fortinet / fortinet.fortios / 2.3.6 / module / fortios_system_cluster_sync Configure FortiGate Session Life Support Protocol (FGSP) session synchronization in Fortinet's FortiOS and FortiGate. | "added in version" 2.0.0 of fortinet.fortios" Authors: Link Zheng (@chillancezen), Jie Xue (@JieX19), Hongbin Lu (@fgtdev-hblu), Frank Shen (@frankshen01), Miguel Angel Munoz (@mamunozgonzalez), Nicolas Thomas (@thomnico) preview | supported by communityfortinet.fortios.fortios_system_cluster_sync (2.3.6) — module
Install with ansible-galaxy collection install fortinet.fortios:==2.3.6
collections: - name: fortinet.fortios version: 2.3.6
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and cluster_sync category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
- name: Configure FortiGate Session Life Support Protocol (FGSP) session synchronization. fortinet.fortios.fortios_system_cluster_sync: vdom: "{{ vdom }}" state: "present" access_token: "<your_own_value>" system_cluster_sync: down_intfs_before_sess_sync: - name: "default_name_4 (source system.interface.name)" hb_interval: "2" hb_lost_threshold: "3" ike_heartbeat_interval: "3" ike_monitor: "enable" ike_monitor_interval: "15" ike_seqjump_speed: "10" ipsec_tunnel_sync: "enable" peerip: "<your_own_value>" peervd: "<your_own_value> (source system.vdom.name)" secondary_add_ipsec_routes: "enable" session_sync_filter: custom_service: - dst_port_range: "<your_own_value>" id: "18" src_port_range: "<your_own_value>" dstaddr: "<your_own_value>" dstaddr6: "<your_own_value>" dstintf: "<your_own_value> (source system.interface.name)" srcaddr: "<your_own_value>" srcaddr6: "<your_own_value>" srcintf: "<your_own_value> (source system.interface.name)" slave_add_ike_routes: "enable" sync_id: "<you_own_value>" syncvd: - name: "default_name_29 (source system.vdom.name)"
vdom: default: root description: - Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. type: str state: choices: - present - absent description: - Indicates whether to create or remove the object. required: true type: str enable_log: default: false description: - Enable/Disable logging for task. required: false type: bool member_path: description: - Member attribute path to operate on. - Delimited by a slash character if there are more than one attribute. - Parameter marked with member_path is legitimate for doing member operation. type: str access_token: description: - Token-based authentication. Generated from GUI of Fortigate. required: false type: str member_state: choices: - present - absent description: - Add or delete a member under specified attribute path. - When member_state is specified, the state option is ignored. type: str system_cluster_sync: default: null description: - Configure FortiGate Session Life Support Protocol (FGSP) session synchronization. suboptions: down_intfs_before_sess_sync: description: - List of interfaces to be turned down before session synchronization is complete. elements: dict suboptions: name: description: - Interface name. Source system.interface.name. required: true type: str type: list hb_interval: description: - Heartbeat interval (1 - 10 sec). type: int hb_lost_threshold: description: - Lost heartbeat threshold (1 - 10). type: int ike_heartbeat_interval: description: - IKE heartbeat interval (1 - 60 secs). type: int ike_monitor: choices: - enable - disable description: - Enable/disable IKE HA monitor. type: str ike_monitor_interval: description: - IKE HA monitor interval (10 - 300 secs). type: int ike_seqjump_speed: description: - ESP jump ahead factor (1G - 10G pps equivalent). type: int ipsec_tunnel_sync: choices: - enable - disable description: - Enable/disable IPsec tunnel synchronization. type: str peerip: description: - IP address of the interface on the peer unit that is used for the session synchronization link. type: str peervd: description: - VDOM that contains the session synchronization link interface on the peer unit. Usually both peers would have the same peervd. Source system.vdom.name. type: str secondary_add_ipsec_routes: choices: - enable - disable description: - Enable/disable IKE route announcement on the backup unit. type: str session_sync_filter: description: - Add one or more filters if you only want to synchronize some sessions. Use the filter to configure the types of sessions to synchronize. suboptions: custom_service: description: - Only sessions using these custom services are synchronized. Use source and destination port ranges to define these custom services. elements: dict suboptions: dst_port_range: description: - Custom service destination port range. type: str id: description: - Custom service ID. see <a href='#notes'>Notes</a>. required: true type: int src_port_range: description: - Custom service source port range. type: str type: list dstaddr: description: - Only sessions to this IPv4 address are synchronized. type: str dstaddr6: description: - Only sessions to this IPv6 address are synchronized. type: str dstintf: description: - Only sessions to this interface are synchronized. Source system.interface.name. type: str srcaddr: description: - Only sessions from this IPv4 address are synchronized. type: str srcaddr6: description: - Only sessions from this IPv6 address are synchronized. type: str srcintf: description: - Only sessions from this interface are synchronized. Source system.interface.name. type: str type: dict slave_add_ike_routes: choices: - enable - disable description: - Enable/disable IKE route announcement on the backup unit. type: str sync_id: description: - Sync ID. see <a href='#notes'>Notes</a>. required: true type: int syncvd: description: - Sessions from these VDOMs are synchronized using this session synchronization configuration. elements: dict suboptions: name: description: - VDOM name. Source system.vdom.name. required: true type: str type: list type: dict
build: description: Build number of the fortigate image returned: always sample: '1547' type: str http_method: description: Last method used to provision the content into FortiGate returned: always sample: PUT type: str http_status: description: Last result given by FortiGate on last operation applied returned: always sample: '200' type: str mkey: description: Master key (id) used in the last call to FortiGate returned: success sample: id type: str name: description: Name of the table used to fulfill the request returned: always sample: urlfilter type: str path: description: Path of the table used to fulfill the request returned: always sample: webfilter type: str revision: description: Internal revision number returned: always sample: 17.0.2.10658 type: str serial: description: Serial number of the unit returned: always sample: FGVMEVYYQT3AB5352 type: str status: description: Indication of the operation's result returned: always sample: success type: str vdom: description: Virtual domain used returned: always sample: root type: str version: description: Version of the FortiGate returned: always sample: v5.6.3 type: str