netscaler.adc.rnat6 (2.5.1) — module

Install collection

Install with ansible-galaxy collection install netscaler.adc:==2.5.1

Add to requirements.yml

  collections:
    - name: netscaler.adc
      version: 2.5.1

Description

Configuration for IPv6 RNAT configured route resource.

Inputs

    
td:
    description:
    - Integer value that uniquely identifies the traffic domain in which you want to configure
      the entity. If you do not specify an ID, the entity becomes part of the default
      traffic domain, which has an ID of 0.
    type: float

name:
    description:
    - Name for the RNAT6 rule. Must begin with a letter, number, or the underscore character
      (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#),
      space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot
      be changed after the rule is created. Choose a name that helps identify the RNAT6
      rule.
    type: str

nsip:
    description:
    - The ip address of the NetScaler ADC appliance where the nitro API calls will be
      made.
    - The port can be specified with the colon (:). E.g. 192.168.1.1:555.
    required: true
    type: str

state:
    choices:
    - present
    - unset
    default: present
    description:
    - The state of the resource being configured by the module on the NetScaler ADC node.
    - When C(present), the resource will be added/updated configured according to the
      module's parameters.
    - When C(unset), the resource will be unset on the NetScaler ADC node.
    type: str

network:
    description:
    - IPv6 address of the network on whose traffic you want the Citrix ADC to do RNAT
      processing.
    type: str

acl6name:
    description:
    - Name of any configured ACL6 whose action is ALLOW. The rule of the ACL6 is used
      as an RNAT6 rule.
    type: str

api_path:
    default: nitro/v1/config
    description:
    - Base NITRO API path.
    - Define only in case of an ADM service proxy call
    type: str

nitro_pass:
    description:
    - The password with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

nitro_user:
    description:
    - The username with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

ownergroup:
    description:
    - The owner node group in a Cluster for this rnat rule.
    type: str

save_config:
    default: false
    description:
    - If C(true) the module will save the configuration on the NetScaler ADC node if it
      makes any changes.
    - The module will not save the configuration on the NetScaler ADC node if it made
      no changes.
    type: bool

redirectport:
    description:
    - Port number to which the IPv6 packets are redirected. Applicable to TCP and UDP
      protocols.
    type: int

nitro_protocol:
    choices:
    - http
    - https
    default: https
    description:
    - Which protocol to use when accessing the nitro API objects.
    type: str

validate_certs:
    default: true
    description:
    - If C(false), SSL certificates will not be validated. This should only be used on
      personally controlled sites using self-signed certificates.
    required: false
    type: bool

nitro_auth_token:
    description:
    - The authentication token provided by a login operation.
    type: str
    version_added: 2.6.0
    version_added_collection: netscaler.adc

srcippersistency:
    choices:
    - ENABLED
    - DISABLED
    description:
    - Enable source ip persistency, which enables the Citrix ADC to use the RNAT ips using
      source ip.
    type: str

rnat6_nsip6_binding:
    description: Bindings for rnat6_nsip6_binding resource
    suboptions:
      binding_members:
        default: []
        description: List of binding members
        elements: dict
        type: list
      mode:
        choices:
        - desired
        - bind
        - unbind
        default: desired
        description:
        - The mode in which to configure the bindings.
        - If mode is set to C(desired), the bindings will be added or removed from the
          target NetScaler ADCs as necessary to match the bindings specified in the state.
        - If mode is set to C(bind), the specified bindings will be added to the resource.
          The existing bindings in the target ADCs will not be modified.
        - If mode is set to C(unbind), the specified bindings will be removed from the
          resource. The existing bindings in the target ADCs will not be modified.
        type: str
    type: dict

Outputs

changed:
  description: Indicates if any change is made by the module
  returned: always
  sample: true
  type: bool
diff:
  description: Dictionary of before and after changes
  returned: always
  sample:
    after:
      key2: pqr
    before:
      key1: xyz
    prepared: changes done
  type: dict
diff_list:
  description: List of differences between the actual configured object and the configuration
    specified in the module
  returned: when changed
  sample:
  - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>)
    PQR'
  type: list
failed:
  description: Indicates if the module failed or not
  returned: always
  sample: false
  type: bool
loglines:
  description: list of logged messages by the module
  returned: always
  sample:
  - message 1
  - message 2
  type: list