netscaler / netscaler.adc / 2.5.1 / module / clusternodegroup Configuration for Node group object type resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.clusternodegroup (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for Node group object type resource.
name: description: - Name of the nodegroup. The name uniquely identifies the nodegroup on the cluster. type: str nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str state: choices: - present - absent - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(absent), the resource will be deleted from the NetScaler ADC node. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str sticky: choices: - 'YES' - 'NO' description: - Only one node can be bound to nodegroup with this option enabled. It specifies whether to prempt the traffic for the entities bound to nodegroup when owner node goes down and rejoins the cluster. - ' * Enabled - When owner node goes down, backup node will become the owner node and takes the traffic for the entities bound to the nodegroup. When bound node rejoins the cluster, traffic for the entities bound to nodegroup will not be steered back to this bound node. Current owner will have the ownership till it goes down.' - ' * Disabled - When one of the nodes goes down, a non-nodegroup cluster node is picked up and acts as part of the nodegroup. When the original node of the nodegroup comes up, the backup node will be replaced.' type: str strict: choices: - 'YES' - 'NO' description: - Specifies whether cluster nodes, that are not part of the nodegroup, will be used as backup for the nodegroup. - ' * Enabled - When one of the nodes goes down, no other cluster node is picked up to replace it. When the node comes up, it will continue being part of the nodegroup.' - ' * Disabled - When one of the nodes goes down, a non-nodegroup cluster node is picked up and acts as part of the nodegroup. When the original node of the nodegroup comes up, the backup node will be replaced.' type: str api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str priority: description: - Priority of Nodegroup. This priority is used for all the nodes bound to the nodegroup for Nodegroup selection type: float nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc clusternodegroup_service_binding: description: Bindings for clusternodegroup_service_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_gslbsite_binding: description: Bindings for clusternodegroup_gslbsite_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_crvserver_binding: description: Bindings for clusternodegroup_crvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_csvserver_binding: description: Bindings for clusternodegroup_csvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_lbvserver_binding: description: Bindings for clusternodegroup_lbvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_vpnvserver_binding: description: Bindings for clusternodegroup_vpnvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_clusternode_binding: description: Bindings for clusternodegroup_clusternode_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_gslbvserver_binding: description: Bindings for clusternodegroup_gslbvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_streamidentifier_binding: description: Bindings for clusternodegroup_streamidentifier_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_nslimitidentifier_binding: description: Bindings for clusternodegroup_nslimitidentifier_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict clusternodegroup_authenticationvserver_binding: description: Bindings for clusternodegroup_authenticationvserver_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list