wti / wti.remote / 1.0.5 / module / cpm_syslog_server_config Set network SYSLOG Server parameters in WTI OOB and PDU devices | "added in version" 2.11.0 of wti.remote" Authors: Western Telematic Inc. (@wtinetworkgear) preview | supported by communitywti.remote.cpm_syslog_server_config (1.0.5) — module
Install with ansible-galaxy collection install wti.remote:==1.0.5
collections: - name: wti.remote version: 1.0.5
Set network SYSLOG Server parameters in WTI OOB and PDU devices
# Sets the device SYSLOG Server Parameters - name: Set the an SYSLOG Server Parameter for a WTI device cpm_iptables_config: cpm_url: "nonexist.wti.com" cpm_username: "super" cpm_password: "super" use_https: true validate_certs: false interface: "eth0" protocol: 0 port: 514 transport: 0 secure: 0 clear: 1
# Sets the device SYSLOG Server Parameters - name: Set the SYSLOG Server Parameters a WTI device cpm_iptables_config: cpm_url: "nonexist.wti.com" cpm_username: "super" cpm_password: "super" use_https: true validate_certs: false interface: "eth0" protocol: 0 port: 514 transport: 0 secure: 0 clear: 1 index: - 1 - 2 block: - "192.168.50.4" - "72.76.4.56"
port: description: - Defines the port number used by the SYSLOG Server (1 - 65535). required: false type: int clear: choices: - 0 - 1 description: - Removes all the IP block entries for the protocol being defined before setting the newly defined entries. required: false type: int index: description: - Index of the IP block being modified. elements: int required: false type: list enable: choices: - 0 - 1 description: - Activates SYSLOG listening for the specified interface and protocol. required: false type: int secure: choices: - 0 - 1 description: - Defines if a secure connection is used by the SYSLOG Server (TCP Transport required). required: false type: int address: description: - Sets the IP Address to block message logging. elements: str required: false type: list cpm_url: description: - This is the URL of the WTI device to send the module. required: true type: str protocol: choices: - 0 - 1 description: - The protocol that the SYSLOG entry should be applied. 0 = ipv4, 1 = ipv6. required: false type: int interface: choices: - eth0 - eth1 - ppp0 - qmimux0 description: - The ethernet port for the SYSLOG we are defining. required: true type: str transport: choices: - 0 - 1 description: - Defines the transfer protocol type used by the SYSLOG Server. 0=UDP, 1=TCP; required: false type: int use_https: default: true description: - Designates to use an https connection or http connection. required: false type: bool use_proxy: default: false description: - Flag to control if the lookup will observe HTTP proxy environment variables when present. required: false type: bool cpm_password: description: - This is the Password of the WTI device to send the module. required: true type: str cpm_username: description: - This is the Username of the WTI device to send the module. required: true type: str validate_certs: default: true description: - If false, SSL certificates will not be validated. This should only be used - on personally controlled sites using self-signed certificates. required: false type: bool
data: contains: syslogserver: description: Current k/v pairs of interface info for the WTI device after module execution. returned: always sample: syslogserver: eth0: - ietf-ipv4: block: - address: '' index: '1' - address: '' index: '2' - address: '' index: '3' - address: '' index: '4' enable: 0 port: '514' secure: '0' transport: '0' ietf-ipv6: block: - address: '' index: '1' - address: '' index: '2' - address: '' index: '3' - address: '' index: '4' enable: 0 port: '514' secure: '0' transport: '0' type: dict description: The output JSON returned from the commands sent returned: always type: complex