ieisystem / ieisystem.inmanage / 1.1.1 / module / edit_ipv4 Set ipv4 information | "added in version" 1.0.0 of ieisystem.inmanage" Authors: WangBaoshan (@ieisystem)ieisystem.inmanage.edit_ipv4 (1.1.1) — module
Install with ansible-galaxy collection install ieisystem.inmanage:==1.1.1
collections: - name: ieisystem.inmanage version: 1.1.1
Set ipv4 information on ieisystem Server.
- name: Ipv4 test hosts: inmanage connection: local gather_facts: no vars: inmanage: host: "{{ ansible_ssh_host }}" username: "{{ username }}" password: "{{ password }}" tasks: - name: "Set ipv4 information" ieisystem.inmanage.edit_ipv4: interface_name: "eth0" ipv4_status: "disable" provider: "{{ inmanage }}" - name: "Set ipv4 information" ieisystem.inmanage.edit_ipv4: interface_name: "eth0" ipv4_status: "enable" ipv4_dhcp_enable: "dhcp" provider: "{{ inmanage }}" - name: "Set ipv4 information" ieisystem.inmanage.edit_ipv4: interface_name: "eth0" ipv4_status: "enable" ipv4_dhcp_enable: "static" ipv4_address: "100.2.36.10" ipv4_subnet: "255.255.255.0" ipv4_gateway: "100.2.36.1" provider: "{{ inmanage }}"
host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str provider: description: - A dict object containing connection details. suboptions: host: description: - Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. type: str password: description: - Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_PASSWORD) will be used instead. type: str username: description: - Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str type: dict username: description: - Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable C(ANSIBLE_NET_USERNAME) will be used instead. type: str ipv4_status: choices: - enable - disable description: - Enable or disable IPV4. type: str ipv4_subnet: description: - If DHCP is disabled, specify a static Subnet Mask to be configured for the selected interface. - Required when I(ipv4_dhcp_enable=static). type: str ipv4_address: description: - If DHCP is disabled, specify a static IPv4 address to be configured for the selected interface. - Required when I(ipv4_dhcp_enable=static). type: str ipv4_gateway: description: - If DHCP is disabled, specify a static Default Gateway to be configured for the selected interface. - Required when I(ipv4_dhcp_enable=static). type: str interface_name: choices: - eth0 - eth1 - bond0 description: - Set interface name. Select the LAN interface to be configured. required: true type: str ipv4_dhcp_enable: choices: - dhcp - static description: - Enable 'Enable DHCP' to dynamically configure IPv4 address using Dynamic Host Configuration Protocol (DHCP). type: str
changed: description: Check to see if a change was made on the device. returned: always type: bool message: description: Messages returned after module execution. returned: always type: str state: description: Status after module execution. returned: always type: str