netscaler.adc.snmpmanager (2.5.1) — module

Install collection

Install with ansible-galaxy collection install netscaler.adc:==2.5.1

Add to requirements.yml

  collections:
    - name: netscaler.adc
      version: 2.5.1

Description

Configuration for manager resource.

Inputs

    
nsip:
    description:
    - The ip address of the NetScaler ADC appliance where the nitro API calls will be
      made.
    - The port can be specified with the colon (:). E.g. 192.168.1.1:555.
    required: true
    type: str

state:
    choices:
    - present
    - absent
    - unset
    default: present
    description:
    - The state of the resource being configured by the module on the NetScaler ADC node.
    - When C(present), the resource will be added/updated configured according to the
      module's parameters.
    - When C(absent), the resource will be deleted from the NetScaler ADC node.
    - When C(unset), the resource will be unset on the NetScaler ADC node.
    type: str

netmask:
    description:
    - Subnet mask associated with an IPv4 network address. If the IP address specifies
      the address or host name of a specific host, accept the default value of 255.255.255.255.
    type: str

api_path:
    default: nitro/v1/config
    description:
    - Base NITRO API path.
    - Define only in case of an ADM service proxy call
    type: str

ipaddress:
    description:
    - 'IP address of the SNMP manager. Can be an IPv4 or IPv6 address. You can instead
      specify an IPv4 network address or IPv6 network prefix if you want the Citrix ADC
      to respond to SNMP queries from any device on the specified network. Alternatively,
      instead of an IPv4 address, you can specify a host name that has been assigned to
      an SNMP manager. If you do so, you must add a DNS name server that resolves the
      host name of the SNMP manager to its IP address. '
    - 'Note: The Citrix ADC does not support host names for SNMP managers that have IPv6
      addresses.'
    type: str

nitro_pass:
    description:
    - The password with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

nitro_user:
    description:
    - The username with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

save_config:
    default: false
    description:
    - If C(true) the module will save the configuration on the NetScaler ADC node if it
      makes any changes.
    - The module will not save the configuration on the NetScaler ADC node if it made
      no changes.
    type: bool

nitro_protocol:
    choices:
    - http
    - https
    default: https
    description:
    - Which protocol to use when accessing the nitro API objects.
    type: str

validate_certs:
    default: true
    description:
    - If C(false), SSL certificates will not be validated. This should only be used on
      personally controlled sites using self-signed certificates.
    required: false
    type: bool

nitro_auth_token:
    description:
    - The authentication token provided by a login operation.
    type: str
    version_added: 2.6.0
    version_added_collection: netscaler.adc

domainresolveretry:
    description:
    - Amount of time, in seconds, for which the Citrix ADC waits before sending another
      DNS query to resolve the host name of the SNMP manager if the last query failed.
      This parameter is valid for host-name based SNMP managers only. After a query succeeds,
      the TTL determines the wait time. The minimum and default value is 5.
    type: int

Outputs

changed:
  description: Indicates if any change is made by the module
  returned: always
  sample: true
  type: bool
diff:
  description: Dictionary of before and after changes
  returned: always
  sample:
    after:
      key2: pqr
    before:
      key1: xyz
    prepared: changes done
  type: dict
diff_list:
  description: List of differences between the actual configured object and the configuration
    specified in the module
  returned: when changed
  sample:
  - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>)
    PQR'
  type: list
failed:
  description: Indicates if the module failed or not
  returned: always
  sample: false
  type: bool
loglines:
  description: list of logged messages by the module
  returned: always
  sample:
  - message 1
  - message 2
  type: list