds. type: int metric_style: choices: - narrow - wide - transition - narrow-transition - narrow-transition-l1 - narrow-transition-l2 - wide-l1 - wide-l2 - wide-transition - wide-transition-l1 - wide-transition-l2 - transition-l1 - transition-l2 description: - Use old-style (ISO 10589) or new-style packet formats type: str overload_bit: choices: - enable - disable description: - Enable/disable signal other routers not to use us in SPF. type: str overload_bit_on_startup: description: - Overload-bit only temporarily after reboot. type: int overload_bit_suppress: choices: - external - interlevel description: - Suppress overload-bit for the specific prefixes. type: str redistribute: description: - IS-IS redistribute protocols. suboptions: level: choices: - level-1-2 - level-1 - level-2 description: - Level. type: str metric: description: - Metric. type: int metric_type: choices: - external - internal description: - Metric type. type: str protocol: description: - Protocol name. required: true type: str routemap: description: - Route map name. Source router.route-map.name. type: str status: choices: - enable - disable description: - Status. type: str type: list redistribute6: description: - IS-IS IPv6 redistribution for routing protocols. suboptions: level: choices: - level-1-2 - level-1 - level-2 description: - Level. type: str metric: description: - Metric. type: int metric_type: choices: - external - internal description: - Metric type. type: str protocol: description: - Protocol name. required: true type: str routemap: description: - Route map name. Source router.route-map.name. type: str status: choices: - enable - disable description: - Enable/disable redistribution. type: str type: list redistribute6_l1: choices: - enable - disable description: - Enable/disable redistribution of level 1 IPv6 routes into level 2. type: str redistribute6_l1_list: description: - Access-list for IPv6 route redistribution from l1 to l2. Source router.access-list6.name. type: str redistribute6_l2: choices: - enable - disable description: - Enable/disable redistribution of level 2 IPv6 routes into level 1. type: str redistribute6_l2_list: description: - Access-list for IPv6 route redistribution from l2 to l1. Source router.access-list6.name. type: str redistribute_l1: choices: - enable - disable description: - Enable/disable redistribution of level 1 routes into level 2. type: str redistribute_l1_list: description: - Access-list for route redistribution from l1 to l2. Source router.access-list.name. type: str redistribute_l2: choices: - enable - disable description: - Enable/disable redistribution of level 2 routes into level 1. type: str redistribute_l2_list: description: - Access-list for route redistribution from l2 to l1. Source router.access-list.name. type: str spf_interval_exp_l1: description: - Level 1 SPF calculation delay. type: str spf_interval_exp_l2: description: - Level 2 SPF calculation delay. type: str summary_address: description: - IS-IS summary addresses. suboptions: id: description: - Summary address entry ID. required: true type: int level: choices: - level-1-2 - level-1 - level-2 description: - Level. type: str prefix: description: - Prefix. type: str type: list summary_address6: description: - IS-IS IPv6 summary address. suboptions: id: description: - Prefix entry ID. required: true type: int level: choices: - level-1-2 - level-1 - level-2 description: - Level. type: str prefix6: description: - IPv6 prefix. type: str type: list type: dict
build: description: Build number of the fortigate image returned: always sample: '1547' type: str http_method: description: Last method used to provision the content into FortiGate returned: always sample: PUT type: str http_status: description: Last result given by FortiGate on last operation applied returned: always sample: '200' type: str mkey: description: Master key (id) used in the last call to FortiGate returned: success sample: id type: str name: description: Name of the table used to fulfill the request returned: always sample: urlfilter type: str path: description: Path of the table used to fulfill the request returned: always sample: webfilter type: str revision: description: Internal revision number returned: always sample: 17.0.2.10658 type: str serial: description: Serial number of the unit returned: always sample: FGVMEVYYQT3AB5352 type: str status: description: Indication of the operation's result returned: always sample: success type: str vdom: description: Virtual domain used returned: always sample: root type: str version: description: Version of the FortiGate returned: always sample: v5.6.3 type: str