fortinet.fortios.fortios_system_pppoe_interface (2.3.6) — module

Install collection

Install with ansible-galaxy collection install fortinet.fortios:==2.3.6

Add to requirements.yml

  collections:
    - name: fortinet.fortios
      version: 2.3.6

Description

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and pppoe_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

• ansible>=2.15

Usage examples

Scanned by Steampunk Spotter

• Success
  Steampunk Spotter scan finished with no errors, warnings or hints.

- name: Configure the PPPoE interfaces.
  fortinet.fortios.fortios_system_pppoe_interface:
      vdom: "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      system_pppoe_interface:
          ac_name: "<your_own_value>"
          auth_type: "auto"
          device: "<your_own_value> (source system.interface.name)"
          dial_on_demand: "enable"
          disc_retry_timeout: "1"
          idle_timeout: "0"
          ipunnumbered: "<your_own_value>"
          ipv6: "enable"
          lcp_echo_interval: "5"
          lcp_max_echo_fails: "3"
          name: "default_name_13"
          padt_retry_timeout: "1"
          password: "<your_own_value>"
          pppoe_unnumbered_negotiate: "enable"
          service_name: "<your_own_value>"
          username: "<your_own_value>"

Inputs

    
vdom:
    default: root
    description:
    - Virtual domain, among those defined previously. A vdom is a virtual instance of
      the FortiGate that can be configured and used as a different unit.
    type: str

state:
    choices:
    - present
    - absent
    description:
    - Indicates whether to create or remove the object.
    required: true
    type: str

enable_log:
    default: false
    description:
    - Enable/Disable logging for task.
    required: false
    type: bool

member_path:
    description:
    - Member attribute path to operate on.
    - Delimited by a slash character if there are more than one attribute.
    - Parameter marked with member_path is legitimate for doing member operation.
    type: str

access_token:
    description:
    - Token-based authentication. Generated from GUI of Fortigate.
    required: false
    type: str

member_state:
    choices:
    - present
    - absent
    description:
    - Add or delete a member under specified attribute path.
    - When member_state is specified, the state option is ignored.
    type: str

system_pppoe_interface:
    default: null
    description:
    - Configure the PPPoE interfaces.
    suboptions:
      ac_name:
        description:
        - PPPoE AC name.
        type: str
      auth_type:
        choices:
        - auto
        - pap
        - chap
        - mschapv1
        - mschapv2
        description:
        - PPP authentication type to use.
        type: str
      device:
        description:
        - Name for the physical interface. Source system.interface.name.
        type: str
      dial_on_demand:
        choices:
        - enable
        - disable
        description:
        - Enable/disable dial on demand to dial the PPPoE interface when packets are routed
          to the PPPoE interface.
        type: str
      disc_retry_timeout:
        description:
        - PPPoE discovery init timeout value in (0-4294967295 sec).
        type: int
      idle_timeout:
        description:
        - PPPoE auto disconnect after idle timeout (0-4294967295 sec).
        type: int
      ipunnumbered:
        description:
        - PPPoE unnumbered IP.
        type: str
      ipv6:
        choices:
        - enable
        - disable
        description:
        - Enable/disable IPv6 Control Protocol (IPv6CP).
        type: str
      lcp_echo_interval:
        description:
        - Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.
        type: int
      lcp_max_echo_fails:
        description:
        - Maximum missed LCP echo messages before disconnect.
        type: int
      name:
        description:
        - Name of the PPPoE interface.
        required: true
        type: str
      padt_retry_timeout:
        description:
        - PPPoE terminate timeout value in (0-4294967295 sec).
        type: int
      password:
        description:
        - Enter the password.
        type: str
      pppoe_unnumbered_negotiate:
        choices:
        - enable
        - disable
        description:
        - Enable/disable PPPoE unnumbered negotiation.
        type: str
      service_name:
        description:
        - PPPoE service name.
        type: str
      username:
        description:
        - User name.
        type: str
    type: dict

Outputs

build:
  description: Build number of the fortigate image
  returned: always
  sample: '1547'
  type: str
http_method:
  description: Last method used to provision the content into FortiGate
  returned: always
  sample: PUT
  type: str
http_status:
  description: Last result given by FortiGate on last operation applied
  returned: always
  sample: '200'
  type: str
mkey:
  description: Master key (id) used in the last call to FortiGate
  returned: success
  sample: id
  type: str
name:
  description: Name of the table used to fulfill the request
  returned: always
  sample: urlfilter
  type: str
path:
  description: Path of the table used to fulfill the request
  returned: always
  sample: webfilter
  type: str
revision:
  description: Internal revision number
  returned: always
  sample: 17.0.2.10658
  type: str
serial:
  description: Serial number of the unit
  returned: always
  sample: FGVMEVYYQT3AB5352
  type: str
status:
  description: Indication of the operation's result
  returned: always
  sample: success
  type: str
vdom:
  description: Virtual domain used
  returned: always
  sample: root
  type: str
version:
  description: Version of the FortiGate
  returned: always
  sample: v5.6.3
  type: str