netscaler.adc.vpnalwaysonprofile (2.5.1) — module

Install collection

Install with ansible-galaxy collection install netscaler.adc:==2.5.1

Add to requirements.yml

  collections:
    - name: netscaler.adc
      version: 2.5.1

Description

Configuration for AlwyasON profile resource.

Inputs

    
name:
    description:
    - name of AlwaysON profile
    type: str

nsip:
    description:
    - The ip address of the NetScaler ADC appliance where the nitro API calls will be
      made.
    - The port can be specified with the colon (:). E.g. 192.168.1.1:555.
    required: true
    type: str

state:
    choices:
    - present
    - absent
    - unset
    default: present
    description:
    - The state of the resource being configured by the module on the NetScaler ADC node.
    - When C(present), the resource will be added/updated configured according to the
      module's parameters.
    - When C(absent), the resource will be deleted from the NetScaler ADC node.
    - When C(unset), the resource will be unset on the NetScaler ADC node.
    type: str

api_path:
    default: nitro/v1/config
    description:
    - Base NITRO API path.
    - Define only in case of an ADM service proxy call
    type: str

nitro_pass:
    description:
    - The password with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

nitro_user:
    description:
    - The username with which to authenticate to the NetScaler ADC node.
    required: false
    type: str

save_config:
    default: false
    description:
    - If C(true) the module will save the configuration on the NetScaler ADC node if it
      makes any changes.
    - The module will not save the configuration on the NetScaler ADC node if it made
      no changes.
    type: bool

clientcontrol:
    choices:
    - ALLOW
    - DENY
    description:
    - Allow/Deny user to log off and connect to another Gateway
    type: str

nitro_protocol:
    choices:
    - http
    - https
    default: https
    description:
    - Which protocol to use when accessing the nitro API objects.
    type: str

validate_certs:
    default: true
    description:
    - If C(false), SSL certificates will not be validated. This should only be used on
      personally controlled sites using self-signed certificates.
    required: false
    type: bool

locationbasedvpn:
    choices:
    - Remote
    - Everywhere
    description:
    - Option to decide if tunnel should be established when in enterprise network. When
      locationBasedVPN is remote, client tries to detect if it is located in enterprise
      network or not and establishes the tunnel if not in enterprise network. Dns suffixes
      configured using -add dns suffix- are used to decide if the client is in the enterprise
      network or not. If the resolution of the DNS suffix results in private IP, client
      is said to be in enterprise network. When set to EveryWhere, the client skips the
      check to detect if it is on the enterprise network and tries to establish the tunnel
    type: str

nitro_auth_token:
    description:
    - The authentication token provided by a login operation.
    type: str
    version_added: 2.6.0
    version_added_collection: netscaler.adc

networkaccessonvpnfailure:
    choices:
    - onlyToGateway
    - fullAccess
    description:
    - Option to block network traffic when tunnel is not established(and the config requires
      that tunnel be established). When set to C(onlyToGateway), the network traffic to
      and from the client (except Gateway IP) is blocked. When set to C(fullAccess), the
      network traffic is not blocked
    type: str

Outputs

changed:
  description: Indicates if any change is made by the module
  returned: always
  sample: true
  type: bool
diff:
  description: Dictionary of before and after changes
  returned: always
  sample:
    after:
      key2: pqr
    before:
      key1: xyz
    prepared: changes done
  type: dict
diff_list:
  description: List of differences between the actual configured object and the configuration
    specified in the module
  returned: when changed
  sample:
  - 'Attribute `key1` differs. Desired: (<class ''str''>) XYZ. Existing: (<class ''str''>)
    PQR'
  type: list
failed:
  description: Indicates if the module failed or not
  returned: always
  sample: false
  type: bool
loglines:
  description: list of logged messages by the module
  returned: always
  sample:
  - message 1
  - message 2
  type: list