netscaler / netscaler.adc / 2.5.1 / module / bridgegroup Configuration for bridge group resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.bridgegroup (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for bridge group resource.
id: description: - An integer that uniquely identifies the bridge group. type: float nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str state: choices: - present - absent - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(absent), the resource will be deleted from the NetScaler ADC node. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool dynamicrouting: choices: - ENABLED - DISABLED description: - Enable dynamic routing for this bridgegroup. type: str nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc ipv6dynamicrouting: choices: - ENABLED - DISABLED description: - 'Enable all IPv6 dynamic routing protocols on all VLANs bound to this bridgegroup. Note: For the C(ENABLED) setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line.' type: str bridgegroup_nsip_binding: description: Bindings for bridgegroup_nsip_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict bridgegroup_vlan_binding: description: Bindings for bridgegroup_vlan_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict bridgegroup_nsip6_binding: description: Bindings for bridgegroup_nsip6_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list