netscaler / netscaler.adc / 2.5.1 / module / nsencryptionkey Configuration for encryption key resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.nsencryptionkey (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for encryption key resource.
iv: description: - 'The initalization voector (IV) for a block cipher, one block of data used to initialize the encryption. The best practice is to not specify an IV, in which case a new random IV will be generated for each encryption. The format must be iv_data or keyid_iv_data to include the generated IV in the encrypted data. The IV should only be specified if it cannot be included in the encrypted data. The IV length is the cipher block size:' - ' RC4 - not used (error if IV is specified)' - ' DES - 8 bytes (all modes)' - ' DES3 - 8 bytes (all modes)' - ' AES128 - 16 bytes (all modes)' - ' AES192 - 16 bytes (all modes)' - ' AES256 - 16 bytes (all modes)' type: str name: description: - 'Key name. This follows the same syntax rules as other expression entity names:' - ' It must begin with an alpha character (A-Z or a-z) or an underscore (_).' - ' The rest of the characters must be alpha, numeric (0-9) or underscores.' - ' It cannot be re or xp (reserved for regular and XPath expressions).' - ' It cannot be an expression reserved word (e.g. SYS or HTTP).' - ' It cannot be used for an existing expression object (HTTP callout, patset, dataset, stringmap, or named expression).' type: str nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str state: choices: - present - absent - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(absent), the resource will be deleted from the NetScaler ADC node. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str method: choices: - NONE - RC4 - DES3 - AES128 - AES192 - AES256 - DES - DES-CBC - DES-CFB - DES-OFB - DES-ECB - DES3-CBC - DES3-CFB - DES3-OFB - DES3-ECB - AES128-CBC - AES128-CFB - AES128-OFB - AES128-ECB - AES192-CBC - AES192-CFB - AES192-OFB - AES192-ECB - AES256-CBC - AES256-CFB - AES256-OFB - AES256-ECB description: - Cipher method to be used to encrypt and decrypt content. - ' C(NONE) - no encryption or decryption is performed The output of ENCRYPT() and DECRYPT() is the same as the input.' - ' C(RC4) - the C(RC4) stream cipher with a 128 bit (16 byte) key; C(RC4) is now considered insecure and should only be used if required by existing applciations.' - ' C(DES)[-<mode>] - the Data Encryption Standard (C(DES)) block cipher with a 64-bit (8 byte) key, with 56 data bits and 8 parity bits. C(DES) is considered less secure than C(DES3) or AES so it should only be used if required by an existing applicastion. The optional mode is described below; C(DES) without a mode is equivalent to C(DES)-CBC.' - ' C(DES3)[-<mode>] - the Triple Data Encryption Standard (C(DES)) block cipher with a 192-bit (24 byte) key. The optional mode is described below; C(DES3) without a mode is equivalent to C(DES3)-CBC.' - ' AES<keysize>[-<mode>] - the Advanced Encryption Standard block cipher, available with 128 bit (16 byte), 192 bit (24 byte), and 256 bit (32 byte) keys. The optional mode is described below; AES<keysize> without a mode is equivalent to AES<keysize>-CBC.' - '' - For a block cipher, the <mode> specifies how multiple blocks of plaintext are encrypted and how the Initialization Vector (IV) is used. Choices are - ' CBC (Cipher Block Chaining) - Each block of plaintext is XORed with the previous ciphertext block, or IV for the first block, before being encrypted. Padding is required if the plaintext is not a multiple of the cipher block size.' - ' CFB (Cipher Feedback) - The previous ciphertext block, or the IV for the first block, is encrypted and the output is XORed with the current plaintext block to create the current ciphertext block. The 128-bit version of CFB is provided. Padding is not required.' - ' OFB (Output Feedback) - A keystream is generated by applying the cipher successfully to the IV and XORing the keystream blocks with the plaintext. Padding is not required.' - ' ECB (Electronic Codebook) - Each block of plaintext is independently encrypted. An IV is not used. Padding is required. This mode is considered less secure than the other modes because the same plaintext always produces the same encrypted text and should only be used if required by an existing application.' type: str comment: description: - Comments associated with this encryption key. type: str padding: choices: - 'OFF' - 'ON' description: - 'Enables or disables the padding of plaintext to meet the block size requirements of block ciphers:' - ' C(ON) - For encryption, PKCS5/7 padding is used, which appends n bytes of value n on the end of the plaintext to bring it to the cipher block lnegth. If the plaintext length is alraady a multiple of the block length, an additional block with bytes of value block_length will be added. For decryption, ISO 10126 padding is accepted, which expects the last byte of the block to be the number of added pad bytes. Note that this accepts PKCS5/7 padding, as well as ANSI_X923 padding. Padding C(ON) is the default for the ECB and CBD modes.' - ' C(OFF) - No padding. An Undef error will occur with the ECB or CBC modes if the plaintext length is not a multitple of the cipher block size. This can be used with the CFB and OFB modes, and with the ECB and CBC modes if the plaintext will always be an integral number of blocks, or if custom padding is implemented using a policy extension function. Padding OFf is the default for CFB and OFB modes.' type: str api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str keyvalue: description: - 'The hex-encoded key value. The length is determined by the cipher method:' - ' RC4 - 16 bytes' - ' DES - 8 bytes (all modes)' - ' DES3 - 24 bytes (all modes)' - ' AES128 - 16 bytes (all modes)' - ' AES192 - 24 bytes (all modes)' - ' AES256 - 32 bytes (all modes)' - Note that the keyValue will be encrypted when it it is saved. - '' - There is a special key value AUTO which generates a new random key for the specified method. This kind of key is - intended for use cases where the NetScaler both encrypts and decrypts the same data, such an HTTP header. type: str nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list