netscaler / netscaler.adc / 2.5.1 / module / nsip Configuration for ip resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.nsip (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for ip resource.
--- - name: Sample Playbook hosts: localhost gather_facts: false tasks: - name: Sample Task | nsip delegate_to: localhost netscaler.adc.nsip: state: present ipaddress: 1.1.1.1 netmask: 255.255.255.192 type: VIP - name: Sample Task | nsip | 2 delegate_to: localhost netscaler.adc.nsip: state: present ipaddress: 192.188.1.1 netmask: 255.255.255.0 vserver: DISABLED dynamicrouting: ENABLED - name: Sample Task | nsip | 3 delegate_to: localhost netscaler.adc.nsip: state: present ipaddress: 192.179.1.1 netmask: 255.255.255.255 type: VIP arp: DISABLED snmp: DISABLED hostroute: ENABLED hostrtgw: 0.0.0.0 - name: Sample Task | nsip | 4 delegate_to: localhost netscaler.adc.nsip: state: present ipaddress: 192.188.1.2 netmask: 255.255.0.0 vserver: DISABLED
td: description: - Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. TD id 4095 is used reserved for LSN use type: float arp: choices: - ENABLED - DISABLED description: - Respond to ARP requests for this IP address. type: str bgp: choices: - ENABLED - DISABLED description: - Use this option to enable or disable BGP on this IP address for the entity. type: str ftp: choices: - ENABLED - DISABLED description: - Allow File Transfer Protocol (FTP) access to this IP address. type: str gui: choices: - ENABLED - SECUREONLY - DISABLED description: - Allow graphical user interface (GUI) access to this IP address. type: str rip: choices: - ENABLED - DISABLED description: - Use this option to enable or disable RIP on this IP address for the entity. type: str ssh: choices: - ENABLED - DISABLED description: - Allow secure shell (SSH) access to this IP address. type: str tag: description: - Tag value for the network/host route associated with this IP. type: float icmp: choices: - ENABLED - DISABLED description: - Respond to ICMP requests for this IP address. type: str nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str ospf: choices: - ENABLED - DISABLED description: - Use this option to enable or disable OSPF on this IP address for the entity. type: str snmp: choices: - ENABLED - DISABLED description: - Allow Simple Network Management Protocol (SNMP) access to this IP address. type: str type: choices: - SNIP - VIP - NSIP - HostIP - GSLBsiteIP - CLIP description: - 'Type of the IP address to create on the Citrix ADC. Cannot be changed after the IP address is created. The following are the different types of Citrix ADC owned IP addresses:' - '* A Subnet IP (C(SNIP)) address is used by the Citrix ADC to communicate with the servers. The Citrix ADC also uses the subnet IP address when generating its own packets, such as packets related to dynamic routing protocols, or to send monitor probes to check the health of the servers.' - '* A Virtual IP (C(VIP)) address is the IP address associated with a virtual server. It is the IP address to which clients connect. An appliance managing a wide range of traffic may have many VIPs configured. Some of the attributes of the C(VIP) address are customized to meet the requirements of the virtual server.' - '* A GSLB site IP (GSLBIP) address is associated with a GSLB site. It is not mandatory to specify a GSLBIP address when you initially configure the Citrix ADC. A GSLBIP address is used only when you create a GSLB site.' - '* A Cluster IP (C(CLIP)) address is the management address of the cluster. All cluster configurations must be performed by accessing the cluster through this IP address.' type: str vrid: description: - A positive integer that uniquely identifies a VMAC address for binding to this VIP address. This binding is used to set up Citrix ADCs in an active-active configuration using VRRP. type: float state: choices: - present - absent - enabled - disabled - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(absent), the resource will be deleted from the NetScaler ADC node. - When C(enabled), the resource will be enabled on the NetScaler ADC node. - When C(disabled), the resource will be disabled on the NetScaler ADC node. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str metric: description: - Integer value to add to or subtract from the cost of the route advertised for the VIP address. type: int telnet: choices: - ENABLED - DISABLED description: - Allow Telnet access to this IP address. type: str netmask: description: - Subnet mask associated with the IP address. type: str vserver: choices: - ENABLED - DISABLED description: - Use this option to set (enable or disable) the virtual server attribute for this IP address. type: str api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str arpowner: description: - The arp owner in a Cluster for this IP address. It can vary from 0 to 31. type: float hostrtgw: description: - IP address of the gateway of the route for this VIP address. type: str ospfarea: description: - ID of the area in which the type1 link-state advertisements (LSAs) are to be advertised for this virtual IP (VIP) address by the OSPF protocol running on the Citrix ADC. When this parameter is not set, the VIP is advertised on all areas. type: float hostroute: choices: - ENABLED - DISABLED description: - Option to push the VIP to ZebOS routing table for Kernel route redistribution through dynamic routing protocols type: str ipaddress: description: - IPv4 address to create on the Citrix ADC. Cannot be changed after the IP address is created. type: str ownernode: description: - The owner node in a Cluster for this IP address. Owner node can vary from 0 to 31. If ownernode is not specified then the IP is treated as Striped IP. type: float mgmtaccess: choices: - ENABLED - DISABLED description: - Allow access to management applications on this IP address. type: str nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str arpresponse: choices: - NONE - ONE_VSERVER - ALL_VSERVERS description: - 'Respond to ARP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows:' - '' - '* C(NONE) - The Citrix ADC responds to any ARP request for the VIP address, irrespective of the states of the virtual servers associated with the address.' - '* ONE VSERVER - The Citrix ADC responds to any ARP request for the VIP address if at least one of the associated virtual servers is in UP state.' - '* ALL VSERVER - The Citrix ADC responds to any ARP request for the VIP address if all of the associated virtual servers are in UP state.' type: str ospflsatype: choices: - TYPE1 - TYPE5 description: - Type of LSAs to be used by the OSPF protocol, running on the Citrix ADC, for advertising the route for this VIP address. type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool decrementttl: choices: - ENABLED - DISABLED description: - Decrement TTL by 1 when C(ENABLED).This setting is applicable only for UDP traffic. type: str icmpresponse: choices: - NONE - ONE_VSERVER - ALL_VSERVERS - VSVR_CNTRLD description: - 'Respond to ICMP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows:' - '* C(NONE) - The Citrix ADC responds to any ICMP request for the VIP address, irrespective of the states of the virtual servers associated with the address.' - '* ONE VSERVER - The Citrix ADC responds to any ICMP request for the VIP address if at least one of the associated virtual servers is in UP state.' - '* ALL VSERVER - The Citrix ADC responds to any ICMP request for the VIP address if all of the associated virtual servers are in UP state.' - '* C(VSVR_CNTRLD) - The behavior depends on the ICMP VSERVER RESPONSE setting on all the associated virtual servers.' - '' - 'The following settings can be made for the ICMP VSERVER RESPONSE parameter on a virtual server:' - '* If you set ICMP VSERVER RESPONSE to PASSIVE on all virtual servers, Citrix ADC always responds.' - '* If you set ICMP VSERVER RESPONSE to ACTIVE on all virtual servers, Citrix ADC responds if even one virtual server is UP.' - '* When you set ICMP VSERVER RESPONSE to ACTIVE on some and PASSIVE on others, Citrix ADC responds if even one virtual server set to ACTIVE is UP.' type: str networkroute: choices: - ENABLED - DISABLED description: - Option to push the SNIP subnet to ZebOS routing table for Kernel route redistribution through dynamic routing protocol. type: str dynamicrouting: choices: - ENABLED - DISABLED description: - Allow dynamic routing on this IP address. Specific to Subnet IP (SNIP) address. type: str mptcpadvertise: choices: - 'YES' - 'NO' description: - If enabled, this IP will be advertised by Citrix ADC to MPTCP enabled clients as part of ADD_ADDR option. type: str nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str restrictaccess: choices: - ENABLED - DISABLED description: - Block access to nonmanagement applications on this IP. This option is applicable for MIPs, SNIPs, and NSIP, and is disabled by default. Nonmanagement applications can run on the underlying Citrix ADC Free BSD operating system. type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool vserverrhilevel: choices: - ONE_VSERVER - ALL_VSERVERS - NONE - VSVR_CNTRLD description: - Advertise the route for the Virtual IP (VIP) address on the basis of the state of the virtual servers associated with that VIP. - '* C(NONE) - Advertise the route for the VIP address, regardless of the state of the virtual servers associated with the address.' - '* ONE VSERVER - Advertise the route for the VIP address if at least one of the associated virtual servers is in UP state.' - '* ALL VSERVER - Advertise the route for the VIP address if all of the associated virtual servers are in UP state.' - '* C(VSVR_CNTRLD) - Advertise the route for the VIP address according to the RHIstate (RHI STATE) parameter setting on all the associated virtual servers of the VIP address along with their states.' - '' - 'When Vserver RHI Level (RHI) parameter is set to C(VSVR_CNTRLD), the following are different RHI behaviors for the VIP address on the basis of RHIstate (RHI STATE) settings on the virtual servers associated with the VIP address:' - ' * If you set RHI STATE to PASSIVE on all virtual servers, the Citrix ADC always advertises the route for the VIP address.' - ' * If you set RHI STATE to ACTIVE on all virtual servers, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state.' - ' *If you set RHI STATE to ACTIVE on some and PASSIVE on others, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state.' type: str nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc ownerdownresponse: choices: - 'YES' - 'NO' description: - in cluster system, if the owner node is down, whether should it respond to icmp/arp type: str advertiseondefaultpartition: choices: - ENABLED - DISABLED description: - Advertise VIPs from Shared VLAN on Default Partition. type: str
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list