splunk / splunk.es / 0.0.2 / module / data_input_network Manage Splunk Data Inputs of type TCP or UDP | "added in version" 1.0 of splunk.es" Authors: Ansible Security Automation Team (@maxamillion) <https://github.com/ansible-security>splunk.es.data_input_network (0.0.2) — module
Install with ansible-galaxy collection install splunk.es:==0.0.2
collections: - name: splunk.es version: 0.0.2
This module allows for addition or deletion of TCP and UDP Data Inputs in Splunk.
- name: Example adding data input network with splunk.es.data_input_network splunk.es.data_input_network: name: "8099" protocol: "tcp" state: "present"
ssl: description: - Enable or disble ssl for the data stream required: false type: bool host: description: - Host from which the indexer gets data. required: false type: str name: description: - The input port which receives raw data. required: true type: str index: description: - default Index to store generated events. type: str queue: choices: - parsingQueue - indexQueue default: parsingQueue description: - Specifies where the input processor should deposit the events it reads. Defaults to parsingQueue. - Set queue to parsingQueue to apply props.conf and other parsing rules to your data. For more information about props.conf and rules for timestamping and linebreaking, refer to props.conf and the online documentation at "Monitor files and directories with inputs.conf" - Set queue to indexQueue to send your data directly into the index. required: false type: str state: choices: - present - absent - enabled - disable default: present description: - Enable, disable, create, or destroy required: false type: str source: description: - Sets the source key/field for events from this input. Defaults to the input file path. - 'Sets the source key initial value. The key is used during parsing/indexing, in particular to set the source field during indexing. It is also the source field used at search time. As a convenience, the chosen string is prepended with ''source::''. ' - 'Note: Overriding the source key is generally not recommended. Typically, the input layer provides a more accurate string to aid in problem analysis and investigation, accurately recording the file from which the data was retrieved. Consider use of source types, tagging, and search wildcards before overriding this value. ' type: str datatype: choices: - cooked - raw default: raw description: 'Forwarders can transmit three types of data: raw, unparsed, or parsed. C(cooked) data refers to parsed and unparsed formats. ' required: false type: str protocol: choices: - tcp - udp description: - Choose between tcp or udp required: true type: str sourcetype: description: - Set the source type for events from this input. - '"sourcetype=" is automatically prepended to <string>.' - Defaults to audittrail (if signedaudit=True) or fschange (if signedaudit=False). type: str restrictToHost: description: - Allows for restricting this input to only accept data from the host specified here. required: false type: str connection_host: choices: - ip - dns - none default: ip description: - Set the host for the remote server that is sending data. - C(ip) sets the host to the IP address of the remote server sending data. - C(dns) sets the host to the reverse DNS entry for the IP address of the remote server sending data. - C(none) leaves the host as specified in inputs.conf, which is typically the Splunk system hostname. required: false type: str rawTcpDoneTimeout: default: 10 description: - Specifies in seconds the timeout value for adding a Done-key. - If a connection over the port specified by name remains idle after receiving data for specified number of seconds, it adds a Done-key. This implies the last event is completely received. required: false type: int