netscaler / netscaler.adc / 2.5.1 / module / authenticationsamlaction Configuration for AAA Saml action resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.authenticationsamlaction (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for AAA Saml action resource.
name: description: - Name for the SAML server profile (action). - Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after SAML profile is created. - '' - 'The following requirement applies only to the Citrix ADC CLI:' - If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my authentication action" or 'my authentication action'). type: str nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str state: choices: - present - absent - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(absent), the resource will be deleted from the NetScaler ADC node. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str audience: description: - Audience for which assertion sent by IdP is applicable. This is typically entity name or url that represents ServiceProvider type: str skewtime: description: - This option specifies the allowed clock skew in number of minutes that Citrix ADC ServiceProvider allows on an incoming assertion. For example, if skewTime is 10, then assertion would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all. type: float logouturl: description: - SingleLogout URL on IdP to which logoutRequest will be sent on Citrix ADC session cleanup. type: str attribute1: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute1. Maximum length of the extracted attribute is 239 bytes. type: str attribute2: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute2. Maximum length of the extracted attribute is 239 bytes. type: str attribute3: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute3. Maximum length of the extracted attribute is 239 bytes. type: str attribute4: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute4. Maximum length of the extracted attribute is 239 bytes. type: str attribute5: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute5. Maximum length of the extracted attribute is 239 bytes. type: str attribute6: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute6. Maximum length of the extracted attribute is 239 bytes. type: str attribute7: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute7. Maximum length of the extracted attribute is 239 bytes. type: str attribute8: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute8. Maximum length of the extracted attribute is 239 bytes. type: str attribute9: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute9. Maximum length of the extracted attribute is 239 bytes. type: str attributes: description: - List of attribute names separated by ',' which needs to be extracted. - Note that preceeding and trailing spaces will be removed. - Attribute name can be 127 bytes and total length of this string should not cross 2047 bytes. - These attributes have multi-value support separated by ',' and stored as key-value pair in AAA session type: str forceauthn: choices: - 'ON' - 'OFF' description: - Option that forces authentication at the Identity Provider (IdP) that receives Citrix ADC's request type: str nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str attribute10: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute10. Maximum length of the extracted attribute is 239 bytes. type: str attribute11: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute11. Maximum length of the extracted attribute is 239 bytes. type: str attribute12: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute12. Maximum length of the extracted attribute is 239 bytes. type: str attribute13: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute13. Maximum length of the extracted attribute is 239 bytes. type: str attribute14: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute14. Maximum length of the extracted attribute is 239 bytes. type: str attribute15: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute15. Maximum length of the extracted attribute is 239 bytes. type: str attribute16: description: - Name of the attribute in SAML Assertion whose value needs to be extracted and stored as attribute16. Maximum length of the extracted attribute is 239 bytes. type: str metadataurl: description: - This URL is used for obtaining saml metadata. Note that it fills samlIdPCertName and samlredirectUrl fields so those fields should not be updated when metadataUrl present type: str samlbinding: choices: - REDIRECT - POST - ARTIFACT description: - This element specifies the transport mechanism of saml messages. type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool statechecks: description: - Boolean expression that will be evaluated to validate HTTP requests on SAML endpoints. - 'Examples:' - set authentication samlaction <actionname> -stateChecks 'HTTP.REQ.HOSTNAME.EQ("https://fqdn.com/")' type: str digestmethod: choices: - SHA1 - SHA256 description: - Algorithm to be used to compute/verify digest for SAML transactions type: str samlacsindex: description: - Index/ID of the metadata entry corresponding to this configuration. type: float signaturealg: choices: - RSA-SHA1 - RSA-SHA256 description: - Algorithm to be used to sign/verify SAML transactions type: str logoutbinding: choices: - REDIRECT - POST description: - This element specifies the transport mechanism of saml logout messages. type: str samltwofactor: choices: - 'ON' - 'OFF' description: - Option to enable second factor after SAML type: str samluserfield: description: - SAML user ID, as given in the SAML assertion. type: str groupnamefield: description: - Name of the tag in assertion that contains user groups. type: str nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str relaystaterule: description: - Boolean expression that will be evaluated to validate the SAML Response. - 'Examples:' - set authentication samlaction <actionname> -relaystateRule 'AAA.LOGIN.RELAYSTATE.EQ("https://fqdn.com/")' - set authentication samlaction <actionname> -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS("https://fqdn.com/")' - set authentication samlaction <actionname> -relaystateRule 'AAA.LOGIN.RELAYSTATE.CONTAINS_ANY("patset_name")' - set authentication samlAction samlsp -relaystateRule 'AAA.LOGIN.RELAYSTATE.REGEX_MATCH(re#http://<regex>.com/#)'. type: str samlissuername: description: - "The name to be used in requests sent from\tCitrix ADC to IdP to uniquely identify\ \ Citrix ADC." type: str sendthumbprint: choices: - 'ON' - 'OFF' description: - Option to send thumbprint instead of x509 certificate in SAML request type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool enforceusername: choices: - 'ON' - 'OFF' description: - Option to choose whether the username that is extracted from SAML assertion can be edited in login page while doing second factor type: str samlidpcertname: description: - Name of the SSL certificate used to verify responses from SAML Identity Provider (IdP). Note that if metadateURL is present then this filed should be empty. type: str samlredirecturl: description: - URL to which users are redirected for authentication. Note that if metadateURL is present then this filed should be empty type: str authnctxclassref: choices: - InternetProtocol - InternetProtocolPassword - Kerberos - MobileOneFactorUnregistered - MobileTwoFactorUnregistered - MobileOneFactorContract - MobileTwoFactorContract - Password - PasswordProtectedTransport - PreviousSession - X509 - PGP - SPKI - XMLDSig - Smartcard - SmartcardPKI - SoftwarePKI - Telephony - NomadTelephony - PersonalTelephony - AuthenticatedTelephony - SecureRemotePassword - TLSClient - TimeSyncToken - Unspecified - Windows description: - This element specifies the authentication class types that are requested from IdP (IdentityProvider). - 'C(InternetProtocol): This is applicable when a principal is authenticated through the use of a provided IP address.' - 'C(InternetProtocolPassword): This is applicable when a principal is authenticated through the use of a provided IP address, in addition to a username/password.' - 'C(Kerberos): This is applicable when the principal has authenticated using a password to a local authentication authority, in order to acquire a C(Kerberos) ticket.' - 'C(MobileOneFactorUnregistered): This indicates authentication of the mobile device without requiring explicit end-user interaction.' - 'C(MobileTwoFactorUnregistered): This indicates two-factor based authentication during mobile customer registration process, such as secure device and user PIN.' - 'C(MobileOneFactorContract): Reflects mobile contract customer registration procedures and a single factor authentication.' - 'C(MobileTwoFactorContract): Reflects mobile contract customer registration procedures and a two-factor based authentication.' - 'C(Password): This class is applicable when a principal authenticates using password over unprotected http session.' - 'C(PasswordProtectedTransport): This class is applicable when a principal authenticates to an authentication authority through the presentation of a password over a protected session.' - 'C(PreviousSession): This class is applicable when a principal had authenticated to an authentication authority at some point in the past using any authentication context.' - 'C(X509): This indicates that the principal authenticated by means of a digital signature where the key was validated as part of an X.509 Public Key Infrastructure.' - 'C(PGP): This indicates that the principal authenticated by means of a digital signature where the key was validated as part of a C(PGP) Public Key Infrastructure.' - 'C(SPKI): This indicates that the principal authenticated by means of a digital signature where the key was validated via an C(SPKI) Infrastructure.' - 'C(XMLDSig): This indicates that the principal authenticated by means of a digital signature according to the processing rules specified in the XML Digital Signature specification.' - 'C(Smartcard): This indicates that the principal has authenticated using smartcard.' - 'C(SmartcardPKI): This class is applicable when a principal authenticates to an authentication authority through a two-factor authentication mechanism using a smartcard with enclosed private key and a PIN.' - 'C(SoftwarePKI): This class is applicable when a principal uses an X.509 certificate stored in software to authenticate to the authentication authority.' - 'C(Telephony): This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone number, transported via a telephony protocol such as ADSL.' - 'C(NomadTelephony): Indicates that the principal is "roaming" and authenticates via the means of the line number, a user suffix, and a password element.' - 'C(PersonalTelephony): This class is used to indicate that the principal authenticated via the provision of a fixed-line telephone.' - 'C(AuthenticatedTelephony): Indicates that the principal authenticated via the means of the line number, a user suffix, and a password element.' - 'C(SecureRemotePassword): This class is applicable when the authentication was performed by means of Secure Remote C(Password).' - 'C(TLSClient): This class indicates that the principal authenticated by means of a client certificate, secured with the SSL/TLS transport.' - 'C(TimeSyncToken): This is applicable when a principal authenticates through a time synchronization token.' - 'C(Unspecified): This indicates that the authentication was performed by unspecified means.' - 'C(Windows): This indicates that C(Windows) integrated authentication is utilized for authentication.' elements: str type: list nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc storesamlresponse: choices: - 'ON' - 'OFF' description: - Option to store entire SAML Response through the life of user session. type: str samlsigningcertname: description: - Name of the SSL certificate to sign requests from ServiceProvider (SP) to Identity Provider (IdP). type: str requestedauthncontext: choices: - exact - minimum - maximum - better description: - This element specifies the authentication context requirements of authentication statements returned in the response. type: str customauthnctxclassref: description: - This element specifies the custom authentication class reference to be sent as a part of the Authentication Request that is sent by the SP to SAML IDP. The input string must be the body of the authentication class being requested. - 'Input format: Alphanumeric string or URL specifying the body of the Request.If more than one string has to be provided, then the same can be done by specifying the classes as a string of comma separated values.' - 'Example input: set authentication samlaction samlact1 -customAuthnCtxClassRef http://www.class1.com/LoA1,http://www.class2.com/LoA2' type: str metadatarefreshinterval: description: - Interval in minutes for fetching metadata from specified metadata URL type: float defaultauthenticationgroup: description: - This is the default group that is chosen when the authentication succeeds in addition to extracted groups. type: str samlrejectunsignedassertion: choices: - 'ON' - 'OFF' - STRICT description: - Reject unsigned SAML assertions. C(ON) option results in rejection of Assertion that is received without signature. C(STRICT) option ensures that both Response and Assertion are signed. C(OFF) allows unsigned Assertions. type: str artifactresolutionserviceurl: description: - URL of the Artifact Resolution Service on IdP to which Citrix ADC will post artifact to get actual SAML token. type: str attributeconsumingserviceindex: description: - Index/ID of the attribute specification at Identity Provider (IdP). IdP will locate attributes requested by SP using this index and send those attributes in Assertion type: float
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list