netscaler / netscaler.adc / 2.5.1 / module / sslservice Configuration for SSL service resource. | "added in version" 2.0.0 of netscaler.adc" Authors: Sumanth Lingappa (@sumanth-lingappa) preview | supported by communitynetscaler.adc.sslservice (2.5.1) — module
Install with ansible-galaxy collection install netscaler.adc:==2.5.1
collections: - name: netscaler.adc version: 2.5.1
Configuration for SSL service resource.
--- - name: Sample Playbook hosts: localhost gather_facts: false tasks: - name: Sample Task | sslservice delegate_to: localhost netscaler.adc.sslservice: state: present servicename: nsrnatsip-127.0.0.1-5061 ersa: ENABLED sessreuse: DISABLED ssl3: DISABLED tls1: DISABLED tls11: DISABLED dtls1: DISABLED
dh: choices: - ENABLED - DISABLED description: - State of Diffie-Hellman (DH) key exchange. This parameter is not applicable when configuring a backend service. type: str ersa: choices: - ENABLED - DISABLED description: - State of Ephemeral RSA (eRSA) key exchange. Ephemeral RSA allows clients that support only export ciphers to communicate with the secure server even if the server certificate does not support export clients. The ephemeral RSA key is automatically generated when you bind an export cipher to an SSL or TCP-based SSL virtual server or service. When you remove the export cipher, the eRSA key is not deleted. It is reused at a later date when another export cipher is bound to an SSL or TCP-based SSL virtual server or service. The eRSA key is deleted when the appliance restarts. - This parameter is not applicable when configuring a backend service. type: str nsip: description: - The ip address of the NetScaler ADC appliance where the nitro API calls will be made. - The port can be specified with the colon (:). E.g. 192.168.1.1:555. required: true type: str ssl2: choices: - ENABLED - DISABLED description: - State of SSLv2 protocol support for the SSL service. - This parameter is not applicable when configuring a backend service. type: str ssl3: choices: - ENABLED - DISABLED description: - State of SSLv3 protocol support for the SSL service. - 'Note: On platforms with SSL acceleration chips, if the SSL chip does not support SSLv3, this parameter cannot be set to C(ENABLED).' type: str tls1: choices: - ENABLED - DISABLED description: - State of TLSv1.0 protocol support for the SSL service. type: str dtls1: choices: - ENABLED - DISABLED description: - State of DTLSv1.0 protocol support for the SSL service. type: str state: choices: - present - unset default: present description: - The state of the resource being configured by the module on the NetScaler ADC node. - When C(present), the resource will be added/updated configured according to the module's parameters. - When C(unset), the resource will be unset on the NetScaler ADC node. type: str tls11: choices: - ENABLED - DISABLED description: - State of TLSv1.1 protocol support for the SSL service. type: str tls12: choices: - ENABLED - DISABLED description: - State of TLSv1.2 protocol support for the SSL service. type: str tls13: choices: - ENABLED - DISABLED description: - State of TLSv1.3 protocol support for the SSL service. type: str dhfile: description: - Name for and, optionally, path to the PEM-format DH parameter file to be installed. /nsconfig/ssl/ is the default path. This parameter is not applicable when configuring a backend service. type: str dtls12: choices: - ENABLED - DISABLED description: - State of DTLSv1.2 protocol support for the SSL service. type: str dhcount: description: - Number of interactions, between the client and the Citrix ADC, after which the DH private-public pair is regenerated. A value of zero (0) specifies refresh every time. This parameter is not applicable when configuring a backend service. Allowed DH count values are 0 and >= 500. type: float api_path: default: nitro/v1/config description: - Base NITRO API path. - Define only in case of an ADM service proxy call type: str sslv2url: description: - URL of the page to which to redirect the client in case of a protocol version mismatch. Typically, this page has a clear explanation of the error or an alternative location that the transaction can continue from. - This parameter is not applicable when configuring a backend service. type: str cipherurl: description: - URL of the page to which to redirect the client in case of a cipher mismatch. Typically, this page has a clear explanation of the error or an alternative location that the transaction can continue from. - This parameter is not applicable when configuring a backend service. type: str ersacount: description: - Refresh count for regeneration of RSA public-key and private-key pair. Zero (0) specifies infinite usage (no refresh). - This parameter is not applicable when configuring a backend service. type: float sessreuse: choices: - ENABLED - DISABLED description: - State of session reuse. Establishing the initial handshake requires CPU-intensive public key encryption operations. With the C(ENABLED) setting, session key exchange is avoided for session resumption requests received from the client. type: str snienable: choices: - ENABLED - DISABLED description: - State of the Server Name Indication (SNI) feature on the virtual server and service-based offload. SNI helps to enable SSL encryption on multiple domains on a single virtual server or service if the domains are controlled by the same organization and share the same second-level domain name. For example, *.sports.net can be used to secure domains such as login.sports.net and help.sports.net. type: str clientauth: choices: - ENABLED - DISABLED description: - State of client authentication. In service-based SSL offload, the service terminates the SSL handshake if the SSL client does not provide a valid certificate. - This parameter is not applicable when configuring a backend service. type: str clientcert: choices: - Mandatory - Optional description: - Type of client authentication. If this parameter is set to MANDATORY, the appliance terminates the SSL handshake if the SSL client does not provide a valid certificate. With the OPTIONAL setting, the appliance requests a certificate from the SSL clients but proceeds with the SSL transaction even if the client presents an invalid certificate. - This parameter is not applicable when configuring a backend SSL service. - 'Caution: Define proper access control policies before changing this setting to C(Optional).' type: str commonname: description: - Name to be checked against the CommonName (CN) field in the server certificate bound to the SSL server type: str nitro_pass: description: - The password with which to authenticate to the NetScaler ADC node. required: false type: str nitro_user: description: - The username with which to authenticate to the NetScaler ADC node. required: false type: str serverauth: choices: - ENABLED - DISABLED description: - State of server authentication support for the SSL service. type: str sslprofile: description: - Name of the SSL profile that contains SSL settings for the service. type: str save_config: default: false description: - If C(true) the module will save the configuration on the NetScaler ADC node if it makes any changes. - The module will not save the configuration on the NetScaler ADC node if it made no changes. type: bool servicename: description: - Name of the SSL service. type: str sesstimeout: description: - Time, in seconds, for which to keep the session active. Any session resumption request received after the timeout period will require a fresh SSL handshake and establishment of a new SSL session. type: float sslredirect: choices: - ENABLED - DISABLED description: - State of HTTPS redirects for the SSL service. - '' - For an SSL session, if the client browser receives a redirect message, the browser tries to connect to the new location. However, the secure SSL session breaks if the object has moved from a secure site (https://) to an unsecure site (http://). Typically, a warning message appears on the screen, prompting the user to continue or disconnect. - If SSL Redirect is C(ENABLED), the redirect message is automatically converted from http:// to https:// and the SSL session does not break. - '' - This parameter is not applicable when configuring a backend service. type: str ocspstapling: choices: - ENABLED - DISABLED description: - 'State of OCSP stapling support on the SSL virtual server. Supported only if the protocol used is higher than SSLv3. Possible values:' - 'C(ENABLED): The appliance sends a request to the OCSP responder to check the status of the server certificate and caches the response for the specified time. If the response is valid at the time of SSL handshake with the client, the OCSP-based server certificate status is sent to the client during the handshake.' - 'C(DISABLED): The appliance does not check the status of the server certificate.' type: str sslv2redirect: choices: - ENABLED - DISABLED description: - State of SSLv2 Redirect. If this parameter is set to C(ENABLED), you can configure an SSL virtual server or service to display meaningful error messages if the SSL handshake fails because of a protocol version mismatch between the virtual server or service and the client. - This parameter is not applicable when configuring a backend service. type: str cipherredirect: choices: - ENABLED - DISABLED description: - State of Cipher Redirect. If this parameter is set to C(ENABLED), you can configure an SSL virtual server or service to display meaningful error messages if the SSL handshake fails because of a cipher mismatch between the virtual server or service and the client. - This parameter is not applicable when configuring a backend service. type: str nitro_protocol: choices: - http - https default: https description: - Which protocol to use when accessing the nitro API objects. type: str pushenctrigger: choices: - Always - Merge - Ignore - Timer description: - 'Trigger encryption on the basis of the PUSH flag value. Available settings function as follows:' - '* ALWAYS - Any PUSH packet triggers encryption.' - '* IGNORE - C(Ignore) PUSH packet for triggering encryption.' - '* MERGE - For a consecutive sequence of PUSH packets, the last PUSH packet triggers encryption.' - '* TIMER - PUSH packet triggering encryption is delayed by the time defined in the set ssl parameter command or in the Change Advanced SSL Settings dialog box.' type: str validate_certs: default: true description: - If C(false), SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. required: false type: bool dtlsprofilename: description: - Name of the DTLS profile that contains DTLS settings for the service. type: str sendclosenotify: choices: - 'YES' - 'NO' description: - Enable sending SSL Close-Notify at the end of a transaction type: str nitro_auth_token: description: - The authentication token provided by a login operation. type: str version_added: 2.6.0 version_added_collection: netscaler.adc dhkeyexpsizelimit: choices: - ENABLED - DISABLED description: - This option enables the use of NIST recommended (NIST Special Publication 800-56A) bit size for private-key size. For example, for DH params of size 2048bit, the private-key size recommended is 224bits. This is rounded-up to 256bits. type: str redirectportrewrite: choices: - ENABLED - DISABLED description: - State of the port rewrite while performing HTTPS redirect. If this parameter is set to C(ENABLED), and the URL from the server does not contain the standard port, the port is rewritten to the standard. type: str strictsigdigestcheck: choices: - ENABLED - DISABLED description: - Parameter indicating to check whether peer's certificate during TLS1.2 handshake is signed with one of signature-hash combination supported by Citrix ADC type: str sslservice_ecccurve_binding: description: Bindings for sslservice_ecccurve_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservice_sslcipher_binding: description: Bindings for sslservice_sslcipher_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservice_sslpolicy_binding: description: Bindings for sslservice_sslpolicy_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservice_sslcertkey_binding: description: Bindings for sslservice_sslcertkey_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservicegroup_ecccurve_binding: description: Bindings for sslservicegroup_ecccurve_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservice_sslciphersuite_binding: description: Bindings for sslservice_sslciphersuite_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservicegroup_sslcipher_binding: description: Bindings for sslservicegroup_sslcipher_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservicegroup_sslcertkey_binding: description: Bindings for sslservicegroup_sslcertkey_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict sslservicegroup_sslciphersuite_binding: description: Bindings for sslservicegroup_sslciphersuite_binding resource suboptions: binding_members: default: [] description: List of binding members elements: dict type: list mode: choices: - desired - bind - unbind default: desired description: - The mode in which to configure the bindings. - If mode is set to C(desired), the bindings will be added or removed from the target NetScaler ADCs as necessary to match the bindings specified in the state. - If mode is set to C(bind), the specified bindings will be added to the resource. The existing bindings in the target ADCs will not be modified. - If mode is set to C(unbind), the specified bindings will be removed from the resource. The existing bindings in the target ADCs will not be modified. type: str type: dict
changed: description: Indicates if any change is made by the module returned: always sample: true type: bool diff: description: Dictionary of before and after changes returned: always sample: after: key2: pqr before: key1: xyz prepared: changes done type: dict diff_list: description: List of differences between the actual configured object and the configuration specified in the module returned: when changed sample: - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>) PQR' type: list failed: description: Indicates if the module failed or not returned: always sample: false type: bool loglines: description: list of logged messages by the module returned: always sample: - message 1 - message 2 type: list